Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 full bore, – Valve Elephant
Elephant  |  SKU: D160-51748

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 full bore, body - stainless steel 316, for welding, with pneumatic actuator PA-DA, pneumatic distributor 4M310-08 220V, BKV APL-510N EX and GSV AFC2000

€273,87
Impuestos incluidos. Los gastos de envío se calcularán al momento de pagar.

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 full bore, body - stainless steel 316, for welding, with pneumatic actuator PA-DA, pneumatic distributor 4M310-08 220V, BKV APL-510N EX and GSV AFC2000 - DN10 / 63 bar está agotado y se enviará tan pronto como vuelva a estar disponible.

Entrega y envío

El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.

Si tiene alguna pregunta sobre nuestros productos, opciones de envío o cualquier otra cosa, no dude en comunicarse con nosotros.

Descripción

The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.

Pneumatic actuators Elephant double-acting rotary PA-DA-XXX are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.

Pneumatic distributors are used for control in pneumatic systems with a NAMUR mating surface for installing distributors through through holes in the body. Electromagnetic control is carried out using voltage coils 12-AC, 12-DC, 24-AC, 24-DC, 110-AC, 220-AC. Depending on the model, distributors have one-sided or two-sided control. Pneumatic distributors with electromagnetic control have a wide range of models and include common types of switching for three (3/2) and five (5/2 and 5/3) linear pneumatic distributors. Intended for use with quarter-turn pneumatic actuators.

The limit switch unit is designed for visual and electrical signaling of the end positions of the shut-off element of the valve: valve, tap or butterfly valve. It is installed on top of the surface of the pneumatic drive and connected to the DIN standard drive shaft. In a sealed box, as a rule, there are two sensors that monitor the position of the drive shaft and signal in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. Visual indication of the position can be seen on the body of the unit there is a 3D visual indicator RED - CLOSED and GREEN - OPEN.

The air preparation unit is designed to clean compressed air from droplet moisture and solid particles, remove condensate, automatically maintain pressure at a given level, and supply lubricant from the reservoir to the compressed air flow to the elements of the pneumatic system.

 

 

Technical parameters of Elephant BV3232P(3pc)-FP-W-ISO-H LONG ball valves DN10-150 PN16-63 full bore, body - stainless steel 316, for welding, with PA-DA pneumatic actuator, 4M310-08 220V pneumatic distributor, APL-510N EX and AFC2000:

Name Meaning
Working environment temperature, °C from -20 to 180
Type of crane device two-way
Application water supply, heat supply, industry
Working environment water, steam, petroleum products, neutral media, gaseous media
Connection to the pipeline for welding
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining for welding
Control double acting pneumatic actuator
Availability of limit switches There is
Availability of pneumatic distributor There is
Availability of electropneumatic positioner No
Average service life, years 5
Warranty, g. 1

 

 

Sketch of the overall dimensions and sizes of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 РN16-63 full bore, body - stainless steel 316, for welding, with pneumatic actuator PA-DA, pneumatic distributor 4M310-08 220V, APL-510N EX and AFC2000


Dimensions and sizes of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 PN16-63 full bore, body - stainless steel 316, for welding, with pneumatic actuator PA-DA, pneumatic distributor 4M310-08 220V, APL-510N EX and AFC2000:

Model L, mm A, mm E, mm I, mm B, mm C, mm
DN10 130 153 72 162 88 139
DN15 150 153 72 162 88 139
DN20 155 174 89 162 88 139
DN25 186 216 109 162 88 139
DN32 195 153 72 162 88 139
DN40 231 174 89 162 88 139
DN50 243 216 109 162 88 139
DN65 290 216 109 162 88 139
DN80 302 216 109 162 88 139
DN100 326 279 134 162 88 139
DN125 360 308 157 162 88 139
DN150 390 405 174 162 88 139

 

 

Sketch of parts and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 РN16-63 full bore, body - stainless steel 316, for welding, with pneumatic actuator PA-DA, pneumatic distributor 4M310-08 220V, APL-510N EX and AFC2000

 


Table of parts and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 PN16-63 full bore, body - stainless steel 316, for welding, with pneumatic actuator PA-DA, pneumatic distributor 4M310-08 220V, APL-510N EX and AFC2000:

Item No. Part name Material
1 Frame stainless steel 316
2 Side element (2 pcs) stainless steel 316
3 Ball stainless steel 316
4 Ball seal PTFE
5 Rod seal PTFE
6 Sleeve stainless steel 304
7 Stock stainless steel 316
8 Washer stainless steel
9 screw steel A2-70
10 Bolt steel A2-70

 

 

Pneumatic drive Elephant

 


Technical parameters of the pneumatic drive Elephant

Name Meaning
Design double acting
Control pressure, bar 2 ÷ 8

 

 

Sketch of the dimensions and sizes of the pneumatic drive Elephant

 

Dimensions and sizes of the pneumatic drive Elephant:

Model PA-DA-52 PA-DA-65 PA-DA-83 PA-DA-105 PA-DA-130 PA-DA-140
A1, mm 108 125 152 189 210 268
B1, mm 153 174 216 279 308 405
C, mm 30 36 46 55 67.5 76
D, mm 41 46 55 64 70 77
E, mm 72 89 109 134 157 174
F, mm 26 26 26 26 36 36
G, mm 15 15 15 25 25 30
H, mm F03 F05 F05 F07 F07 F10
I, mm F05 F07 F07 F10 F10 F12
J, mm 4-M5x8 4-M6x10 4-M6x10 4-M8x12 4-M8x12 4-M10x16
K, mm 4-M6x10 4-M8x12 4-M8x12 4-M10x16 4-M10x16 4-M12x20
L, mm 11x11 14x14 17x17 22x22 22x22 27x27
Mmm 80 80 80 80 80 130
N, mm 30 30 30 30 30 30
F0, mm 34 34 34 41 62 62
R, mm 20 20 20 20 30 30

 

 

Table of parts and materials of pneumatic drive Elephant:

No. Name Quantity Material Coating
1 Frame 1 extruded aluminum hard anodized
2 Side plugs 2 cast aluminum
3 Gear 1 stainless steel nickel plated
4 Piston 2 steel/aluminum oxidation/galvanic zinc plating
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel epoxy coating
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clamp 2 stainless steel
15 Indicator 1 plastic
16 Indicator housing 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel oxidation/galvanic zinc plating
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 Sealing ring 2 NBR
23 Sealing ring 2 NBR
24 Bearing 2 stainless steel
25 Adjusting nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Sleeve 2 aluminum

 

 

Pneumatic distributors Elephant 4M310-08 220V

 

Technical parameters of pneumatic distributors Elephant 4M310-08 220V

Name Meaning
Type of pneumatic distributor spool valve
Model of pneumatic distributor 4M310-08 220V
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220V
Response frequency, cycles/sec 5



Sketch of dimensions and sizes of pneumatic distributors Elephant 4M310-08 220V

 

Dimensions and sizes of pneumatic distributors Elephant 4M310-08 24V

Model of pneumatic distributor 4M310-08
D, mm 32
E, mm 69
F, mm 40
I, mm 45
K, mm 40
L, mm 134.5
M, mm 40
N, mm 24
S, mm 27
U, mm 2.4
H, mm 17.5

 

 

Limit Switch Block Elephant APL-510N EX

 

Technical parameters of the limit switch unit Elephant APL-510N EX

Name Meaning
Limit switch block model APL-510N EX
Ambient temperature, °C from -20 to 66
Service life, years 10

 

 

Sketch of the dimensions and sizes of the limit switch block Elephant APL-510N EX

 

 

Dimensions and sizes of the limit switch unit Elephant APL-510N EX:

Model APL-510N EX
A, mm 118
B, mm 118
C, mm 138.4
D, mm 17
E, mm 19
F, mm 7
G, mm 3
H, mm 4
I, mm 59
J, mm 59
K, mm 59
L, mm 59
M, mm 121.4
Ød1, mm 50
Ød2, mm 5

  

 

Air preparation unit Elephant AFC2000

 

Technical parameters of the air preparation unit Elephant AFC2000

Name Meaning
Working pressure, bar 8
Adjustable pressure range, bar 0.5 ÷ 9
Size of filtered particles, µm 40 microns
Weight, kg 0.395

 

 

Sketch of the dimensions and sizes of the air preparation unit Elephant AFC2000

 

Dimensions and sizes of the air preparation unit Elephant AFC2000:

Model BPV AFC2000
A, mm 162
B, mm 88
C, mm 139
D, mm 31
E, mm 53.5
F, mm 12
G, mm 8
H, mm 7
I, mm 13.3
J, mm 39
K, mm 5
L, mm 40
M, mm 32
N, mm 53
O, mm 29
P, mm 6
R, mm 41.5

Especificaciones
  • País de origen
    China
  • Apertura de puerto
    full bore
  • Temperatura máxima permitida
    180 °C
  • Tipo de conexión
    For welding
  • Entorno operativo
    water, steam, petroleum products, neutral media, gaseous media
  • Tipo de sello
    PTFE
  • Interruptores de límite
    have
  • Tipo de actuador neumático
    double action

Reseñas (0)

Documentation

Pago y seguridad

Métodos de pago

    Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

    Variantes disponibles

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-51748DN1063 bar €273,87 0 in stock
    D160-51749DN10025 bar €1.177,08 0 in stock
    D160-51750DN12516 bar €2.154,65 0 in stock
    D160-51751DN1563 bar €273,87 0 in stock
    D160-51752DN15016 bar €3.083,56 0 in stock
    D160-51753DN2063 bar €333,11 0 in stock
    D160-51754DN2563 bar €338,94 0 in stock
    D160-51755DN3263 bar €341,51 0 in stock
    D160-51756DN4040 bar €395,98 0 in stock
    D160-51757DN5040 bar €473,48 0 in stock
    D160-51758DN6525 bar €657,06 0 in stock
    D160-51759DN8025 bar €812,60 0 in stock

    Preguntas frecuentes

    Envío

    ¿A qué países realizan envíos?

    Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.

    ¿Cuánto tiempo tardaré en recibir mi pedido?

    El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).

    Devoluciones y reembolsos

    ¿Cómo devuelvo un producto?

    Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.

    ¿Cuánto tiempo tardaré en recibir mi reembolso?

    Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.