Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H 16 bar/25, full bore for – Valve Elephant
Elephant  |  SKU: D160-46323

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H 16 bar/25, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000

€212,61
Impuestos incluidos. Los gastos de envío se calcularán al momento de pagar.

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H 16 bar/25, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000 - DN10 / 63 bar está agotado y se enviará tan pronto como vuelva a estar disponible.

Entrega y envío

El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.

Si tiene alguna pregunta sobre nuestros productos, opciones de envío o cualquier otra cosa, no dude en comunicarse con nosotros.

Descripción

The Elephant ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.

Pneumatic actuators Elephant double-acting rotary PA-DAXXX and pneumatic rotary actuators with return spring PA-SA-XXX are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.

The pneumatic distributor is used to change the direction, start, and stop the flow of compressed air in a pneumatic system depending on the external control action.

The limit switch unit is designed for visual and electrical signaling of the end positions of the shut-off element of the valve: valve, tap or butterfly valve. It is installed on top of the surface of the pneumatic drive and connected to the DIN standard drive shaft. In a sealed box, as a rule, there are two sensors that monitor the position of the drive shaft and signal in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. Visual indication of the position can be seen on the body of the unit there is a 3D visual indicator RED - CLOSED and GREEN - OPEN.

The air preparation unit is designed to clean compressed air from droplet moisture and solid particles, remove condensate, automatically maintain pressure at a given level, and supply lubricant from the reservoir to the compressed air flow to the elements of the pneumatic system.

 

 

Technical parameters of the ball valves Elephantu BV3232P(3pc)-FP-W-ISO-H DN10-100 PNu63/25, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000:

Name Meaning
Working environment temperature, °C from -20 to 200
Application water supply, heat supply, steam supply
Working environment water, steam, petroleum products, neutral media
Connection to the pipeline for welding
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining for welding
Control double acting pneumatic actuator
Availability of limit switches There is
Availability of pneumatic distributor There is
Warranty, g. 1

 

 

Sketch Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-100 PN63/25, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000


Dimensions and sizes of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-100 PN63/25, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000:

Size D, mm L, mm B1, mm E, mm H2, mm X, mm Y, mm B, mm H, mm
DN10 10 63 153 72 38.9 162 139 17.2 77
DN15 15 65 153 72 40 162 139 21.3 77
DN20 20 75 153 72 43.9 162 139 26.7 77
DN25 25 83 153 72 53 162 139 33.5 77
DN32 32 98 153 72 56 162 139 42.2 77
DN40 40 112 174 89 60 162 139 48.3 77
DN50 50 135 174 89 75 162 139 60.5 77
DN65 65 175 216 109 97 162 139 73.2 77
DN80 80 198 216 109 112 162 139 88.9 77
DN100 100 246 216 109 122 162 139 114.3 77

 

 

Sketch of parts and materials Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-100 PN63/25, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000

 


Table of parts and materials Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-100 PN63/25, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000:

Item No. Details Material
1 Frame Steel SS316
2 Ball valve Steel S304/S316
3 Bolt Steel S201/S304
4 screw Steel S201/S304
5 Sealing Polytetrafluoroethylene PTFE
6 Stock Steel SS304/SS316
7 Seal Steel S201/S304
8 Sealing ring VITON
9 Lid Steel WCB/CF8/CF8M
10 Saddle rings Polymerized resin PPL
11 Thrust washer Polytetrafluoroethylene PTFE

 

 

Pneumatic drive Elephant

 

Technical parameters of the pneumatic drive Elephant

Name Meaning
Design with return springs
Working pressure, bar 6
Working environment filtered compressed air or non-aggressive gases, oils
Availability of manual backup No

 

 

Sketch of the dimensions and sizes of the pneumatic drive Elephant

 

Dimensions and sizes of the pneumatic drive Elephant:

Drive model DA-052 DA-065 DA-083
G, mm 15 15 15
Mmm 80 80 80
N, mm 30 30 30
F0, mm 34 34 34
R, mm 20 20 20
B1, mm 153 174 216
C, mm 30 36 46
E, mm 72 89 109
J 4-M5x8 4-M6x10 4-M6x10
TO 4-M6x10 4-M8x12 4-M8x12
F, mm 26 26 26
A1, mm 108 125 152
D, mm 41 46 55
L 11x11 14x14 17x17
H F03 F05 F05
I F05 F07 F07

 

 

Sketch of parts and materials of pneumatic drive Elephant

 

Table of parts and materials of pneumatic drive Elephant:

No. Name Quantity Material Coating
1 Frame 1 extruded aluminum hard anodized
2 Side plugs 2 cast aluminum
3 Gear 1 stainless steel nickel plated
4 Piston 2 steel/aluminum oxidation/galvanic zinc plating
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel epoxy coating
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clamp 2 stainless steel
15 Indicator 1 plastic
16 Indicator housing 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel oxidation/galvanic zinc plating
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 Sealing ring 2 NBR
23 Sealing ring 2 NBR
24 Bearing 2 stainless steel
25 Adjusting nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Sleeve 2 aluminum

 

 

Pneumatic distributor Elephant

Technical parameters of the pneumatic distributor Elephant

Name Meaning
Type of pneumatic distributor spool valve
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220V
Full power, Va 4.5
Control two-way electromagnetic
Response frequency, cycles/sec 5

 

 

Sketch of the dimensions and sizes of the pneumatic distributor Elephant

 

Dimensions and sizes of the pneumatic distributor Elephant:

Model of pneumatic distributor 4V320-08
A, mm 71.9
B, mm 45
C, mm 94.4
D, mm 27
E, mm 69
F, mm 40
I, mm 24
K, mm 40
L, mm 188.8
M, mm 69.4
N, mm 50
O, mm 82.4
P, mm 24
S, mm 20
T, mm 6.5
U, mm 2.4
V, mm 4
H, mm 82.4

 

 

Limit Switch Block Elephant

 

Technical parameters of the limit switch block Elephant

Name Meaning
Maximum limit switch voltage, V 250
Working environment temperature, °C from -40 to +80
Service life, years 10

 

 

Sketch of the dimensions and sizes of the limit switch block Elephant

 

Dimensions and sizes of the Elephant limit switch block:

Model H, mm L, mm B, mm D, mm D1, mm M
APL-210N 77 112 88 10 5 20x1.5

 

 

Air preparation unit Elephant AFC2000

 

Technical parameters of the air preparation unit Elephant AFC2000

Name Meaning
Working pressure, bar 8
Adjustable pressure range, bar 0.5 ÷ 9
Size of filtered particles, µm 40 microns
Weight, kg 0.395

 

 

Sketch of the dimensions and sizes of the air preparation unit Elephant AFC2000

 

Dimensions and sizes of the air preparation unit Elephant AFC2000:

Model BPV AFC2000
A, mm 162
B, mm 88
C, mm 139
D, mm 31
E, mm 53.5
F, mm 12
G, mm 8
H, mm 7
I, mm 13.3
J, mm 39
K, mm 5
L, mm 40
M, mm 32
N, mm 53
O, mm 29
P, mm 6
R, mm 41.5

 

 

 

Passports and certificates

Data sheet for Elephant DA/SA-xxx double-acting pneumatic actuator with return springs

Especificaciones
  • País de origen
    China
  • Apertura de puerto
    full bore
  • Temperatura máxima permitida
    200 °C
  • Tipo de conexión
    For welding
  • Entorno operativo
    water, steam, oil products, neutral media
  • Tipo de sello
    PTFE
  • Interruptores de límite
    have
  • Tipo de actuador neumático
    double action

Reseñas (0)

Documentation

Pago y seguridad

Métodos de pago

    Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

    Variantes disponibles

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-46323DN1063 bar €212,61 0 in stock
    D160-46332DN10025 bar €751,07 0 in stock
    D160-46324DN1563 bar €212,63 0 in stock
    D160-46325DN2063 bar €220,90 0 in stock
    D160-46326DN2563 bar €228,10 0 in stock
    D160-46327DN3263 bar €240,49 0 in stock
    D160-46328DN4040 bar €281,34 0 in stock
    D160-46329DN5040 bar €311,10 0 in stock
    D160-46330DN6525 bar €433,07 0 in stock
    D160-46331DN8025 bar €535,61 0 in stock

    Preguntas frecuentes

    Envío

    ¿A qué países realizan envíos?

    Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.

    ¿Cuánto tiempo tardaré en recibir mi pedido?

    El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).

    Devoluciones y reembolsos

    ¿Cómo devuelvo un producto?

    Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.

    ¿Cuánto tiempo tardaré en recibir mi reembolso?

    Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.