Elephant  |  SKU: D050-26284

Water Butterfly Valve Elephant WBV3232E-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator with return springs PA-SA, BKV APL-510N-EX

€314,16
Impuestos incluidos. Los gastos de envío se calcularán al momento de pagar.

Entrega y envío

El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.

Si tiene alguna pregunta sobre nuestros productos, opciones de envío o cualquier otra cosa, no dude en comunicarse con nosotros.

Descripción

Butterfly valve WBV3232E-2W-Fb PA-SA APL-510N-EX is designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.

SA pneumatic actuators are designed for automation of control process of industrial shut-off valves - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.

APL-510N-EX limit switch unit is an electrotechnical device designed for opening and closing of the working circuit and for visualization of positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of fault detection.

 

 

Technical parameters of Elephant WBV3232E-2W-Fb-H water disc gate valves, body material - stainless steel AISI 316L, disc material - stainless steel AISI 316L, sealing - EPDM, with pneumatic actuator with return springs PA-SA, BKV APL-510N-EX:

Nominal diameter DN, mm 40 - 300
Nominal pressure PN, MPa (kg/cm2) 1,6 (16)
Flow direction bilateral
Working medium temperature t, ⁰C 20 to +85 for NBR
-20 to +120 for EPDM
-10 to +180 for PTFE
Tightness in the gate Class A GOST 9544-2015
Working medium EPDM: cold and hot water, air without oil and grease, other media neutral to the material
PTFE: water, alkalis, acids, solvents and oxidizing agents
NBR: water, mineral oils, hydrocarbons,
oils, fats
Connection to pipeline interflange

Затворы дисковые поворотные DN.ru WBV3232E-2W-Fb Ду40-300 Ру16, корпус - нержавеющая сталь 316L, диск - нержавеющая сталь 316L, уплотнение - EPDM, с пневмоприводом PA-SA-083-210 с возвратными пружинами и блоком концевых выключателей APL-510N-EX

Gate WBV3232E-2W-Fb PA-SA APL-510N-EX

 

 

Dimensions and dimensions of Elephant WBV3232E-2W-Fb-H water disc gate valves, body material - stainless steel AISI 316L, disc material - stainless steel AISI 316L, sealing - EPDM, pneumatically operated with return springs PA-SA, BKV APL-510N-EX:

DN A, mm B, mm C, mm E, mm G, mm L, mm M, mm
40 340.4 56 109 153 101 33 121.4
50 392.4 76 109 153 101 45 121.4
65 430.4 89 134 279 119 48 121.4
80 436.4 95 134 279 119 49 121.4
100 455.4 114 134 279 119 55 121.4
125 491.4 127 157 308 137.5 58 121.4
150 503.4 140 157 308 137.5 59 121.4
200 580.4 177 199 465 175 64 121.4
250 670.4 203 257 542 226 70 121.4
300 715.4 242 257 542 226 80 121.4

Затворы дисковые поворотные DN.ru WBV3232E-2W-Fb Ду40-300 Ру16, корпус - нержавеющая сталь 316L, диск - нержавеющая сталь 316L, уплотнение - EPDM, с пневмоприводом PA-SA-083-210 с возвратными пружинами и блоком концевых выключателей APL-510N-EX

Gate sketch WBV3232E-2W-Fb PA-SA APL-510N-E

 

 

Materials Elephant WBV1432N-2W-Fb-H water disc gate valve, body material - cast iron GGG50, disc material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator with return springs PA-SA, BKV APL-510N-EX:

Name Material
1 Body Stainless steel AISI 316L
2 Cuff EPDM
3 Disk Stainless steel AISI 316L
4 Stem Stainless steel AISI 316L
5 Stud Stainless steel AISI 316L
6 Sleeve PTFE
7 O-ring NBR (nitrile)
8 plate Carbon steel

Затворы дисковые поворотные DN.ru WBV3232E-2W-Fb Ду40-300 Ру16, корпус - нержавеющая сталь 316L, диск - нержавеющая сталь 316L, уплотнение - EPDM, с пневмоприводом PA-SA-083-210 с возвратными пружинами и блоком концевых выключателей APL-510N-EX

Sketch of detailing of gate WBV3232E-2W-Fb PA-SA APL-510N-EX

 

Technical data of SA pneumatic actuators

Design with return springs
Nominal pressure PN, bar 12
Working pressure, bar 2...8
Working medium Filtered compressed air or non-aggressive gases, oils
Maximum particle diameter less than 30 µm2
Operating temperature t, ⁰C - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air)
Adjustment range ± 5 ° for rotation at 0 ° and 90 °
Manual override is
Position indicator open/closed
Operating environment indoors and outdoors. (All internal and external parts are anti-corrosion coated)

 

Materials of SA pneumatic actuator parts:

Name Material
1 Enclosure extruded aluminum
2 Side plugs cast aluminum
3 Gear stainless steel
4 Piston steel/aluminum
5 Plugs stainless steel
6 Piston ring NBR
7 Springs spring steel
8 Piston bearing engineering plastic
9 Piston ring NBR
10 Plug NBR
11 Thrust ring engineering plastic
12 Ring engineering plastic
13 Washer stainless steel
14 Spring clip stainless steel
15 Indicator plastic
16 Indicator housing plastic
17 Bearing engineering plastic
18 Cam steel
19 Bearing NBR
20 Bearing engineering plastic
21 Bearing engineering plastic
22 Sealing ring NBR
23 Sealing ring NBR
24 Bearing stainless steel
25 Adjustment nut stainless steel
26 Adjustment screw stainless steel
27 Sleeve aluminum

Затворы дисковые поворотные DN.ru WBV1132N-2W-Fb Ду40-300 Ру16, корпус - чугун GG25, диск - нержавеющая сталь 316L, уплотнение - NBR, с пневмоприводом PA-SA-083-210 с возвратными пружинами и блоком концевых выключателей APL-510N-EX

Material sketch of SA pneumatic actuator

 

Characteristics of limit switch unit APL-510N-EX:

Parameter Significance
Enclosure all-weather IP67/ NEMA4 4X,7,9
explosion-proof E EX d IIC T6
Compatible devices quarter-turn pneumatic actuators;
- any actuators with shaft rotation by 90
Full rotation angle 90°
Cable glands 2 x NPT 3/4”
Electrical connection screw terminals 8 points (0.08 - 2.5) mm2
Cable gland thread 2 x NPT 3/4”
Type of visual indicator two-color hemisphere: OPEN (Open) - yellow CLOSED (Closed) - red
Switches/sensors two mechanical switches two proximity sensors
Rated voltage, V 250
Rated current, A 16
Permissible ambient temperature, °С от -20 до +66
Average life, cycles 10 000 000
Weight, kg 1.8

Затворы дисковые поворотные DN.ru WBV1132N-2W-Fb Ду40-300 Ру16, корпус - чугун GG25, диск - нержавеющая сталь 316L, уплотнение - NBR, с пневмоприводом PA-SA-083-210 с возвратными пружинами и блоком концевых выключателей APL-510N-EX

Wiring diagram of limit switch unit APL-510N-EX

Especificaciones

  • País de origen
    China
  • Temperatura máxima permitida
    120 °C
  • Tipo de conexión
    compact flanged
  • Tipo de sello
    EPDM
  • Material del disco
    stainless steel AISI 316L
  • Anulación manual
    No
  • Interruptores de límite
    Yes
  • Sensor de retroalimentación
    Limit switches
  • Tipo de actuador neumático
    with return springs

Reseñas (0)

Pago y seguridad

Métodos de pago

    Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

    Variantes disponibles

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D050-26284DN4016 bar €314,16 77 in stock
    D050-26285DN5016 bar €318,94 77 in stock
    D050-26286DN6516 bar €404,38 77 in stock
    D050-26287DN8016 bar €412,79 77 in stock
    D050-26288DN10016 bar €492,42 77 in stock
    D050-26289DN12516 bar €626,60 77 in stock
    D050-26290DN15016 bar €613,61 77 in stock
    D050-26291DN20016 bar €1.169,11 77 in stock
    D050-26386DN25016 bar €1.604,79 77 in stock
    D050-26387DN30016 bar €1.959,27 77 in stock

    Preguntas frecuentes

    Envío

    ¿A qué países realizan envíos?

    Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.

    ¿Cuánto tiempo tardaré en recibir mi pedido?

    El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).

    Devoluciones y reembolsos

    ¿Cómo devuelvo un producto?

    Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.

    ¿Cuánto tiempo tardaré en recibir mi reembolso?

    Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.