Ball valves Elephant BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-410N EX, with BPV AFC2000

The ball valve is used as a shut-off valve in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve. Use of ball valves as regulating valves is not allowed.

Pneumatic rotary actuator is designed to automate the process of control of industrial valves, as well as to determine the position of the valve shut-off body.

Pneumatic valve is used to change the direction, start, stop the flow of compressed air in the pneumatic system depending on the external control action.

Limit switch unit is an electrical device designed for opening and closing of the working circuit and for visualization of the positions of the valve shut-off body. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Thanks to the use of the ACB it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.

The air treatment unit is designed to clean compressed air from moisture and solid particles, remove condensate, automatically maintain the pressure at the preset level, supply lubricant from the tank in the compressed air flow to the pneumatic system elements.

Technical parameters Elephant BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-410N EX, with BPV AFC2000:

Elephant BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-410N EX, with BPV AFC2000

Dimensions and dimensions Elephant BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-410N EX, with BPV AFC2000:

Sketch of dimensions and dimensions BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-410N EX, with BPV AFC2000

Parts and materials table BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-410N EX, with BPV AFC2000:

Parts and material sketch Elephant BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-410N EX, with BPV AFC2000

Technical parameters of pneumatic actuator PA-DA-105-1:

Pneumatic actuator PA-DA-105-1

Dimensions and dimensions of the pneumatic actuator PA-DA-105-1:

Sketch of dimensions and dimensions of pneumatic actuator PA-DA-105-1

PA-DA-105-1 air actuator parts and materials table:

Parts and material sketch of the PA-DA-105-1 pneumatic actuator

Technical parameters of pneumatic valve 4V320-08 220V:

Pneumatic valve 4V320-08 220V

Dimensions and dimensions of pneumatic valve 4V320-08 220V:

Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V

Technical parameters of limit switch unit APL-410N EX:

Limit switch unit APL-410N EX

Dimensions and dimensions of limit switch unit APL-410N EX:

Sketch of dimensions and dimensions of limit switch unit APL-410N EX

Main parameters of the AFC2000 air treatment unit:

Air treatment unit AFC2000