Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN50-150 full bore, – Valve Elephant
Elephant  |  SKU: D160-52517

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN50-150 full bore, body - stainless steel 316, welded, with Elephant PA-DA pneumatic actuator, Elephant MON reducer and YT-1000RSN pneumatic positioner

€1.517,90
Impuestos incluidos. Los gastos de envío se calcularán al momento de pagar.

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN50-150 full bore, body - stainless steel 316, welded, with Elephant PA-DA pneumatic actuator, Elephant MON reducer and YT-1000RSN pneumatic positioner - DN100 / 25 bar está agotado y se enviará tan pronto como vuelva a estar disponible.

Entrega y envío

El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.

Si tiene alguna pregunta sobre nuestros productos, opciones de envío o cualquier otra cosa, no dude en comunicarse con nosotros.

Descripción

The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.

Pneumatic actuators Elephant double-acting rotary PA-DA-XXX are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.

The manual override with worm gear and reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution for the entire range of manual override tasks.

Electro-pneumatic rotary positioner is used to control rotary type pneumatic actuators by means of electric controller or control system with analog DC output signal in the range of 4 to 20 mA.

 

 

Technical parameters of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN50-150 PN16-40 full bore, body - stainless steel 316, for welding, with pneumatic actuator Elephant PA-DA, reducer Elephant MON and pneumatic positioner YT-1000RSN:

Name Meaning
Working environment temperature, °C from -20 to 180
Type of crane device two-way
Application water supply, heat supply, industry
Working environment water, steam, petroleum products, neutral media, gaseous media
Connection to the pipeline for welding
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining for welding
Control double acting pneumatic actuator
Availability of limit switches No
Availability of pneumatic distributor No
Availability of electropneumatic positioner There is
Average service life, years 5
Warranty, g. 1

 

 

Sketch of the dimensions and sizes of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN50-150 РN16-40 full bore, body - stainless steel 316, for welding, with pneumatic actuator Elephant PA-DA, reducer Elephant MON and pneumatic positioner YT-1000RSN


Dimensions and sizes of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN50-150 РN16-40 full bore, body - stainless steel 316, for welding, with pneumatic actuator Elephant PA-DA, reducer Elephant MON and pneumatic positioner YT-1000RSN:

Model L, mm H1, mm A, mm E, mm S, mm C, mm
Du50 243 133 216 109 62.5 117.5
Du65 290 133 216 109 62.5 117.5
Du80 302 133 216 109 62.5 117.5
Du100 326 180 279 134 62.5 117.5
Du125 360 180 308 157 62.5 117.5
Du150 390 195 405 174 62.5 117.5

 

 

Sketch of parts and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 РN16-63 full bore, body - stainless steel 316, for welding, with pneumatic actuator Elephant PA-DA and pneumatic positioner YT-1000RSN

 


Table of parts and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN50-150 РN16-40 full bore, body - stainless steel 316, for welding, with pneumatic actuator Elephant PA-DA, reducer Elephant MON and pneumatic positioner YT-1000RSN:

Item No. Part name Material
1 Frame stainless steel 316
2 Side element (2 pcs) stainless steel 316
3 Ball stainless steel 316
4 Ball seal PTFE
5 Rod seal PTFE
6 Sleeve stainless steel 304
7 Stock stainless steel 316
8 Washer stainless steel
9 screw steel A2-70
10 Bolt steel A2-70

 

 

Pneumatic drive Elephant

 

Technical parameters of pneumatic drives Elephant

Name Meaning
Design double acting
Control pressure, bar 2 ÷ 8

 

 

Sketch of the dimensions and sizes of the pneumatic drive Elephant

 

Dimensions and sizes of the pneumatic drive Elephant:

Model PA-DA-83 PA-DA-105 PA-DA-130 PA-DA-140
A1, mm 152 189 210 268
B1, mm 216 279 308 405
C, mm 46 55 67.5 76
D, mm 55 64 70 77
E, mm 109 134 157 174
F, mm 26 26 36 36
G, mm 15 25 25 30
H, mm F05 F07 F07 F10
I, mm F07 F10 F10 F12
J, mm 4-M6x10 4-M8x12 4-M8x12 4-M10x16
K, mm 4-M8x12 4-M10x16 4-M10x16 4-M12x20
L, mm 17x17 22x22 22x22 27x27
Mmm 80 80 80 130
N, mm 30 30 30 30
F0, mm 34 41 62 62
R, mm 20 20 30 30

 

 

Table of parts and materials of pneumatic drive Elephant:

No. Name Quantity Material Coating
1 Frame 1 extruded aluminum hard anodized
2 Side plugs 2 cast aluminum
3 Gear 1 stainless steel nickel plated
4 Piston 2 steel/aluminum oxidation/galvanic zinc plating
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel epoxy coating
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clamp 2 stainless steel
15 Indicator 1 plastic
16 Indicator housing 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel oxidation/galvanic zinc plating
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 Sealing ring 2 NBR
23 Sealing ring 2 NBR
24 Bearing 2 stainless steel
25 Adjusting nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Sleeve 2 aluminum

 

 

Electropneumatic rotary positioners ElephantYT-1000RSN

 


Technical parameters of electropneumatic rotary positioners Elephant YT-1000RSN

Name Meaning
Model of electropneumatic positioner YT-1000RSN
Input control signal, mA 4~20
Internal resistance, Ohm 250(±15)
Input pressure, bar 1.4~7
Lever stroke angle 0~90°
Compressed air connection thread 1/4″
Pressure gauge connection thread 1/8″
Cable entry G1/2″
Type of protection IP66
Compressed air consumption, l/min 3
Air flow at outlet, l/min 80
Body material aluminum casting

 

 

Sketch of dimensions and sizes of electropneumatic rotary positioners Elephant YT-1000RSN

 

Dimensions and sizes of electropneumatic rotary positioners Elephant YT-1000RSN:

Positioner model YT-1000RSI
A, mm 224.3
B, mm 166.5
C, mm 117.5
D, mm 132.3
E, mm 6
F, mm 122
G, mm 45
H, mm 45
I, mm 23
J, mm 27
K, mm 32.5
L, mm 35.5
M, mm 91.8
N, mm 37.2
O, mm 43.5
P, mm 26.5
Q, mm 33
R, mm 80.25
S, mm 62.5
T, mm 8
U1, mm 70
U2, mm 93
V1, mm 40
V2, mm 63
W, mm 26
X, mm 32
Y, mm 9
Z, mm 24



Manual backups Elephant MON

 

Technical parameters of manual backups Elephant MON

Name Meaning
Manual backup model MON
Climate performance U, UHL, T, OM
Installation method horizontal/vertical
Degree of protection, IP 67
Connection type ISO 5211

 

 

Sketch of dimensions and sizes of manual backups Elephant MON

 

Dimensions and sizes of manual backup valves Elephant MON:

Model MON2-450-T28-ISO MON3-700-T38-ISO MON4-1200-T54-ISO
b1, mm 17 22 27
N, mm 22 28 32
b2, mm 17 22 27
M, mm 18 22 30
D1, mm Ø70 Ø102 Ø102
4-M1, mm 4-M8 4-M10 4-M10
D2, mm Ø102 Ø125 Ø125
4-M2, mm 4-M10 4-M12 4-M12
E, mm 95x95 114x114 129x129
D3, mm Ø70 Ø102 Ø125
4-Ø1, mm 4-Ø8.5 4-Ø10.5 4-Ø12.5
D4, mm Ø102 Ø125 Ø140
4-Ø2, mm 4-Ø10.5 4-Ø12.5 4-Ø16.5
A, mm 125 140 188.5
B, mm 64 71 93
ØC, mm Ø110 Ø129 Ø174
F, mm 135 166 202
T, mm 62.5 70 94
Y, mm 178 212 280
H, mm 133 180 195
S, mm 56.5 68.7 84
K, mm 13 12.5 15
Ø steering wheel, mm 200 280 320

 

 

Sketch of parts and materials of manual backups Elephant MON

 

Table of parts and materials of manual backups Elephant MON:

Item No. Details Material
1 Rod for mounting a pneumatic actuator steel 45
2, 8 Sealing ring EPDM
3 Locking spring spring steel
4 Top end cap aluminum alloy
5 Screw steel 304
6 Fixing bracket (main rod) steel 304
7 Frame aluminum alloy
9 Reducer cast iron VCh50
10 Transition coupling cast iron VCh40
11 Gearbox rod cast iron VCh40

 

Passports and certificates

Data sheet for Elephant DA/SA-xxx double-acting pneumatic actuator with return springs

Especificaciones
  • País de origen
    China
  • Apertura de puerto
    full bore
  • Temperatura máxima permitida
    180 °C
  • Tipo de conexión
    For welding
  • Entorno operativo
    water, steam, petroleum products, neutral media, gaseous media
  • Tipo de sello
    PTFE
  • Interruptores de límite
    no
  • Tipo de actuador neumático
    double action

Reseñas (0)

Documentation

Pago y seguridad

Métodos de pago

    Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

    Variantes disponibles

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-52517DN10025 bar €1.517,90 0 in stock
    D160-52518DN100 with feedback25 bar €1.639,16 0 in stock
    D160-52520DN12516 bar €2.495,48 0 in stock
    D160-52521DN125 with feedback16 bar €2.616,73 0 in stock
    D160-52523DN15016 bar €3.514,17 0 in stock
    D160-52524DN150 with feedback16 bar €3.635,43 0 in stock
    D160-52534DN5040 bar €768,65 0 in stock
    D160-52535DN50 with feedback40 bar €889,91 0 in stock
    D160-52536DN6525 bar €952,24 0 in stock
    D160-52537DN65 with feedback25 bar €1.073,49 0 in stock
    D160-52538DN8025 bar €1.107,78 0 in stock
    D160-52539DN80 with feedback25 bar €1.229,03 0 in stock

    Preguntas frecuentes

    Envío

    ¿A qué países realizan envíos?

    Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.

    ¿Cuánto tiempo tardaré en recibir mi pedido?

    El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).

    Devoluciones y reembolsos

    ¿Cómo devuelvo un producto?

    Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.

    ¿Cuánto tiempo tardaré en recibir mi reembolso?

    Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.