Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN10-50 16 bar, full bore – Valve Elephant
Elephant  |  SKU: D160-46763

Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN10-50 16 bar, full bore coupling, stainless steel SS316, PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-08 220V, with BKV APL-210N , with manual Doubler MON1-250-T26-ISO,

€369,00
Impuestos incluidos. Los gastos de envío se calcularán al momento de pagar.

Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN10-50 16 bar, full bore coupling, stainless steel SS316, PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-08 220V, with BKV APL-210N , with manual Doubler MON1-250-T26-ISO, - DN10 / 63 bar está agotado y se enviará tan pronto como vuelva a estar disponible.

Entrega y envío

El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.

Si tiene alguna pregunta sobre nuestros productos, opciones de envío o cualquier otra cosa, no dude en comunicarse con nosotros.

Descripción

The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the valve materials. The use of ball valves as control valves is not allowed.

Elephant double-acting rotary pneumatic actuators PA-DAXXX and PA-SA-XXX rotary pneumatic actuators with return spring are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.

The pneumatic distributor is used to change the direction, start, and stop the flow of compressed air in a pneumatic system depending on the external control action.

The manual override with worm gear and HDM reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution for the entire range of manual override tasks.

The limit switch unit is designed for visual and electrical signaling of the end positions of the shut-off element of the valve: valve, tap or butterfly valve. It is installed on top of the surface of the pneumatic drive and connected to the DIN standard drive shaft. In a sealed box, as a rule, there are two sensors that monitor the position of the drive shaft and signal in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. Visual indication of the position can be seen on the body of the unit there is a 3D visual indicator RED - CLOSED and GREEN - OPEN.

The air preparation unit is designed to clean compressed air from droplet moisture and solid particles, remove condensate, automatically maintain pressure at a given level, and supply lubricant from the reservoir to the compressed air flow to the elements of the pneumatic system.

 

 

Technical parameters of the Elephant BV3232P(2pc)-FP-T-ISO-H ball valves DN10-50 PN63, full bore coupling, stainless steel SS316, PTFE, with double-acting PA-DA pneumatic actuator, with 4V320-08 220V pneumatic distributor, with APL-210N BKV, with MON1-250-T26-ISO manual override, with AF BPV:

Name Meaning
Working pressure, bar 63
Working environment temperature, °C from -20 to 230
Application heat supply
Working environment water, air, steam, slightly aggressive environment, oils, industrial water, water-glycol solutions, petroleum products
Connection to the pipeline coupling (threaded)
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining Internal thread
Control double acting pneumatic actuator
Availability of limit switches There is
Availability of pneumatic distributor There is

 

 

Sketch Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN10-50 PN63, full bore coupling, stainless steel SS316, PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with manual override MON1-250-T26-ISO, with BPV AF

 

 

Dimensions and sizes of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN10-50 PN63, full bore coupling, stainless steel SS316, PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with manual override MON1-250-T26-ISO, with BPV AF:

Size D, mm L, mm B1, mm E, mm C, mm H, mm X, mm Y, mm H2, mm
DN10 10 63 153 72 120 77 162 139 34
DN15 15 58 153 72 120 77 162 139 37
DN20 20 66 153 72 120 77 162 139 40
DN25 25 72 153 72 120 77 162 139 54
DN32 32 83 153 72 120 77 162 139 60
DN40 40 95 174 89 120 77 162 139 70
DN50 50 95 174 89 120 77 162 139 70

 

 

Sketch of parts and materials Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN10-50 PN63, full bore coupling, stainless steel SS316, PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with manual override MON1-250-T26-ISO, with BPV AF

 

Table of parts and materials Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN10-50 PN63, full bore coupling, stainless steel SS316, PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with manual override MON1-250-T26-ISO, with BPV AF:

Item No. Details Materials
1.6 Frame steel 316
2.4 Ball seal polytetrafluoroethylene PTFE
3 Ball steel 316
5 Sealing ring polytetrafluoroethylene PTFE
7 Stock steel 316
8 Rod seal VITON
9 Stem nut steel 316

 

 

Technical parameters of the pneumatic drive Elephant

Name Meaning
Design double acting
Working pressure, bar 6
Working environment filtered compressed air or non-aggressive gases, oils
Availability of manual backup steering wheel

 

 

Sketch of the dimensions and sizes of the pneumatic drive Elephant

 

Dimensions and sizes of the pneumatic drive Elephant:

Drive model DA-052 DA-065
G, mm 15 15
Mmm 80 80
N, mm 30 30
F0, mm 34 34
R, mm 20 20
B1, mm 153 174
C, mm 30 36
E, mm 72 89
J 4-M5x8 4-M6x10
TO 4-M6x10 4-M8x12
F, mm 26 26
A1, mm 108 125
D, mm 41 46
L 11x11 14x14
H F03 F05
I F05 F07

 

 

Sketch of parts and materials of pneumatic drive Elephant

 

 

Table of parts and materials of pneumatic drive Elephant:

No. Name Quantity Material Coating
1 Frame 1 extruded aluminum hard anodized
2 Side plugs 2 cast aluminum
3 Gear 1 stainless steel nickel plated
4 Piston 2 steel/aluminum oxidation/galvanic zinc plating
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel epoxy coating
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clamp 2 stainless steel
15 Indicator 1 plastic
16 Indicator housing 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel oxidation/galvanic zinc plating
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 Sealing ring 2 NBR
23 Sealing ring 2 NBR
24 Bearing 2 stainless steel
25 Adjusting nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Sleeve 2 aluminum

 

 

Pneumatic distributor Elephant

 

Technical parameters of the pneumatic distributor Elephant

Name Meaning
Type of pneumatic distributor spool valve
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220 V
Full power, Va 4.5
Control two-way electromagnetic
Response frequency, cycles/sec 5

 

 

Sketch of the dimensions and sizes of the pneumatic distributor Elephant

Dimensions and sizes of the pneumatic distributor Elephant:

Model of pneumatic distributor 4V320-08
A, mm 71.9
B, mm 45
C, mm 94.4
D, mm 27
E, mm 69
F, mm 40
I, mm 24
K, mm 40
L, mm 188.8
M, mm 69.4
N, mm 50
O, mm 82.4
P, mm 24
S, mm 20
T, mm 6.5
U, mm 2.4
V, mm 4
H, mm 82.4

 

 

Manual backup Elephant

Technical parameters of the manual backup Elephant

Name Meaning
Climate performance U, UHL, T, OM
Installation method horizontal/vertical
Degree of protection, IP 67
Connection type ISO 5211

 

 

Sketch of dimensions and sizes of manual backup Elephant

 

Dimensions and sizes of the manual backup Elephant:

Manual backup model HDM-1
b1, mm 14
N, mm 22
b2, mm 14
M, mm 16
D1, mm 50
D2, mm 70
D3, mm 50
D4, mm 70
ØC, mm 88
C, mm 120
A, mm 90
F, mm 115
Y, mm 145
4-M1 4-M6
4-M2 4-M8
4-Ø1 4-Ø6.5
4-Ø2 4-Ø8.5
E, mm 70x70
B, mm 55
S, mm 53
K, mm 10
T, mm 145

 

 

Sketch of parts and materials of manual backup Elephant

 

Table of parts and materials of the manual backup Elephant:

Item No. Details Material
1 Rod for mounting a pneumatic actuator steel 45
2, 8 Sealing ring EPDM
3 Locking spring spring steel
4 Top end cap aluminum alloy
5 Screw steel 304
6 Fixing bracket (main rod) steel 304
7 Frame aluminum alloy
9 Reducer cast iron VCh50
10 Transition coupling cast iron VCh40
11 Gearbox rod cast iron VCh40

 

 

Limit Switch Block Elephant

 

Technical parameters of the limit switch block Elephant

Name Meaning
Maximum limit switch voltage, V 250
Enclosure protection rating, IP 65
Working environment temperature, °C from -40 to +80
Service life, years 10

 

 

Sketch of the dimensions and sizes of the limit switch block Elephant

 

 

Dimensions and sizes of the Elephantu limit switch block:

Model H, mm L, mm B, mm D, mm D1, mm M
APL-210N 77 112 88 10 5 20x1.5

 

 

Air preparation unit Elephant AFC2000

 

Technical parameters of the air preparation unit Elephant AFC2000

Name Meaning
Working pressure, bar 8
Adjustable pressure range, bar 0.5 ÷ 9
Size of filtered particles, µm 40 microns
Weight, kg 0.395

 

 

Sketch of the dimensions and sizes of the air preparation unit Elephant AFC2000

 

Dimensions and sizes of the air preparation unit Elephant AFC2000:

Model BPV AFC2000
A, mm 162
B, mm 88
C, mm 139
D, mm 31
E, mm 53.5
F, mm 12
G, mm 8
H, mm 7
I, mm 13.3
J, mm 39
K, mm 5
L, mm 40
M, mm 32
N, mm 53
O, mm 29
P, mm 6
R, mm 41.5

 

 

Passports and certificates

Data sheet for Elephant DA/SA-xxx double-acting pneumatic actuator with return springs

 

 

Passports and certificates

Data sheet for Elephant DA/SA-xxx double-acting pneumatic actuator with return springs

Especificaciones
  • País de origen
    China
  • Apertura de puerto
    full bore
  • Temperatura máxima permitida
    230 °C
  • Tipo de conexión
    Threaded
  • Entorno operativo
    water, air, steam, mildly aggressive media, oils, industrial water, water-glycol solutions, petroleum products
  • Tipo de sello
    PTFE
  • Interruptores de límite
    have
  • Tipo de actuador neumático
    double action

Reseñas (0)

Documentation

Pago y seguridad

Métodos de pago

    Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

    Variantes disponibles

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-46763DN1063 bar €369,00 0 in stock
    D160-46771DN10040 bar €925,00 0 in stock
    D160-46764DN1563 bar €365,00 0 in stock
    D160-46765DN2063 bar €374,00 0 in stock
    D160-46766DN2563 bar €340,00 0 in stock
    D160-46767DN3263 bar €352,00 0 in stock
    D160-46772DN4063 bar €362,00 0 in stock
    D160-46768DN5063 bar €393,00 0 in stock
    D160-46769DN6540 bar €544,00 0 in stock

    Preguntas frecuentes

    Envío

    ¿A qué países realizan envíos?

    Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.

    ¿Cuánto tiempo tardaré en recibir mi pedido?

    El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).

    Devoluciones y reembolsos

    ¿Cómo devuelvo un producto?

    Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.

    ¿Cuánto tiempo tardaré en recibir mi reembolso?

    Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.