Water Butterfly Valve Elephant WBV1132N-2W-Fb-H, body material - grey cast iron GG25, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA-105-1, 4V320-08 220V, BKV APL-210N, BPV AFC2000
Water Butterfly Valve Elephant WBV1132N-2W-Fb-H, body material - grey cast iron GG25, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA-105-1, 4V320-08 220V, BKV APL-210N, BPV AFC2000 - DN125 / 16 bar está agotado y se enviará tan pronto como vuelva a estar disponible.
No se ha podido cargar la disponibilidad de recogida
Entrega y envío
Entrega y envío
El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.
Descripción
Descripción
The butterfly valve is designed for use as shut-off or regulating valves for controlling flows in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
PA-DA-105-1 double-acting pneumatic rotary actuators are designed for automation of industrial valve control process with maximum torque up to 2128 Nm.
Pneumatic distributor is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.
The limit switch unit is designed for visual and electrical signaling of the end positions of the valve shut-off device: valve, crane or disk gate. It is mounted on top of the pneumatic actuator surface and connected to the actuator shaft in DIN standard. The sealed box usually contains two sensors, which monitor the position of the actuator shaft and signalize in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. Visual indication of the position can be observed on the housing of the unit there is a 3D visual indicator RED-CLOSED and GREEN-OPEN.
The air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain the pressure at the preset level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system.
Technical parameters of Elephant WBV1132N-2W-Fb-H butterfly valves, body material - gray cast iron GG25, disc material - stainless steel AISI 316L, sealing - NBR, with double-acting pneumatic actuator PA-DA-105-1, 4V320-08 220V, BKV APL-210N, BPV AFC2000:
Name | Significance |
Working pressure, bar | 16 |
Application | water supply, heating |
Connection to pipeline | interflanged |
Gate type | swivel disk |
Sealing class of the ball valve | A according to GOST 9544 |
Control type | pneumatic actuator |
Manufacturer's country | China |
Butterfly valves WBV1132N-2W-Fb-H, body material - grey cast iron GG25, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA-105-1, 4V320-08 220V, BKV APL-210N, BPV AFC2000
Dimensions and dimensions of butterfly valves Elephant WBV1132N-2W-Fb-H, body material - gray cast iron GG25, disc material - stainless steel AISI 316L, sealing - NBR, with double-acting pneumatic actuator PA-DA-105-1, 4V320-08 220V, BKV APL-210N, BPV AFC2000:
DN | A, mm | B, mm | A1, mm | W, mm | I, mm | С, mm |
125 | 178 | 125 | 495 | 200 | 162 | 139 |
150 | 191 | 140 | 495 | 200 | 162 | 139 |
Sketch Butterfly valves WBV1132N-2W-Fb-H, body material - grey cast iron GG25, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA-105-1, 4V320-08 220V, BKV APL-210N, BPV AFC2000
Technical parameters of pneumatic actuator PA-DA-105-1:
Name | Significance |
Construction | double action |
Rated torque, Nm | 202 |
Angle of rotation of actuator | 90° |
Working pressure, bar | 8 |
Working medium | filtered compressed air or non-aggressive gases, oils |
Pneumatic actuator PA-DA-105-1
Dimensions and dimensions of the pneumatic actuator PA-DA-105-1:
A, mm | 495 |
A1, mm | 461.5 |
B, mm | 133 |
C, mm | 109.5 |
D, mm | 153 |
E, mm | 57.5 |
F, mm | 64 |
G, mm | 26 |
H, mm | 80 |
I, mm | 30 |
N, mm | 22 |
W, mm | 200 |
J, mm | 102 |
K, mm | 70 |
L, mm | М10х16 |
M, mm | М8х13 |
O, mm | 4 |
P, mm | 4 |
S, mm | M6 |
T, mm | 24 |
U, mm | 32 |
Sketch of dimensions and dimensions of pneumatic actuator PA-DA-105-1
PA-DA-105-1 air actuator parts and materials table:
№ | Name | Material |
1 | Indicator screw | ABS (plastic) |
2 | Position indicator | ABS (plastic) |
3 | Spring clip | Stainless steel 304 |
4 | Washer | Stainless steel 304 |
5 | External washer | Engineering plastic |
6 | Adjustment screw | Stainless steel 304 |
7 | Nut | Stainless steel 304 |
8 | Washer | Stainless steel 304 |
9 | Body | Extruded aluminum |
10 | Piston | Aluminum, die cast |
11 | Piston O-ring | NBR |
12 | Bearing group | Engineering plastic |
13 | End cap O-ring | NBR |
14 | End cap | Cast aluminum, polyester coated |
15 | Fixing screw | Stainless steel 304 |
16 | Internal washer | Engineering plastic |
17 | Sealing ring | NBR |
18 | Bearing | Engineering plastic |
19 | Retainer | Alloy steel |
20 | Gear | Alloy steel |
21 | Bearing | Engineering plastic |
22 | Sealing ring | NBR |
Parts and material sketch of the PA-DA-105-1 pneumatic actuator
Technical parameters of pneumatic valve 4V320-08 220V:
Name | meaning |
Type of pneumatic valve | slide valve |
Working pressure, bar | 1.5 ÷ 1.8 |
Supply voltage, V | 220 В |
Total power, Va | 4.5 |
Control | double-sided electromagnetic |
Frequency of operation, cycle/sec | 5 |
Pneumatic valve 4V320-08 220V
Dimensions and dimensions of pneumatic valve 4V320-08 220V:
Pneumatic valve model | 4V320-08 |
A, mm | 71.9 |
B, mm | 45 |
C, mm | 94.4 |
D, mm | 27 |
E, mm | 69 |
F, mm | 40 |
I, mm | 24 |
K, mm | 40 |
L, mm | 188.8 |
M, mm | 69.4 |
N, mm | 50 |
O, mm | 82.4 |
P, mm | 24 |
S, mm | 20 |
T, mm | 6.5 |
U, mm | 2.4 |
V, mm | 4 |
H, mm | 82.4 |
Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V
Technical parameters of limit switch unit APL-210N:
Name | Value |
Model of limit switch unit | APL-210N |
Maximum voltage of limit switch, V | 250 |
Working environment temperature, °С | -40 to +80 |
Service life, years | 10 |
Limit switch unit APL-210N
Dimensions and dimensions of the APL-210N limit switch unit:
Model | Н, mm | L, mm | B, mm | D, mm | D1, mm | M |
APL-210N | 77 | 112 | 88 | 10 | 5 | 20х1.5 |
Sketch of dimensions and dimensions of limit switch unit APL-210N
Main parameters of the AFC2000 air treatment unit:
Operating pressure, bar | 8 |
Maximum pressure, bar | 10 |
Adjustable pressure range, bar | 0,5 ÷ 9 |
Breaking pressure, bar | 15 |
Air connection | 1/4” |
Operating temperature, C | -5 to +60 |
Filter particle size, µm | 40 |
Oil viscosity | ISO VG 32 |
Weight, kg | 0,395 |
Set composition | filter-moisture separator, pressure regulator, lubricator, bracket |
Air treatment unit AFC2000
Especificaciones
Especificaciones
-
País de origen
-
Temperatura máxima permitida
-
Tipo de conexión
-
Tipo de sello
-
Material del disco
-
Anulación manual
-
Interruptores de límite
-
Sensor de retroalimentación
-
Tensión de alimentación
-
Tipo de actuador neumático
Reseñas (0)
Reseñas (0)
Pago y seguridad
Métodos de pago
Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Preguntas frecuentes
Envío
¿A qué países realizan envíos?
¿A qué países realizan envíos?
Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.
¿Cuánto tiempo tardaré en recibir mi pedido?
¿Cuánto tiempo tardaré en recibir mi pedido?
El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).
Devoluciones y reembolsos
¿Cómo devuelvo un producto?
¿Cómo devuelvo un producto?
Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.
¿Cuánto tiempo tardaré en recibir mi reembolso?
¿Cuánto tiempo tardaré en recibir mi reembolso?
Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.