Ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG, body material - Sta – Valve Elephant
Elephant  |  SKU: D160-57290

Ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG, body material - Stainless steel AISI 304, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA-105-1, 4V320-10 220V, BKV APL-410N Ex, BPV AFC2000

€769,18
Tax included Shipping calculated at checkout.

Delivery and Shipping

The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.

If you have any questions about our products, delivery options, or anything else, feel free to reach out.

Description

Ball valve Elephant BV3131P(3pc)-FP-W-ISO-H LONG is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of BV3131P(3pc)-FP-W-ISO-H LONG series valves is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) that are not aggressive to valve materials.

Pneumatic actuator Elephant PA-DA-105-1 of double action is designed for automation of control process of industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.

Pneumatic valve Elephant 4V320-10 220V is used to change direction, start, stop compressed air flows in pneumatic system depending on external control action.

The Elephant APL-410N EX limit switch box is an electrical device designed to open and close the working circuit and to visualise the positions of the shut-off valve body. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalise extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-coloured visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labelled CLOSED is visible; if it is open, only the yellow part labelled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the colour difference between open and closed position reduces the probability of misinterpretation of information. Thanks to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.

The AFC2000 air treatment unit is designed to clean compressed air from moisture and solid particles, remove condensate, automatically maintain pressure at a preset level, and supply lubricant from a reservoir in the compressed air stream to pneumatic system components with a large capacity range from 500 litres/minute to 10,000 litres/minute. The lubricator (oil atomiser) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic valves.

 

 

Technical parameters of ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG with double-acting pneumatic actuator PA-DA-105-1, pneumatic valve 4V320-10 220V, BCV APL-410N EX, BCV AFC2000:

Name Meaning
Working environment temperature, °C from -20 to 180
Type of crane device two-way
Application water supply, heat supply, industry
Working environment water, steam, petroleum products, neutral media, gaseous media
Connection to the pipeline for welding
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining for welding
Control double acting pneumatic actuator
Availability of limit switches There is
Availability of pneumatic distributor There is

 

 

Sketch of ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG with double-acting pneumatic actuator PA-DA-105-1, pneumatic valve 4V320-10 220V, ball valve APL-410N EX, ball valve AFC2000

 

 

Dimensions and dimensions of ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG c pneumatic actuator PA-DA-105-1 double-acting, pneumatic valve 4V320-10 220V, BCV APL-410N EX, BPV AFC2000:

DN, mm L, mm D, mm F, mm L1, mm G, mm X, mm Y, mm
80 302 88.9 153 495 147 88 162
100 326 114.3 153 495 147 88 162

 

 

Detail and material sketch of ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG

 

Table of parts and materials for ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG:

Item No. Part name Material
1 Frame stainless steel 304
2 Side element (2 pcs) stainless steel 304
3 Ball stainless steel 304
4 Ball seal PTFE
5 Rod seal PTFE
6 Sleeve stainless steel 304
7 Stock stainless steel 304
8 Washer stainless steel
9 screw steel A2-70
10 Bolt steel A2-70

 

 

Elephant PA-DA-105-1 double-acting pneumatic actuator

 

Technical parameters of the PA-DA-105-1 double-acting pneumatic actuator:

Name Meaning
Model PA-DA-105-1
Design double acting
Control pressure, bar 2 ÷ 8

 

 

Sketch of parts and materials of Elephant PA-DA-105-1 double-acting pneumatic actuator

 

 

Parts and materials table for double-acting pneumatic actuator Elephant PA-DA-105-1:

No. Part name Material
1 Indicator screw ABS (plastic)
2 Position indicator ABS (plastic)
3 Spring clamp Stainless steel 304
4 Washer Stainless steel 304
5 Outer washer Engineering plastic
6 Adjusting screw Stainless steel 304
7 screw Stainless steel 304
8 Washer Stainless steel 304
9 Frame Extruded aluminum
10 Piston Aluminum, die casting
11 Piston sealing ring NBR
12 Bearing group Engineering plastic
13 End Cap O-Ring NBR
14 End cap Cast aluminum coated with polyester paint
15 Fastening screw Stainless steel 304
16 Internal washer Engineering plastic
17 Sealing ring NBR
18 Bearing Engineering plastic
19 Fixator Alloy steel
20 Gear Alloy steel
21 Bearing Engineering plastic
22 Sealing ring NBR

 

 

Technical parameters of the Elephant 4V320-10 220V pneumatic valve

Name Meaning
Type of pneumatic distributor spool valve
Model of pneumatic distributor 4V320-10 220V
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220 V
Response frequency, cycles/sec 5

 

 

Limit switch unit Elephant APL-410N EX

 

 

Technical parameters of limit switch unit Elephant APL-410N EX

Name Meaning
Limit switch block model APL-410N EX
Service life, years 10

 

 

Parts and materials table for limit switch unit Elephant APL-410N EX:

Item No. Detail Material
1 Visual indicator ABS plastic / polycarbonate
2 Visual indicator cover polycarbonate
3 Label
4 Cover screws stainless steel
5 BKV housing cover aluminum die casting
6 Shaft stainless steel
7 Limit switches
8 Cams (eccentrics) polycarbonate
9 BKV case aluminum die casting
10 Terminal block
11 Ground terminal stainless steel
12 Hole (thread) for cable entry
13 bracket stainless steel

 

 

Main parameters of the Elephant AFC2000 air treatment unit

Working pressure, bar 8
Maximum pressure, bar 10
Adjustable pressure range, bar 0.5 ÷ 9
Destruction pressure, bar 15
Air connection 1/4"
Operating temperature, C from -5 to +60
Size of filtered particles, µm 40
Oil viscosity ISO VG 32
Weight, kg 0.395
Kit composition filter-moisture separator, pressure regulator, lubricator, bracket

Specifications

  • Country of origin
    China
  • Body material
    Stainless steel AISI 304
  • Maximum allowable temperature
    180 °C
  • Connection type
    For welding
  • Control type
    Pneumatic actuator
  • Operating environment
    Water, steam, petroleum products, neutral media, gaseous media
  • Applications
    Water supply, heating, industry
  • Nominal pressure
    25 bar
  • Type of seal
    PTFE / PTFE / Teflon
  • Locking material
    Stainless steel AISI 304
  • Explosion-proof
    Yes
  • Limit switches
    Yes
  • Type of pneumatic actuator
    double action
  • Angle of rotation
    90°

Reviews (0)

Documentation

Payment & Security

Payment methods

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Available Variants

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-57290DN8025 bar €769,18 Out of stock
    D160-57291DN10016 bar €1.045,64 Out of stock

    Frequently Asked Questions

    Shipping

    What countries do you ship to?

    We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.

    How long will it take to receive my order?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).