Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 full bore, – Valve Elephant
Elephant  |  SKU: D160-52444

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 full bore, body - stainless steel 316, welded, with pneumatic actuator Elephant PA-DA and limit switch block APL-410N EX

€207,95
Impuestos incluidos. Los gastos de envío se calcularán al momento de pagar.

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 full bore, body - stainless steel 316, welded, with pneumatic actuator Elephant PA-DA and limit switch block APL-410N EX - DN10 / 63 bar está agotado y se enviará tan pronto como vuelva a estar disponible.

Entrega y envío

El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.

Si tiene alguna pregunta sobre nuestros productos, opciones de envío o cualquier otra cosa, no dude en comunicarse con nosotros.

Descripción

The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.

Pneumatic actuators Elephant double-acting rotary PA-DA-XXX are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.

The limit switch unit is an electrical device designed to open and close the working circuit and to visualize the positions of the shut-off element of the pipeline valve. As a rule, a sealed box contains two mechanical switches rated for voltage up to 250 V, which monitor the position of the actuator rod and signal in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color hemisphere of the visual indicator. If the connected pipeline valve is closed, then only the red part of the hemisphere with the inscription CLOSED is visible; if open, only the yellow part with the inscription OPEN. This visual indicator is clearly visible from afar, which simplifies the inspection of the equipment, and the color difference between the open and closed positions reduces the likelihood of erroneous perception of information. Thanks to the use of the limit switch unit, it becomes possible to transmit information about the position of the pipeline valve (open / closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics when faults are detected.

 

Technical parameters of Elephant BV3232P(3pc)-FP-W-ISO-H LONG ball valves DN10-150 PN16-63 full bore, body - stainless steel 316, for welding, with Elephant PA-DA pneumatic actuator and APL-410N EX limit switch unit:

Name Meaning
Working environment temperature, °C from -20 to 180
Type of crane device two-way
Application water supply, heat supply, industry
Working environment water, steam, petroleum products, neutral media, gaseous media
Connection to the pipeline for welding
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining for welding
Control double acting pneumatic actuator
Availability of limit switches There is
Availability of pneumatic distributor No
Availability of electropneumatic positioner No
Average service life, years 5
Warranty, g. 1

 

 

Sketch of the dimensions and sizes of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 РN16-63 full bore, body - stainless steel 316, for welding, with pneumatic actuator Elephant PA-DA and limit switch block APL-410N EX


Dimensions and sizes of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 РN16-63 full bore, body - stainless steel 316, for welding, with pneumatic actuator Elephant PA-DA and limit switch block APL-410N EX:

Model L, mm A, mm E, mm
DN10 130 153 72
DN15 150 153 72
DN20 155 174 89
DN25 186 216 109
DN32 195 153 72
DN40 231 174 89
DN50 243 216 109
DN65 290 216 109
DN80 302 216 109
DN100 326 279 134
DN125 360 308 157
DN150 390 405 174

 

 

Sketch of parts and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 РN16-63 full bore, body - stainless steel 316, for welding, with pneumatic actuator Elephant PA-DA and limit switch block APL-410N EX

 


Table of parts and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 РN16-63 full bore, body - stainless steel 316, for welding, with pneumatic actuator Elephantu PA-DA and limit switch block APL-410N EX:

Item No. Part name Material
1 Frame stainless steel 316
2 Side element (2 pcs) stainless steel 316
3 Ball stainless steel 316
4 Ball seal PTFE
5 Rod seal PTFE
6 Sleeve stainless steel 304
7 Stock stainless steel 316
8 Washer stainless steel
9 screw steel A2-70
10 Bolt steel A2-70

 

 

Pneumatic drive Elephant

 


Technical parameters of the pneumatic drive Elephant

Name Meaning
Design double acting
Control pressure, bar 2 ÷ 8

 

 

Sketch of the dimensions and sizes of the pneumatic drive Elephant

 

Dimensions and sizes of the pneumatic drive Elephant:

Model PA-DA-52 PA-DA-65 PA-DA-83 PA-DA-105 PA-DA-130 PA-DA-140
A1, mm 108 125 152 189 210 268
B1, mm 153 174 216 279 308 405
C, mm 30 36 46 55 67.5 76
D, mm 41 46 55 64 70 77
E, mm 72 89 109 134 157 174
F, mm 26 26 26 26 36 36
G, mm 15 15 15 25 25 30
H, mm F03 F05 F05 F07 F07 F10
I, mm F05 F07 F07 F10 F10 F12
J, mm 4-M5x8 4-M6x10 4-M6x10 4-M8x12 4-M8x12 4-M10x16
K, mm 4-M6x10 4-M8x12 4-M8x12 4-M10x16 4-M10x16 4-M12x20
L, mm 11x11 14x14 17x17 22x22 22x22 27x27
Mmm 80 80 80 80 80 130
N, mm 30 30 30 30 30 30
F0, mm 34 34 34 41 62 62
R, mm 20 20 20 20 30 30

 

 

Table of parts and materials of pneumatic drive Elephant:

No. Name Quantity Material Coating
1 Frame 1 extruded aluminum hard anodized
2 Side plugs 2 cast aluminum
3 Gear 1 stainless steel nickel plated
4 Piston 2 steel/aluminum oxidation/galvanic zinc plating
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel epoxy coating
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clamp 2 stainless steel
15 Indicator 1 plastic
16 Indicator housing 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel oxidation/galvanic zinc plating
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 Sealing ring 2 NBR
23 Sealing ring 2 NBR
24 Bearing 2 stainless steel
25 Adjusting nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Sleeve 2 aluminum

 

 

 

Limit Switch Block Elephant APL-410N EX

 

Technical parameters of the limit switch unit Elephant APL-410N EX

Name Meaning
Limit switch block model APL-410N EX
Ambient temperature, °C from -25 to 80
Service life, years 10

 

 

Sketch of the dimensions and sizes of the limit switch block Elephant APL-410N EX

 

 

Dimensions and sizes of the limit switch unit Elephant APL-410N EX:

Model APL-410N EX
A, mm 177
B, mm 174
C, mm 178
D, mm 101
E, mm 76
F, mm 57
G, mm 55
H, mm 23
I, mm 27
J, mm 3
K, mm 4
Ød1, mm Ø5
Ød2, mm Ø9.5

 


Sketch of parts and materials of the limit switch block Elephant APL-410N EX

 

Table of parts and materials of the limit switch block Elephant APL-410N EX:

Item No. Detail Material
1 Visual indicator ABS plastic / polycarbonate
2 Visual indicator cover polycarbonate
3 Label
4 Cover screws stainless steel
5 BKV housing cover aluminum die casting
6 Shaft stainless steel
7 Limit switches
8 Cams (eccentrics) polycarbonate
9 BKV case aluminum die casting
10 Terminal block
11 Ground terminal stainless steel
12 Hole (thread) for cable entry
13 bracket stainless steel

 

 

 

Passports and certificates

Data sheet for Elephant DA/SA-xxx double-acting pneumatic actuator with return springs

 

 

Passports and certificates

Data sheet for Elephant DA/SA-xxx double-acting pneumatic actuator with return springs

Data sheet for limit switch unit Elephant APL-410N EX

 

 

 

Passports and certificates

Data sheet for Elephant DA/SA-xxx double-acting pneumatic actuator with return springs

Data sheet for limit switch unit Elephant APL-410N EX

 

Especificaciones
  • País de origen
    China
  • Apertura de puerto
    full bore
  • Temperatura máxima permitida
    180 °C
  • Tipo de conexión
    For welding
  • Entorno operativo
    water, steam, petroleum products, neutral media, gaseous media
  • Tipo de sello
    PTFE
  • Interruptores de límite
    have
  • Tipo de actuador neumático
    double action

Reseñas (0)

Documentation
nullData sheet for limit switch unit Elephant APL-410N EX

Pago y seguridad

Métodos de pago

    Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

    Variantes disponibles

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-52444DN1063 bar €207,95 0 in stock
    D160-52445DN10025 bar €1.111,16 0 in stock
    D160-52446DN12516 bar €2.088,74 0 in stock
    D160-52447DN1563 bar €207,95 0 in stock
    D160-52448DN15016 bar €3.017,65 0 in stock
    D160-52449DN2063 bar €267,19 0 in stock
    D160-52450DN2563 bar €273,03 0 in stock
    D160-52451DN3263 bar €275,60 0 in stock
    D160-52452DN4040 bar €330,06 0 in stock
    D160-52453DN5040 bar €407,56 0 in stock
    D160-52454DN6525 bar €591,14 0 in stock
    D160-52455DN8025 bar €746,68 0 in stock

    Preguntas frecuentes

    Envío

    ¿A qué países realizan envíos?

    Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.

    ¿Cuánto tiempo tardaré en recibir mi pedido?

    El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).

    Devoluciones y reembolsos

    ¿Cómo devuelvo un producto?

    Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.

    ¿Cuánto tiempo tardaré en recibir mi reembolso?

    Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.