Elephant  |  SKU : D050-38482

Vanne papillon d'eau Elephant WBV1132N-2W-Fb-H, matériau du corps - fonte grise GG25, matériau du disque - acier inoxydable AISI 316L, joint - NBR, avec actionneur pneumatique double effet PA-DA, 4M310-08 24V, volant MON, BKV APL-510N-EX

€344,85
Taxes incluses Frais de livraison calculés lors du paiement.

Livraison et expédition

Les frais de livraison sont déterminés lors du processus de paiement et varient en fonction de plusieurs facteurs, notamment le type de produit, le délai de livraison, le fournisseur de services et le pays de destination.

Si vous avez des questions sur nos produits, nos options de livraison ou toute autre chose, n'hésitez pas à nous contacter.

Description

Butterfly valve model WBV1132N-2W-Fb PA-DA 4M310-08 APL-510N-EX MON 4M310-08 24V is designed for use as shut-off or regulating valves to control flows in heating systems, water supply, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.

PA-DA pneumatic actuators are designed for automation of industrial shut-off valves control process - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.

Pneumatic actuators 4m310-08 24 V are used for control in pneumatic systems having NAMUR docking surface, for installation of actuators through through holes in the body.

The HDM worm gear reduction manual doublet allows manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution to the full range of manual override applications.

The APL-510N-EX limit switch unit is an electrotechnical device designed to open and close the working circuit and to visualize the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.

 

 

Technical parameters of Elephant WBV1132N-2W-Fb-H butterfly valves, body material - gray cast iron GG25, disc material - stainless steel AISI 316L, sealing - NBR, with double-acting pneumatic actuator PA-DA, 4M310-08 24V, handwheel MON, BKV APL-510N-EX:

Nominal diameter DN, mm 40-200
Working pressure PN, bar 16
Working medium temperature t, ⁰C -20 to +120
Working medium cold and hot water, air without oil and grease impurities, other media neutral to the material
Flow direction double-sided
Body material cast iron GG25
Control type manual (handle)
Supplement electric or pneumatic actuator possible (ISO 5211-2001)

Затворы дисковые поворотные DN.ru WBV1132N-2W-Fb Ду40-300 Ру16, корпус - чугун GG25, уплотнение - NBR, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4M310-08 220В, с БКВ APL-510N-EX, с ручным дублером MON1-250-T26-ISO

Butterfly valves WBV1132N-2W-Fb-H, body material - grey cast iron GG25, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA, 4M310-08 24V, handwheel MON, BKV APL-510N-EX

 

 

Dimensions and dimensions of butterfly valves Elephant WBV1132N-2W-Fb-H, body material - gray cast iron GG25, disc material - stainless steel AISI 316L, sealing - NBR, with double-acting pneumatic actuator PA-DA, 4M310-08 24V, handwheel MON, BKV APL-510N-EX:

DN A, mm C, mm K, mm L1, mm E, mm K, mm I, mm
40 114 153 121.4 153 34 180 104
50 131 174 121.4 174 43 180 104
65 140 174 121.4 174 46 180 104
80 150 216 121.4 216 46 180 104
100 163 216 121.4 216 52 200 115
125 178 279 121.4 279 56 200 115
150 191 279 121.4 279 56 280 158
200 238 308 121.4 308 60 280 158
250 285 405 121.4 405 68 320 165
300 315 465 121.4 465 78 320 165

Затворы дисковые поворотные DN.ru WBV1132N-2W-Fb Ду40-300 Ру16, корпус - чугун GG25, уплотнение - NBR, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4M310-08 220В, с БКВ APL-510N-EX, с ручным дублером MON1-250-T26-ISO

Sketch Butterfly valves WBV1132N-2W-Fb-H, body material - grey cast iron GG25, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA, 4M310-08 24V, handwheel MON, BKV APL-510N-EX

 

 

Materials of butterfly valves Elephant WBV1132N-2W-Fb-H, body material - gray cast iron GG25, disc material - stainless steel AISI 316L, sealing - NBR, with double-acting pneumatic actuator PA-DA, 4M310-08 24V, handwheel MON, BKV APL-510N-EX:

Part name Material
1 Body cast iron GG25
2 Seat seal NBR
3 Disk stainless steel 316L
4 Rod SS AISI 416
5 Pin SS AISI 420
6 Sleeve PTFE
7 O-ring NBR
8 Plate carbon steel
9 Handle ductile iron

Затворы дисковые поворотные DN.ru WBV1132N-2W-Fb Ду40-300 Ру16, корпус - чугун GG25, диск - нержавеющая сталь 316L, уплотнение - NBR, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4M310-08 220В, с БКВ APL-510N-EX

Sketch of parts and materials Butterfly valves WBV1132N-2W-Fb-H, body material - grey cast iron GG25, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA, 4M310-08 24V, handwheel MON, BKV APL-510N-EX

 

 

Technical data of PA-DA pneumatic actuators:

Design Double action
Nominal pressure PN, bar 12
Working pressure, bar 2...8
Working medium Filtered compressed air or non-aggressive gases, oils
Maximum particle diameter less than 30 µm2
Operating temperature t, ⁰C - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air)
Adjustment range ± 5 ° for rotation at 0 ° and 90 °
Manual override is
Position indicator open/closed
Operating environment indoors and outdoors. (All internal and external parts are anti-corrosion coated)


Затворы дисковые поворотные DN.ru WBV0232E-2W-Fb Ду25-32 Ру16, корпус - алюминевый сплав, диск - нержавеющая сталь 316L, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4V320-08 220В

PA-DA pneumatic actuator

 

 

PA-DA pneumatic actuator component materials:

Name Material
1 Enclosure extruded aluminum
2 Side plugs cast aluminum
3 Gear stainless steel
4 Piston steel/aluminum
5 Plugs stainless steel
6 Piston ring NBR
7 Springs spring steel
8 Piston bearing engineering plastic
9 Piston ring NBR
10 Plug NBR
11 Thrust ring engineering plastic
12 Ring engineering plastic
13 Washer stainless steel
14 Spring clip stainless steel
15 Indicator plastic
16 Indicator housing plastic
17 Bearing engineering plastic
18 Cam steel
19 Bearing NBR
20 Bearing engineering plastic
21 Bearing engineering plastic
22 Sealing ring NBR
23 Sealing ring NBR
24 Bearing stainless steel
25 Adjustment nut stainless steel
26 Adjustment screw stainless steel
27 Sleeve aluminum
Затворы дисковые поворотные DN.ru WBV0232E-2W-Fb Ду25-32 Ру16, корпус - алюминевый сплав, диск - нержавеющая сталь 316L, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4V320-08 220В
Parts and material sketch of the PA-DA pneumatic actuator

 

 

Technical characteristics of the pneumatic valve 4m310-08 24V:

Design spool type
Nominal pressure PN, MPa (kg/cm2) 1,2 (12)
Working pressure, bar 1,5...8
Working medium filtered compressed air
Ambient temperature t, ⁰C +5 to +50
Response frequency 5 cycles/s
Manual duplication is
Degree of protection IP 65
Mounting through holes in the housing
Enclosure material anodized aluminum
Response time 0.05 sec.

 

 

HDM handwheel materials:

Name Material
1 Stem for mounting the pneumatic actuator Steel 45
2 Sealing ring EPDM
3 Fixing spring Spring steel
4 Upper end cover Aluminum alloy
5 Screw Steel 304
6 Locking bracket (main rod) Steel 304
7 Housing Aluminum alloy
8 Sealing ring EPDM
9 Gear unit Cast iron BCh50
10 Transition coupling Cast iron BCh40
11 Gear stem Cast iron BCh40

Затворы дисковые поворотные DN.ru WBV0232E-2W-Fb Ду25-32 Ру16, корпус - алюминевый сплав, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4M310-08 220В, с БКВ APL-510N-EX, с ручным дублером MON1-250-T26-ISO

Materials of the handwheel

 

 

Characteristics of limit switch unit APL-510N-EX:

Parameter Significance
Enclosure all-weather IP67/ NEMA4 4X,7,9
explosion-proof E EX d IIC T6
Compatible devices quarter-turn pneumatic actuators;
- any actuators with shaft rotation by 90
Full rotation angle 90°
Cable glands 2 x NPT 3/4”
Electrical connection screw terminals 8 points (0.08 - 2.5) mm2
Cable gland thread 2 x NPT 3/4”
Type of visual indicator two-color hemisphere: OPEN (Open) - yellow CLOSED (Closed) - red
Switches/sensors two mechanical switches two proximity sensors
Rated voltage, V 250
Rated current, A 16
Permissible ambient temperature, °С от -20 до +66
Average life, cycles 10 000 000
Weight, kg 1.8

Avis (0)

Paiement et sécurité

Moyens de paiement

    Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

    Variantes disponibles

    SKUTaille de la connexionPressionPrice AvailabilityQuantity Add to cart
    D050-38482DN4016 bars €344,85 77 in stock
    D050-38483DN5016 bars €331,75 77 in stock
    D050-38484DN6516 bars €340,29 77 in stock
    D050-38485DN8016 bars €366,42 77 in stock
    D050-38486DN10016 bars €409,25 77 in stock
    D050-38487DN12516 bars €449,81 77 in stock
    D050-38488DN15016 bars €513,45 77 in stock
    D050-38489DN20016 bars €670,14 77 in stock
    D050-38490DN25016 bars €887,17 77 in stock
    D050-38491DN30016 bars €1.248,85 77 in stock

    Questions fréquemment posées

    Expédition

    Dans quels pays expédiez-vous ?

    Nous proposons actuellement des livraisons en France et dans toute l'UE, ainsi que des options de livraison internationales. Si vous avez une destination spécifique en tête qui n'est pas répertoriée, n'hésitez pas à nous contacter pour plus d'informations.

    Combien de temps faudra-t-il pour recevoir ma commande ?

    L'expédition standard prend normalement 3 à 7 jours. L'expédition le lendemain est disponible pour toutes les commandes nationales (moyennant des frais supplémentaires). Les délais d'expédition internationaux dépendent des produits et de la destination (estimés au moment du paiement).

    Retours et remboursements

    Comment retourner un produit ?

    Les articles doivent être retournés dans les 30 jours suivant la réception de votre commande. Les articles doivent être retournés dans le même état dans lequel ils ont été reçus, ne pas être portés/utilisés, avoir toutes les étiquettes encore attachées et inclure tous les emballages d'origine.

    Combien de temps faudra-t-il pour recevoir mon remboursement ?

    Les remboursements sont traités dans les 7 jours suivant la réception des articles.