Ball valves Elephant BV3232P(3pc)-FP-F-ISO-H 16 bar, three-piece full bore flanged, stainless steel SS316, PTFE, with pneumatic actuator PA-DA, with pneumatic distributor 4M310-08 220V, with BKV APL- 410N EX, with manual Doubler MON1-250-T26-ISO, with BPV

Ball valve Elephant model BV3232P(3pc)-FP-F-ISO-H PA-DA 4M310-08 APL-410N Ex MON AFC2000 is used as a shut-off valve in heating, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) not aggressive to valve materials.

Pneumatic rotary actuators Ball valves Elephant BV3232P(3pc)-FP-F-H DN15-100 Ru40, three-piece full bore flanged, stainless steel SS316, PTFE, with pneumatic actuator PA-DA, with pan. distributor 4M310-08 220V, with APL-410N EX BCV, with MON1-250-T26-ISO handwheel, with AFC2000 BPV are designed for automation of control process of industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.

Pneumatic valves 4M310-08 are used for control in pneumatic systems having NAMUR docking surface for installation of valves through through holes in the housing.

The APL-410N EX limit switch unit is designed for visual and electrical signalling of end positions of the valve shut-off body. It is mounted from above on the surface of the pneumatic actuator and connected to the actuator shaft - DIN standard. The sealed box usually contains two sensors which monitor the position of the actuator shaft and signalise the end positions. The visual indication of the position can be observed on the unit's casing there is a 3D visual indicator RED-CLOSED and YELLOW-OPEN.

The AFC2000 air treatment unit is designed to clean compressed air from moisture and solid particles, remove condensate, automatically maintain the pressure at a preset level, supply lubricant from the tank into the compressed air flow to the pneumatic system elements with a large capacity range from 500 litres/minute to 10,000 litres/minute. The lubricator (oil atomiser) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic valves.

Technical characteristics of ball valves Elephant BV3232P(3pc)-FP-F-ISO-H 16 bar, three-piece full bore flanged, stainless steel SS316, PTFE

Ball valve component materials Elephant BV3232P(3pc)-FP-F-ISO-H 16 bar, three-piece full bore flanged, stainless steel SS316, PTFE

Ball valve material sketch Elephant BV3232P(3pc)-FP-F-ISO-H 16 bar, three-piece full bore flanged, stainless steel SS316, PTFE

Technical data of pneumatic actuators PA-DA

Materials of pneumatic actuator parts PA-DA

Here’s the translation:

Material sketch of the pneumatic actuator PA-DA

Technical data of pneumatic valve 4M310-08 220V

Technical data of the AFC2000 air supply unit

Technical characteristics of limit switch unit APL-410N EX

Here is the translation:

Materials of limit switch unit APL-410N EX

Materials of the handwheel Elephant HDM

Materials of the Elephant MON handwheel