Water Butterfly Valve Elephant WBV3131E-2W-Fb-H, wafer, body - stainless steel 304, disk - stainless steel 304, seal - EPDM, with pneumatic drive PA-DA-105-1, with pneumatic distributor 4V320-10 220V, BKV APL-510N Ex

Butterfly valves Elephant WBV3131E-2W-Fb-H are designed for use as shut-off or regulating valves to control flows in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.

Pneumatic valve Elephant 4V320-10 220V is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.

The Elephant APL-510N EX limit switch unit is an electrotechnical device designed to open and close the working circuit and to visualize the positions of the shut-off valve shut-off body. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. By using the AFC2000, it becomes possible to transmit information on the position of the pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.

The AFC2000 air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain pressure at a preset level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system with a wide range of throughput from 500 liters/minute to 10 000 liters/minute. The lubricator adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components such as pneumatic cylinders and pneumatic valves.

Technical parameters of Butterfly valves Elephant WBV3131E-2W-Fb-H, wafer, body - stainless steel 304, disk - stainless steel 304, EPDM

Dimensions and dimensions of Butterfly valves Elephant WBV3131E-2W-Fb-H, wafer, body - stainless steel 304, disk - stainless steel 304, EPDM

Sketch of Swivel Disc Gates Elephant WBV3131E-2W-Fb-H, wafer, body - stainless steel 304, disk - stainless steel 304, EPDM

Table of parts and materials for butterfly valves Elephant WBV3131E-2W-Fb-H, wafer, body - stainless steel 304, disk - stainless steel 304, EPDM

Sketch of parts and materials of rotary disc gate valves Elephant WBV3131E-2W-Fb-H, wafer, body - stainless steel 304, disk - stainless steel 304, EPDM

Technical parameters of pneumatic valve Elephant 4V320-10 220V

Technical parameters of limit switch unit Elephant APL-510N EX

Parts and materials table for Elephant APL-510N EX limit switch unit