Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H, body material - Stainless steel AISI 316, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA, 4V320-10 220V, BKV APL-210N, handwheel MON

Ball valve Elephant BV3232P(3pc)-FP-W-ISO-H Ру63/40/25 is used as shut-off valves in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of the BV3232P(3pc)-FP-W-ISO-H Ру63/40/25 series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.

The Elephant PA-DA double-acting pneumatic actuator is designed to automate the process of controlling industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for use both indoors and outdoors. All internal and external parts have an anti-corrosion coating.

Pneumatic distributor Elephant 4V320-10 220V is used to change the direction, start, stop the flow of compressed air in the pneumatic system depending on the external control action.

The Elephant APL-210N limit switch unit is an electrical device designed to open and close the working circuit and to visualize the positions of the shut-off element of pipeline valves. As a rule, a sealed box contains two mechanical switches rated for up to 250 V, which monitor the position of the actuator rod and signal in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color hemisphere of the visual indicator. If the connected pipeline valve is closed, then only the red part of the hemisphere with the inscription CLOSED is visible; if open, only the yellow part with the inscription OPEN. This visual indicator is clearly visible from afar, which simplifies the inspection of the equipment, and the color difference between the open and closed positions reduces the likelihood of erroneous perception of information. Thanks to the use of the BKV, it becomes possible to transmit information about the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics when faults are detected.

The Elephant MON manual override with worm gear and HDM reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution to the entire range of manual override tasks.

Technical parameters of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H RU63/40/25 with double-acting pneumatic actuator PA-DA, pneumatic distributor 4V320-10 220V, BKV APL-210N, manual backup MON:

Sketch of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Ru63/40/25 with double-acting pneumatic actuator PA-DA, pneumatic distributor 4V320-10 220V, BKV APL-210N, manual backup MON

Dimensions and sizes of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H RU320-10 220V, BKV APL-210N, manual backup MON:

Sketch of parts and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Ru63/40/25

Table of parts and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H RU63/40/25:

Technical parameters of the PA-DA double-acting pneumatic actuator:

Sketch of parts and materials of Elephant PA-DA double-acting pneumatic actuator

Parts and materials table for double-acting pneumatic actuator Elephant PA-DA:

Technical parameters of the Elephant 4V320-10 220V pneumatic valve

Limit Switch Block Elephant APL-210N

Technical parameters of the limit switch unit Elephant APL-210N

Table of parts and materials of the limit switch block Elephant APL-210N:

Sketch of manual backup Elephant MON

Technical parameters of manual backups Elephant MON:

Sketch of parts and materials of manual backup Elephant MON

Table of parts and materials of the manual backup Elephant MON: