Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H threaded, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic actuator Elephant PA-DA 052-105 pneumatic distributor 4V320-08 connection DN8 BKV APL-510N-EX
Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H threaded, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic actuator Elephant PA-DA 052-105 pneumatic distributor 4V320-08 connection DN8 BKV APL-510N-EX - DN10 / 63 bar está agotado y se enviará tan pronto como vuelva a estar disponible.
No se ha podido cargar la disponibilidad de recogida
Entrega y envío
Entrega y envío
El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.
Descripción
Descripción
The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.
Pneumatic actuators PA-DA are designed to automate the process of controlling industrial shut-off valves - valves, ball valves. Pneumatic actuators Elephant are designed for use both indoors and outdoors. All internal and external parts have an anti-corrosion coating.
Pneumatic distributors 4V320-08 220 V are used for control in pneumatic systems with a NAMUR mating surface for installing distributors through through holes in the housing.
The Elephant APL-510N-EX limit switch unit is an electrical device designed to open and close the working circuit and to visualize the positions of the shut-off element of pipeline valves. As a rule, a sealed box contains two mechanical switches rated for up to 250 V, which monitor the position of the actuator rod and signal in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color hemisphere of the visual indicator. If the connected pipeline valve is closed, then only the red part of the hemisphere with the inscription CLOSED is visible; if open, only the yellow part with the inscription OPEN. This visual indicator is clearly visible from afar, which simplifies the inspection of the equipment, and the color difference between the open and closed positions reduces the likelihood of erroneous perception of information. Thanks to the use of the BKV, it becomes possible to transmit information about the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics when faults are detected.
Technical data of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H PA-DA 4V320-08 220V APL-510N Ex
| Nominal diameter DN, mm | 25-32 |
| Working pressure PN, bar | 16 |
| Temperature of working environment t, ⁰C | from -20 to +120 |
| Working environment | cold and hot water, air without impurities of oil and fat, other media neutral to the material |
| Direction of flow | bilateral |
| Body material | aluminum alloy |
| Control type | manual (handle) |
| Addition | installation of electric or pneumatic drive is possible (ISO 5211-2001) |
Sketch of details of ball cranes Elephant BV3232P(2pc)-FP-T-ISO-H PA-DA 4V320-08 220V APL-510N Ex
Materials of parts of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H PA-DA 4V320-08 220V APL-510N Ex
| No. | Detail | Material |
| 1.6 | Frame | Stainless steel SS316 |
| 2.4 | Ball seal | PTFE |
| 3 | Ball | Stainless steel SS316 |
| 5 | Sealing ring | PTFE |
| 7 | Stock | Stainless steel SS316 |
| 8 | Rod seal | VITON |
| 9 | Stem nut | Stainless steel SS316 |
Sketch of ball cranes Elephant BV3232P(2pc)-FP-T-ISO-H PA-DA 4V320-08 220V APL-510N Ex
Overall and installation dimensions of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H PA-DA 4V320-08 220V APL-510N Ex
| DN | D | L | H2 | L1 | H |
| 10 | 10 | 63 | 34 | 153 | 98 |
| 15 | 15 | 58 | 37 | 153 | 98 |
| 20 | 20 | 66 | 40 | 153 | 98 |
| 25 | 24 | 72 | 54 | 153 | 98 |
| 32 | 32 | 83 | 60 | 153 | 98 |
| 40 | 38 | 95 | 70 | 216 | 135 |
| 50 | 49 | 110 | 68 | 216 | 135 |
| 65 | 64 | 147 | 94.5 | 216 | 135 |
| 80 | 76 | 169 | 103.5 | 279 | 160 |
| 100 | 98 | 204 | 122 | 279 | 160 |
Technical characteristics of PA-DA pneumatic actuators
| Design | Double action |
| Nominal pressure PN, bar | 12 |
| Working pressure, bar | 2…8 |
| Working environment | Filtered compressed air or non-aggressive gases, oils |
| Maximum particle diameter | less than 30 µm2 |
| Operating temperature t, ⁰C | • from –20 to +80 • from –40 to +80 (low-temperature version) • from –20 to +160 (with dry air) |
| Adjustment range | ±5° for rotation at 0° and 90° |
| Manual duplication | There is |
| Position indicator | open/closed |
| Operating environment | indoors and outdoors. (All internal and external parts have anti-corrosion coating) |
PA-DA pneumatic actuator materials sketch
PA-DA pneumatic actuator parts materials
| No. | Name | Material |
| 1 | Frame | extruded aluminum |
| 2 | Side plugs | cast aluminum |
| 3 | Gear | stainless steel |
| 4 | Piston | steel/aluminum |
| 5 | Plugs | stainless steel |
| 6 | Piston ring | NBR |
| 7 | Springs | spring steel |
| 8 | Piston bearing | engineering plastic |
| 9 | Piston ring | NBR |
| 10 | Plug | NBR |
| 11 | Thrust ring | engineering plastic |
| 12 | Ring | engineering plastic |
| 13 | Washer | stainless steel |
| 14 | Spring clamp | stainless steel |
| 15 | Indicator | plastic |
| 16 | Indicator housing | plastic |
| 17 | Bearing | engineering plastic |
| 18 | Cam | steel |
| 19 | Bearing | NBR |
| 20 | Bearing | engineering plastic |
| 21 | Bearing | engineering plastic |
| 22 | Sealing ring | NBR |
| 23 | Sealing ring | NBR |
| 24 | Bearing | stainless steel |
| 25 | Adjusting nut | stainless steel |
| 26 | Adjustment screw | stainless steel |
| 27 | Sleeve | aluminum |
Technical characteristics of the pneumatic distributor 4V320-08 220 V
| Name | Meaning |
| Type of pneumatic distributor | spool valve |
| Body material | aluminum alloy and technopolymer |
| Management | two-way electromagnetic |
| Scheme of work |
5/2 5 working lines; 2 positions |
| Effective cross-sectional area, mm2 |
model 4V320-8 – 25 (Cv = 1.4) model 4V320-10 – 30 (Cv = 1.68) |
| Thread of working ports |
model 4V320-8 – G 1/4" model 4V320-10 – G 3/8" |
| Exhaust port thread |
model 4V320-8 – G 1/4" model 4V320-10 – G 1/4" |
| Working pressure, bar | 1,5 ÷ 1,8 |
| Maximum pressure, bar | 12 |
| Working environment |
purified air (filtration fineness 40 microns) |
| Supply voltage, V | 220 |
| Full power, VA | 4,5 |
|
Permissible changes in supply voltage |
±10% |
| Degree of protection/insulation class | IP65/F |
| Operating temperature, °C | from -5 to +50 |
| Maximum response frequency | 5 cycles per second |
| Minimum switching time, s | 0,05 |
| Flow rate, l/min |
model 4V320-8 – 1,350 model 4V320-10 – 2,250 |
| Average resource, cycles | 20 000 000 |
| Weight, kg | 1,2 |
Characteristics of the APL-510N-EX limit switch unit
| Parameter | Meaning |
| Frame |
Weatherproof IP67/ NEMA4 4X,7,9 Explosion Proof E EX d IIC T6 |
| Compatible devices |
- quarter-turn pneumatic actuators; - any actuators with a shaft rotation of 90° |
| Full rotation angle | 90° |
| Cable entries | 2 x NPT 3/4” |
| Electrical connection | screw clamp terminals 8 points (0.08 – 2.5) mm2 |
| Cable entry thread | 2 x NPT 3/4” |
| Visual indicator type | two-color hemisphere: OPEN - yellow CLOSED - red |
| Switches/sensors | two mechanical switches two proximity sensors |
| Nominal voltage, V | 250 |
| Nominal current, A | 16 |
| Permissible ambient temperature, °C | from -20 to +66 |
| Average resource, cycles | 10,000,000 |
| Weight, kg | 1.8 |
Especificaciones
Especificaciones
-
País de origen
-
Apertura de puerto
-
Temperatura máxima permitida
-
Tipo de conexión
-
Entorno operativo
-
Tipo de sello
-
Interruptores de límite
-
Tipo de actuador neumático
Reseñas (0)
Reseñas (0)
Documentation
Documentation
Pago y seguridad
Métodos de pago
Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Preguntas frecuentes
Envío
¿A qué países realizan envíos?
¿A qué países realizan envíos?
Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.
¿Cuánto tiempo tardaré en recibir mi pedido?
¿Cuánto tiempo tardaré en recibir mi pedido?
El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).
Devoluciones y reembolsos
¿Cómo devuelvo un producto?
¿Cómo devuelvo un producto?
Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.
¿Cuánto tiempo tardaré en recibir mi reembolso?
¿Cuánto tiempo tardaré en recibir mi reembolso?
Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.
