Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN80-100 16 bar, full bore coupling, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4M310-08 24V , with BKV APL-510N EX

Ball valves are used as shut-off valves in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve. The use of ball valves as regulating valves is not allowed.
Pneumatic rotary actuator is designed to automate the process of control of industrial valves, as well as to determine the position of the valve shut-off body.
Pneumatic control valves are used for control in pneumatic systems with NAMUR docking surface, to install the valves through holes in the housing. Electromagnetic control, is realized by means of voltage coils 12-AC, 12-DC, 24-AC, 24-DC, 110-AC, 220-AC. Depending on the model, the valves have one-way or two-way control. Solenoid operated pneumatic valves have a wide range of models and include common switching types for three (3/2) and five (5/2 and 5/3) line pneumatic valves. They are designed for use with quarter-turn pneumatic actuators.
Limit switch unit is an electrotechnical device designed to open and close the working circuit and to visualize the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.

Technical parameters of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN80-100 16 bar, full bore coupling, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4M310-08 24V , with BKV APL-510N EX:

Dimensions and sizes of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN80-100 16 bar, full bore coupling, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4M310-08 24V , with BKV APL-510N EX:

Table of parts and materials of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN80-100 16 bar, full bore coupling, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4M310-08 24V , with BKV APL-510N EX:

Technical parameters of pneumatic actuators Elephant PA-DA-105-1

Dimensions and sizes of pneumatic actuators Elephant PA-DA-105-1

Table of parts and materials for pneumatic actuators Elephant PA-DA-105-1

Technical parameters of pneumatic valve Elephant 4M310-08

Dimensions and sizes of the pneumatic valve Elephant 4M310-08

Technical parameters of limit switch units Elephant APL-510N EX