Butterfly valve Elephant WBV3232E-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, BKV APL-410N Ex, BPV AFC2000
Butterfly valve Elephant WBV3232E-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, BKV APL-410N Ex, BPV AFC2000 - DN40 / 16 bar está agotado y se enviará tan pronto como vuelva a estar disponible.
No se ha podido cargar la disponibilidad de recogida
Entrega y envío
Entrega y envío
El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.
Descripción
Descripción
Butterfly valves Elephant WBV3232E-2W-Fb-H are intended for use as shut-off or control valves for flow control in heat supply systems, water supply, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
Pneumatic distributor Elephant 4V320-08 220V is used to change the direction, start, stop the flow of compressed air in the pneumatic system depending on the external control action.
The Elephant APL-410N EX limit switch unit is an electrical device designed to open and close the working circuit and to visualize the positions of the shut-off element of pipeline valves. As a rule, a sealed box contains two mechanical switches rated for up to 250 V, which monitor the position of the actuator rod and signal in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color hemisphere of the visual indicator. If the connected pipeline valve is closed, then only the red part of the hemisphere with the inscription CLOSED is visible; if open, only the yellow part with the inscription OPEN. This visual indicator is clearly visible from afar, which simplifies the inspection of the equipment, and the color difference between the open and closed positions reduces the likelihood of erroneous perception of information. Thanks to the use of the BKV, it becomes possible to transmit information about the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics when faults are detected.
The AFC2000 air preparation unit is designed to clean compressed air from droplet moisture and solid particles, remove condensate, automatically maintain the pressure at a given level, supply lubricant from the tank to the compressed air flow to the pneumatic system elements with a large range of throughput from 500 liters/minute to 10,000 liters/minute. The lubricator (oil sprayer) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic distributors.
Technical parameters of Elephant WBV3232E-2W-Fb-H PN16 butterfly valves, 4V320-08 220V pneumatic distributor, APL-410N EX BKV, AFC2000 BPV:
Name | Meaning |
Nominal pressure PN, bar | 16 |
Working environment temperature, °C | from -20 to 120 |
Application | ventilation and stationary air conditioning, water supply, heat supply |
Connection to the pipeline | interflange |
Shutter type | rotary disc |
Control type | pneumatic drive |
Sketch of Elephant WBV3232E-2W-Fb-H butterfly valves with, pneumatic distributor 4V320-08 220V, BKV APL-410N EX, BPV AFC2000
Dimensions and sizes of Elephant WBV3232E-2W-Fb-H butterfly valves with , pneumatic distributor 4V320-08 220V, BKV APL-410N EX, BPV AFC2000:
DN, mm | L, mm | D, mm | H, mm | F, mm | L1, mm | G, mm | X, mm | Y, mm |
40 | 33 | 71 | 166 | 98 | 153 | 147 | 88 | 162 |
50 | 45 | 73 | 238 | 115 | 174 | 147 | 88 | 162 |
65 | 48 | 85 | 264 | 115 | 174 | 147 | 88 | 162 |
80 | 49 | 100 | 276 | 135 | 216 | 147 | 88 | 162 |
100 | 55 | 131 | 314 | 135 | 216 | 147 | 88 | 162 |
125 | 58 | 155 | 340 | 135 | 216 | 147 | 88 | 162 |
150 | 59 | 184 | 365 | 160 | 279 | 147 | 88 | 162 |
200 | 64 | 234 | 437 | 193 | 308 | 147 | 88 | 162 |
250 | 70 | 288 | 495 | 210 | 405 | 147 | 88 | 162 |
300 | 80 | 340 | 579 | 210 | 405 | 147 | 88 | 162 |
Sketch of parts and materials of butterfly valves Elephant WBV3232E-2W-Fb-H
Table of parts and materials of Elephant WBV3232E-2W-Fb-H butterfly valves:
No. | Name | Material |
1 | Frame | Stainless steel AISI316L (03Х17Н14М3) |
2 | Cuff | EPDM |
3, 4, 5 | Disc, Rod, Stud | Steel AISI316L (03Х17Н14М3) |
6 | Sleeve | PTFE |
7 | Sealing ring | Nitrile NBR |
8 | Plate | Carbon steel |
Technical parameters of the pneumatic distributor Elephant 4V320-08 220V
Name | Meaning |
Type of pneumatic distributor | spool valve |
Model of pneumatic distributor | 4V320-08 220V |
Working pressure, bar | 1.5 ÷ 1.8 |
Supply voltage, V | 220 V |
Response frequency, cycles/sec | 5 |
Limit Switch Block Elephant APL-410N EX
Technical parameters of the limit switch unit Elephant APL-410N EX
Name | Meaning |
Limit switch block model | APL-410N EX |
Service life, years | 10 |
Table of parts and materials of the limit switch block Elephant APL-410N EX:
Item No. | Detail | Material |
1 | Visual indicator | ABS plastic / polycarbonate |
2 | Visual indicator cover | polycarbonate |
3 | Label | |
4 | Cover screws | stainless steel |
5 | BKV housing cover | aluminum die casting |
6 | Shaft | stainless steel |
7 | Limit switches | |
8 | Cams (eccentrics) | polycarbonate |
9 | BKV case | aluminum die casting |
10 | Terminal block | |
11 | Ground terminal | stainless steel |
12 | Hole (thread) for cable entry | |
13 | bracket | stainless steel |
Main parameters of the air preparation unit Elephant AFC2000
Working pressure, bar | 8 |
Maximum pressure, bar | 10 |
Adjustable pressure range, bar | 0.5 ÷ 9 |
Destruction pressure, bar | 15 |
Air connection | 1/4" |
Operating temperature, C | from -5 to +60 |
Size of filtered particles, µm | 40 |
Oil viscosity | ISO VG 32 |
Weight, kg | 0.395 |
Kit composition | filter-moisture separator, pressure regulator, lubricator, bracket |
Especificaciones
Especificaciones
-
País de origen
-
Temperatura máxima permitida
-
Tipo de conexión
-
Tipo de sello
-
Material del disco
-
Interruptores de límite
-
Tipo de actuador neumático
Reseñas (0)
Reseñas (0)
Documentation
Documentation
Pago y seguridad
Métodos de pago
Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Preguntas frecuentes
Envío
¿A qué países realizan envíos?
¿A qué países realizan envíos?
Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.
¿Cuánto tiempo tardaré en recibir mi pedido?
¿Cuánto tiempo tardaré en recibir mi pedido?
El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).
Devoluciones y reembolsos
¿Cómo devuelvo un producto?
¿Cómo devuelvo un producto?
Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.
¿Cuánto tiempo tardaré en recibir mi reembolso?
¿Cuánto tiempo tardaré en recibir mi reembolso?
Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.