Ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, fla – Valve Elephant
Elephant  |  SKU: D160-43403

Ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with Mon/actuator PA-DA, pneumatic positioner YT-1000RSN with feedback and Doubler MON3-700-T38-

€3.215,93
Impuestos incluidos. Los gastos de envío se calcularán al momento de pagar.

Ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with Mon/actuator PA-DA, pneumatic positioner YT-1000RSN with feedback and Doubler MON3-700-T38- - DN100 / 16 bar está agotado y se enviará tan pronto como vuelva a estar disponible.

Entrega y envío

El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.

Si tiene alguna pregunta sobre nuestros productos, opciones de envío o cualquier otra cosa, no dude en comunicarse con nosotros.

Descripción

The ball valve is used as a shut-off valve, as well as for mixing and separating the working medium flows in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the valve materials.

Pneumatic actuators Elephant double-acting rotary PA-DAXXX are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.

Electro-pneumatic rotary positioner is used to control rotary type pneumatic actuators by means of electric controller or control system with analog DC output signal in the range of 4 to 20 mA.

The MONx-x-Tx-ISO manual override with worm gear and reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution for the entire range of manual override tasks.

 

 

Technical parameters of ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with Mon/actuator PA-DA, pneumatic positioner YT-1000RSN with feedback and Doubler MON3-700-T38-ISO

Name Meaning
Nominal pressure PN, bar 16
Working environment temperature, °C from -25 to 180
Type of crane device three-way
Three-way valve type L
Application water supply, heat supply
Working environment water, steam, petroleum products, neutral media, gaseous media
Connection to the pipeline flanged
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining flanged
Control double acting pneumatic actuator
Availability of limit switches No
Availability of pneumatic distributor No
Availability of electropneumatic positioner There is
Average service life, years 10
Warranty, g. 1

 

 

Sketch of overall dimensions and sizes of ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with Mon/actuator PA-DA, pneumatic positioner YT-1000RSN with feedback and Doubler MON3-700-T38-ISO

 

Dimensions and sizes of ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with Mon/actuator PA-DA, pneumatic positioner YT-1000RSN with feedback and Doubler MON3-700-T38-ISO

Size L, mm ØD, mm ØD1, mm ØD2, mm A, mm E, mm S, mm C, mm H1, mm
DN15 150 95 65 45 153 72 62.5 117.5 120
DN20 160 105 75 58 153 72 62.5 117.5 120
DN25 180 115 85 64 153 72 62.5 117.5 120
DN32 200 140 100 78 153 72 62.5 117.5 120
DN40 220 150 110 88 174 89 62.5 117.5 120
DN50 240 165 125 99 174 89 62.5 117.5 120
DN65 260 185 145 122 216 109 62.5 117.5 133
DN80 280 200 160 138 279 134 62.5 117.5 180
DN100 325 220 180 158 279 134 62.5 117.5 180

 

 

Sketch of parts and materials of ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with Mon/actuator PA-DA, pneumatic positioner YT-1000RSN with feedback and Doubler MON3-700-T38-ISO

 

Table of parts and materials of ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with Mon/actuator PA-DA, pneumatic positioner YT-1000RSN with feedback and Doubler MON3-700-T38-ISO

Item No. Part name Material
1 Frame Stainless steel SS316
2 Ball Stainless steel SS316
3 Sealing PTFE
4 Case cover Stainless steel SS316
5 Bolt Stainless steel SS304
6 Pad PTFE
7 screw Stainless steel SS304
8 Pad PTFE
9 Rod seal PTFE
10 Bolt Stainless steel SS304
11 Seal Stainless steel SS304

 

 

Pneumatic drives Elephant

 

Technical parameters of pneumatic drives Elephant

Name Meaning
Design double acting
Control pressure, bar 2 ÷ 8

 

 

Sketch of dimensions and sizes of pneumatic actuators Elephant

 

Dimensions and sizes of pneumatic actuators Elephant:

Drive model DA-052 DA-065 DA-083 DA-105
G, mm 15 15 15 25
Mmm 80 80 80 80
N, mm 30 30 30 30
F0, mm 34 34 34 41
R, mm 20 20 20 20
B1, mm 153 174 216 279
C, mm 30 36 46 55
E, mm 72 89 109 134
J 4-M5x8 4-M6x10 4-M6x10 4-M8x12
TO 4-M6x10 4-M8x12 4-M8x12 4-M10x16
F, mm 26 26 26 26
A1, mm 108 125 152 189
D, mm 41 46 55 64
L, mm 11x11 14x14 17x17 22x22
H F03 F05 F05 F07
I F05 F07 F07 F10

 

 

Table of parts and materials of pneumatic drives Elephant:

No. Name Quantity Material Coating
1 Frame 1 extruded aluminum hard anodized
2 Side plugs 2 cast aluminum
3 Gear 1 stainless steel nickel plated
4 Piston 2 steel/aluminum oxidation/galvanic zinc plating
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel epoxy coating
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clamp 2 stainless steel
15 Indicator 1 plastic
16 Indicator housing 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel oxidation/galvanic zinc plating
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 Sealing ring 2 NBR
23 Sealing ring 2 NBR
24 Bearing 2 stainless steel
25 Adjusting nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Sleeve 2 aluminum

 

 

Electropneumatic rotary positioners Elephant YT-1000RSN without feedback

 


Technical parameters of electropneumatic rotary positioners Elephant YT-1000RSN without feedback

Name Meaning
Model of electropneumatic positioner YT-1000RSN without feedback
Input control signal, mA 4~20
Internal resistance, Ohm 250(±15)
Input pressure, bar 1.4~7
Lever stroke angle 0~90°
Compressed air connection thread 1/4″
Pressure gauge connection thread 1/8″
Cable entry G1/2″
Type of protection IP66
Compressed air consumption, l/min 3
Air flow at outlet, l/min 80
Body material aluminum casting

 

 

Sketch of overall dimensions and sizes of electropneumatic rotary positioners Elephant YT-1000RSN without feedback


 

Dimensions and sizes of electropneumatic rotary positioners Elephant YT-1000RSN without feedback:

Positioner model YT-1000RSI
A, mm 224.3
B, mm 166.5
C, mm 117.5
D, mm 132.3
E, mm 6
F, mm 122
G, mm 45
H, mm 45
I, mm 23
J, mm 27
K, mm 32.5
L, mm 35.5
M, mm 91.8
N, mm 37.2
O, mm 43.5
P, mm 26.5
Q, mm 33
R, mm 80.25
S, mm 62.5
T, mm 8
U1, mm 70
U2, mm 93
V1, mm 40
V2, mm 63
W, mm 26
X, mm 32
Y, mm 9
Z, mm 24

 

 

Manual backups Elephant MON1-250-T26-ISO, MON2-450-T28-ISO, MON3-700-T38-ISO

 

Technical parameters of manual backup valves Elephant MON1-250-T26-ISO, MON2-450-T28-ISO, MON3-700-T38-ISO

Name Meaning
Manual backup model MON1-250-T26-ISO,MON2-450-T28-ISO,MON3-700-T38-ISO
Climate performance U, UHL, T, OM
Installation method horizontal/vertical
Degree of protection, IP 67
Connection type ISO 5211

 

 

Sketch of dimensions and sizes of manual backups Elephant MON1-250-T26-ISO, MON2-450-T28-ISO, MON3-700-T38-ISO

 

Dimensions and sizes of manual backup valves Elephant MON1-250-T26-ISO, MON2-450-T28-ISO, MON3-700-T38-ISO:

Model MON1-250-T26-ISO MON2-450-T28-ISO MON3-700-T38-ISO
b1, mm 14 17 22
N, mm 22 22 28
b2, mm 14 17 22
M, mm 16 18 22
D1, mm Ø50 Ø70 Ø102
4-M1, mm 4-M6 4-M8 4-M10
D2, mm Ø70 Ø102 Ø125
4-M2, mm 4-M8 4-M10 4-M12
E, mm 70x70 95x95 114x114
D3, mm Ø50 Ø70 Ø102
4-Ø1, mm 4-Ø6.5 4-Ø8.5 4-Ø10.5
D4, mm Ø70 Ø102 Ø125
4-Ø2, mm 4-Ø8.5 4-Ø10.5 4-Ø12.5
A, mm 90 125 140
B, mm 55 64 71
ØC, mm Ø88 Ø110 Ø129
F, mm 115 135 166
T, mm 44 62.5 70
Y, mm 145 178 212
H, mm 120 133 180
S, mm 53 56.5 68.7
K, mm 10 13 12.5
Ø steering wheel, mm 180 200 280

 

 

Sketch of parts and materials of manual backups Elephant MON1-250-T26-ISO, MON2-450-T28-ISO, MON3-700-T38-ISO

 


Table of parts and materials of manual backup valves Elephant MON1-250-T26-ISO, MON2-450-T28-ISO, MON3-700-T38-ISO:

Item No. Details Material
1 Rod for mounting pneumatic actuator steel 45
2, 8 Sealing ring EPDM
3 Locking spring spring steel
4 Top end cap aluminum alloy
5 Screw steel 304
6 Fixing bracket (main rod) steel 304
7 Frame aluminum alloy
9 Reducer cast iron VCh50
10 Transition coupling cast iron VCh40
11 Gearbox rod cast iron VCh40

Especificaciones
  • País de origen
    China
  • Apertura de puerto
    full bore
  • Temperatura máxima permitida
    180 °C
  • Tipo de conexión
    Flanged
  • Entorno operativo
    water, steam, petroleum products, neutral media, gaseous media
  • Tipo de sello
    PTFE
  • Interruptores de límite
    no
  • Tipo de actuador neumático
    double action

Reseñas (0)

Documentation

Pago y seguridad

Métodos de pago

    Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

    Variantes disponibles

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-43403DN10016 bar €3.215,93 0 in stock
    D160-42187DN1516 bar €834,08 0 in stock
    D160-42339DN2016 bar €868,45 0 in stock
    D160-42491DN2516 bar €943,21 0 in stock
    D160-42643DN3216 bar €1.040,22 0 in stock
    D160-42795DN4016 bar €1.148,57 0 in stock
    D160-42947DN5016 bar €1.300,17 0 in stock
    D160-43099DN6516 bar €1.776,19 0 in stock
    D160-43251DN8016 bar €2.308,76 0 in stock

    Preguntas frecuentes

    Envío

    ¿A qué países realizan envíos?

    Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.

    ¿Cuánto tiempo tardaré en recibir mi pedido?

    El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).

    Devoluciones y reembolsos

    ¿Cómo devuelvo un producto?

    Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.

    ¿Cuánto tiempo tardaré en recibir mi reembolso?

    Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.