Elephant | SKU : D050-35050

Vanne papillon d'eau Elephant WBV1413E-2W-Fb-H, matériau du corps - fonte GGG50, matériau du disque - fonte GGG40, joint - EPDM, avec actionneur pneumatique double effet PA-DA, 4V320-08 220V, volant MON, BKV APL-210N, BPV AFC2000

€385,43

Taxes incluses Frais de livraison calculés lors du paiement.

Taille de la connexion

Pression

Variantes de produit

Livraison et expédition

Les frais de livraison sont déterminés lors du processus de paiement et varient en fonction de plusieurs facteurs, notamment le type de produit, le délai de livraison, le fournisseur de services et le pays de destination.

Si vous avez des questions sur nos produits, nos options de livraison ou toute autre chose, n'hésitez pas à nous contacter.

Description

The butterfly valve is designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.

Pneumatic double-acting rotary actuators PA-DAXXX and pneumatic rotary actuators with return spring PA-SA-XXX are designed for automation of industrial valve control process with maximum torque up to 2128 Nm.

The pneumatic valve is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.

The HDM worm gear manual doubleturn actuator with reduction gearbox allows manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.

The limit switch unit is designed for visual and electrical signaling of the end positions of the valve shut-off device: valve, crane or disk gate. It is mounted on top of the pneumatic actuator surface and connected to the actuator shaft in DIN standard. The sealed box usually contains two sensors that monitor the position of the actuator shaft and signalize in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. Visual indication of the position can be observed on the housing of the unit there is a 3D visual indicator RED-CLOSED and GREEN-OPEN.

The air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain the pressure at the preset level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system.

Technical parameters of Elephant WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, BKV APL-210N, BPV AFC2000:

Name	Significance
Working pressure, bar	16
Working medium temperature, °С	from -20 to 120
Application	water supply, heating
Connection to pipeline	interflanged
Gate type	swivel disk
Sealing class of the ball valve	A according to GOST 9544
Control type	pneumatic actuator
Manufacturer's country	China

Затворы дисковые поворотные DN.ru WBV1413E-2W-Fb Ду40-300 Ру16, чугун, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4V320-08 220В, с БКВ APL-210N, с ручным дублером MON, с БПВ AFC2000

Butterfly valves WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, BKV APL-210N, BPV AFC2000

Dimensions and dimensions of butterfly valves Elephant WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, BKV APL-210N, BPV AFC2000:

DN	B, mm	L, mm	H, mm	H2, mm	E, mm	B1, mm	C, mm	D, mm	X, mm	Y, mm
40	55	33	77	105	26	108	44	40	162	139
50	80	43	77	161	26	125	44	50	162	139
65	89	45	77	175	26	125	44	65	162	139
80	95	45	77	181	26	152	44	80	162	139
100	114	52	77	200	26	152	62.5	100	162	139
125	127	55	77	213	26	152	62.5	125	162	139
150	139	55	77	226	26	189	70	150	162	139
200	175	60	77	260	36	210	70	200	162	139
250	203	68	77	292	36	268	94	250	162	139
300	242	78	77	337	36	268	94	300	162	139

Sketch Butterfly valves WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, BKV APL-210N, BPV AFC2000

Materials of butterfly valves Elephant WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, BKV APL-210N, BPV AFC2000:

№	Name	Material
1	Body	Cast iron GGG50
2	Disk	High-strength cast iron GGG40
3	Seat seal	EPDM
4	Upper stem	AISI 420 steel
5	Lower stem	AISI 420 steel
6, 11	Retaining ring	AISI 201 steel
7	Duster	NBR
8	Stem gasket	NBR
9	Shaft gasket	AISI 201 steel
10	Plug	plastic

Затворы дисковые поворотные DN.ru WBV1413E-2W-Fb Ду40-300 Ру16, корпус - чугун GGG50, диск - чугун GGG40, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4M310-08 220В, с БКВ APL-510N-EX

Sketch of parts and materials Butterfly valves WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, BKV APL-210N, BPV AFC2000

Technical data of PA-DA pneumatic actuators:

Design	Double action
Nominal pressure PN, bar	12
Working pressure, bar	2...8
Working medium	Filtered compressed air or non-aggressive gases, oils
Maximum particle diameter	less than 30 µm2
Operating temperature t, ⁰C	- 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air)
Adjustment range	± 5 ° for rotation at 0 ° and 90 °
Manual override	is
Position indicator	open/closed
Operating environment	indoors and outdoors. (All internal and external parts are anti-corrosion coated)

Затворы дисковые поворотные DN.ru WBV0232E-2W-Fb Ду25-32 Ру16, корпус - алюминевый сплав, диск - нержавеющая сталь 316L, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4V320-08 220В

PA-DA pneumatic actuator

PA-DA pneumatic actuator component materials:

№	Name	Material
1	Enclosure	extruded aluminum
2	Side plugs	cast aluminum
3	Gear	stainless steel
4	Piston	steel/aluminum
5	Plugs	stainless steel
6	Piston ring	NBR
7	Springs	spring steel
8	Piston bearing	engineering plastic
9	Piston ring	NBR
10	Plug	NBR
11	Thrust ring	engineering plastic
12	Ring	engineering plastic
13	Washer	stainless steel
14	Spring clip	stainless steel
15	Indicator	plastic
16	Indicator housing	plastic
17	Bearing	engineering plastic
18	Cam	steel
19	Bearing	NBR
20	Bearing	engineering plastic
21	Bearing	engineering plastic
22	Sealing ring	NBR
23	Sealing ring	NBR
24	Bearing	stainless steel
25	Adjustment nut	stainless steel
26	Adjustment screw	stainless steel
27	Sleeve	aluminum

Parts and material sketch of the PA-DA pneumatic actuator

Technical parameters of pneumatic valve 4V320-08 220V:

Name	meaning
Type of pneumatic valve	slide valve
Working pressure, bar	1.5 ÷ 1.8
Supply voltage, V	220 В
Total power, Va	4.5
Control	double-sided electromagnetic
Frequency of operation, cycle/sec	5

Pneumatic valve 4V320-08 220V

Dimensions and dimensions of pneumatic valve 4V320-08 220V:

Pneumatic valve model	4V320-08
A, mm	71.9
B, mm	45
C, mm	94.4
D, mm	27
E, mm	69
F, mm	40
I, mm	24
K, mm	40
L, mm	188.8
M, mm	69.4
N, mm	50
O, mm	82.4
P, mm	24
S, mm	20
T, mm	6.5
U, mm	2.4
V, mm	4
H, mm	82.4

Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V

Technical parameters of the handwheel MON:

Name	Value
Climatic version	U,UHL,T,OM
Degree of protection, IP	67
Connection type	ISO 5211

Manual doubler MON

Dimensions and dimensions of the handwheel MON:

Model	MON1-250-T26-ISO	MON2-450-T28-ISO	MON3-700-T38-ISO	MON4-1200-T54-ISO
b1, mm	14	17	22	27
N, mm	22	22	28	32
b2, mm	14	17	22	27
M, mm	16	18	22	30
D1, mm	Ø50	Ø70	Ø102	Ø102
4-M1, mm	4-M6	4-M8	4-M10	4-M10
D2, mm	Ø70	Ø102	Ø125	Ø125
4-M2, mm	4-M8	4-M10	4-M12	4-M12
E, mm	70х70	95х95	114х114	129х129
D3, mm	Ø50	Ø70	Ø102	Ø125
4-Ø1, mm	4-Ø6.5	4-Ø8.5	4-Ø10.5	4-Ø12.5
D4, mm	Ø70	Ø102	Ø125	Ø140
4-Ø2, mm	4-Ø8.5	4-Ø10.5	4-Ø12.5	4-Ø16.5
A, mm	90	125	140	188.5
B, mm	55	64	71	93
ØC, mm	Ø88	Ø110	Ø129	Ø174
F, mm	115	135	166	202
T, mm	44	62.5	70	94
Y, mm	145	178	212	280
H, mm	120	133	180	195
S, mm	53	56.5	68.7	84
K, mm	10	13	12.5	15
Ø hand wheel, mm	180	200	280	320

Sketch of dimensions and dimensions of the MON handwheel MON

MON handwheel materials:

№	Name	Material
1	Stem for mounting the pneumatic actuator	Steel 45
2	Sealing ring	EPDM
3	Fixing spring	Spring steel
4	Upper end cover	Aluminum alloy
5	Screw	Steel 304
6	Locking bracket (main rod)	Steel 304
7	Housing	Aluminum alloy
8	Sealing ring	EPDM
9	Gear unit	Cast iron BCh50
10	Transition coupling	Cast iron BCh40
11	Gear stem	Cast iron BCh40

Materials of the handwheel

Technical parameters of limit switch unit APL-210N:

Name	Value
Model of limit switch unit	APL-210N
Maximum voltage of limit switch, V	250
Working environment temperature, °С	-40 to +80
Service life, years	10

Limit switch unit APL-210N

Dimensions and dimensions of the APL-210N limit switch unit:

Model	Н, mm	L, mm	B, mm	D, mm	D1, mm	M
APL-210N	77	112	88	10	5	20х1.5

Sketch of dimensions and dimensions of limit switch unit APL-210N

Main parameters of the AFC2000 air treatment unit:

Operating pressure, bar	8
Maximum pressure, bar	10
Adjustable pressure range, bar	0,5 ÷ 9
Breaking pressure, bar	15
Air connection	1/4”
Operating temperature, C	-5 to +60
Filter particle size, µm	40
Oil viscosity	ISO VG 32
Weight, kg	0,395
Set composition	filter-moisture separator, pressure regulator, lubricator, bracket

Air treatment unit AFC2000

Avis (0)

Paiement et sécurité

Moyens de paiement

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Variantes disponibles

SKU	Taille de la connexion	Pression	Price	Availability	Quantity
D050-35050	DN100	16 bars	€385,43	77 in stock	Qty
D050-35080	DN125	16 bars	€395,44	77 in stock	Qty
D050-35110	DN150	16 bars	€477,24	77 in stock	Qty
D050-35140	DN200	16 bars	€586,58	77 in stock	Qty
D050-35169	DN250	16 bars	€748,32	77 in stock	Qty
D050-35198	DN300	16 bars	€837,11	77 in stock	Qty
D050-35230	DN40	16 bars	€306,06	77 in stock	Qty
D050-35259	DN50	16 bars	€317,14	77 in stock	Qty
D050-35288	DN65	16 bars	€322,61	77 in stock	Qty
D050-35317	DN80	16 bars	€345,94	77 in stock	Qty

Questions fréquemment posées

Expédition

Dans quels pays expédiez-vous ?

Nous proposons actuellement des livraisons en France et dans toute l'UE, ainsi que des options de livraison internationales. Si vous avez une destination spécifique en tête qui n'est pas répertoriée, n'hésitez pas à nous contacter pour plus d'informations.

Combien de temps faudra-t-il pour recevoir ma commande ?

L'expédition standard prend normalement 3 à 7 jours. L'expédition le lendemain est disponible pour toutes les commandes nationales (moyennant des frais supplémentaires). Les délais d'expédition internationaux dépendent des produits et de la destination (estimés au moment du paiement).

Retours et remboursements

Comment retourner un produit ?

Les articles doivent être retournés dans les 30 jours suivant la réception de votre commande. Les articles doivent être retournés dans le même état dans lequel ils ont été reçus, ne pas être portés/utilisés, avoir toutes les étiquettes encore attachées et inclure tous les emballages d'origine.

Combien de temps faudra-t-il pour recevoir mon remboursement ?

Les remboursements sont traités dans les 7 jours suivant la réception des articles.