Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H, body material - Stainles – Valve Elephant
Elephant  |  SKU : D160-57490

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H, body material - Stainless steel AISI 316, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA, 4V320-10 220V, BKV APL-410N Ex, handwheel MON

€381,19
Taxes incluses Frais de livraison calculés lors du paiement.

Livraison et expédition

Les frais de livraison sont déterminés lors du processus de paiement et varient en fonction de plusieurs facteurs, notamment le type de produit, le délai de livraison, le fournisseur de services et le pays de destination.

Si vous avez des questions sur nos produits, nos options de livraison ou toute autre chose, n'hésitez pas à nous contacter.

Description

Ball valve Elephant BV3232P(3pc)-FP-W-ISO-H Ру63/40/25 is used as shut-off valves in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of the BV3232P(3pc)-FP-W-ISO-H Ру63/40/25 series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.

The Elephant PA-DA double-acting pneumatic actuator is designed to automate the process of controlling industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for use both indoors and outdoors. All internal and external parts have an anti-corrosion coating.

Pneumatic distributor Elephant 4V320-10 220V is used to change the direction, start, stop the flow of compressed air in the pneumatic system depending on the external control action.

The Elephant APL-410N EX limit switch unit is an electrical device designed to open and close the working circuit and to visualize the positions of the shut-off element of pipeline valves. As a rule, a sealed box contains two mechanical switches rated for up to 250 V, which monitor the position of the actuator rod and signal in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color hemisphere of the visual indicator. If the connected pipeline valve is closed, then only the red part of the hemisphere with the inscription CLOSED is visible; if open, only the yellow part with the inscription OPEN. This visual indicator is clearly visible from afar, which simplifies the inspection of the equipment, and the color difference between the open and closed positions reduces the likelihood of erroneous perception of information. Thanks to the use of the BKV, it becomes possible to transmit information about the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics when faults are detected.

The Elephant MON manual override with worm gear and HDM reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution to the entire range of manual override tasks.

 

 

Technical parameters of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Rou63/40/25 c pneumatic actuator PA-DA double-acting, pneumatic valve 4V320-10 220V, BCV APL-410N EX, manual doubler MON:

Name Meaning
Working environment temperature, °C from -20 to 200
Type of crane device two-way
Application water supply, heat supply, steam supply
Working environment water, steam, petroleum products, neutral media
Connection to the pipeline for welding
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining for welding
Control double acting pneumatic actuator
Availability of limit switches There is
Availability of pneumatic distributor There is

 

 

Sketch of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Ru63/40/25 with double-acting pneumatic actuator PA-DA, pneumatic valve 4V320-10 220V, BCV APL-410N EX, manual doubler MON

 

Dimensions and dimensions of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Ru63/40/25 c pneumatic actuator PA-DA double action, pneumatic valve 4V320-10 220V, BCV APL-410N EX, manual doubler MON:

DN, mm L, mm D, mm F, mm L1, mm E, mm G, mm
10 63 17.2 98 153 120 147
15 65 21.3 98 153 120 147
20 75 26.7 98 153 120 147
25 83 33.5 98 153 120 147
32 98 42.2 115 174 120 147
40 112 48.3 135 216 133 147
50 135 60.5 135 216 133 147
65 175 73.2 135 216 133 147
80 198 88.9 160 279 180 147
100 246 114.3 160 279 180 147

 

 

Sketch of details and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Rou63/40/25

 

 

Table of parts and materials for ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Rou63/40/25:

Item No. Part name Material
1 Frame SS316
2 Ball valve S304/S316
3 Bolt S201/S304
4 screw S201/S304
5 Sealing PTFE
6 Stock SS304/SS316
7 Seal S201/S304
8 Sealing ring VITON
9 Lid WCB/CF8/CF8M
10 Saddle rings PPL
11 Thrust washer PTFE

 

 

Technical parameters of the PA-DA double-acting pneumatic actuator:

Name Meaning
Model PA-DA
Design double acting
Control pressure, bar 2 ÷ 8
Availability of manual backup steering wheel

 

 

Sketch of parts and materials of Elephant PA-DA double-acting pneumatic actuator

 

 

Parts and materials table for double-acting pneumatic actuator Elephant PA-DA:

No. Name Material
1 Frame extruded aluminum
2 Side plugs cast aluminum
3 Gear stainless steel
4 Piston steel/aluminum
5 Plugs stainless steel
6 Piston ring NBR
7 Springs spring steel
8 Piston bearing engineering plastic
9 Piston ring NBR
10 Plug NBR
11 Thrust ring engineering plastic
12 Ring engineering plastic
13 Washer stainless steel
14 Spring clamp stainless steel
15 Indicator plastic
16 Indicator housing plastic
17 Bearing engineering plastic
18 Cam steel
19 Bearing NBR
20 Bearing engineering plastic
21 Bearing engineering plastic
22 Sealing ring NBR
23 Sealing ring NBR
24 Bearing stainless steel
25 Adjusting nut stainless steel
26 Adjustment screw stainless steel
27 Sleeve aluminum

 

 

Technical parameters of the Elephant 4V320-10 220V pneumatic valve

Name Meaning
Type of pneumatic distributor spool valve
Model of pneumatic distributor 4V320-10 220V
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220 V
Response frequency, cycles/sec 5

 

 

Limit Switch Block Elephant APL-410N EX

 

Technical parameters of limit switch unit Elephant APL-410N EX

Name Meaning
Limit switch block model APL-410N EX
Service life, years 10


 

Parts and materials table for limit switch unit Elephant APL-410N EX:

Item No. Detail Material
1 Visual indicator ABS plastic / polycarbonate
2 Visual indicator cover polycarbonate
3 Label
4 Cover screws stainless steel
5 BKV housing cover aluminum die casting
6 Shaft stainless steel
7 Limit switches
8 Cams (eccentrics) polycarbonate
9 BKV case aluminum die casting
10 Terminal block
11 Ground terminal stainless steel
12 Hole (thread) for cable entry
13 bracket stainless steel

 

 

Sketch of manual backup Elephant MON

Technical parameters of manual backups Elephant MON:

Name Meaning
Degree of protection, IP 67
Connection type ISO 5211

 

 

Sketch of parts and materials of manual backup Elephant MON


Table of parts and materials of the manual backup Elephant MON:

No. Name Material
1 Rod for mounting a pneumatic actuator Steel 45
2 Sealing ring EPDM
3 Locking spring Spring steel
4 Top end cap Aluminum alloy
5 Screw Steel 304
6 Fixing bracket (main rod) Steel 304
7 Frame Aluminum alloy
8 Sealing ring EPDM
9 Reducer Cast iron VCh50
10 Transition coupling Cast iron VCh40
11 Gearbox rod Cast iron VCh40

Avis (0)

Documentation

Paiement et sécurité

Moyens de paiement

    Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

    Variantes disponibles

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-57490DN1063 bar €381,19 Out of stock
    D160-57491DN1563 bar €381,21 Out of stock
    D160-57492DN2063 bar €389,48 Out of stock
    D160-57493DN2563 bar €367,87 Out of stock
    D160-57494DN3263 bar €362,27 Out of stock
    D160-57495DN4040 bar €430,52 Out of stock
    D160-57496DN5040 bar €460,29 Out of stock
    D160-57497DN6525 bar €564,35 Out of stock
    D160-57498DN8025 bar €736,94 Out of stock
    D160-57499DN10025 bar €952,39 Out of stock

    Questions fréquemment posées

    Expédition

    Dans quels pays expédiez-vous ?

    Nous proposons actuellement des livraisons en France et dans toute l'UE, ainsi que des options de livraison internationales. Si vous avez une destination spécifique en tête qui n'est pas répertoriée, n'hésitez pas à nous contacter pour plus d'informations.

    Combien de temps faudra-t-il pour recevoir ma commande ?

    L'expédition standard prend normalement 3 à 7 jours. L'expédition le lendemain est disponible pour toutes les commandes nationales (moyennant des frais supplémentaires). Les délais d'expédition internationaux dépendent des produits et de la destination (estimés au moment du paiement).

    Retours et remboursements

    Comment retourner un produit ?

    Les articles doivent être retournés dans les 30 jours suivant la réception de votre commande. Les articles doivent être retournés dans le même état dans lequel ils ont été reçus, ne pas être portés/utilisés, avoir toutes les étiquettes encore attachées et inclure tous les emballages d'origine.

    Combien de temps faudra-t-il pour recevoir mon remboursement ?

    Les remboursements sont traités dans les 7 jours suivant la réception des articles.