Ball valves Elephant BV3232P-FP-Fb-ISO-H, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N
Ball valves Elephant BV3232P-FP-Fb-ISO-H, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N - DN100 / 16 bar está agotado y se enviará tan pronto como vuelva a estar disponible.
No se ha podido cargar la disponibilidad de recogida
Entrega y envío
Entrega y envío
El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.
Descripción
Descripción
The ball valve is used as a shut-off valve in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve. Use of ball valves as regulating valves is not allowed.
Double-acting pneumatic rotary actuator PA-DA-105-1 with hand wheel is designed for automation of industrial valve control process, as well as for determining the position of the valve shut-off valve.
Pneumatic distributor is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.
The limit switch unit is designed for visual and electrical signaling of the end positions of the valve shut-off body: valve, crane or disk gate. It is mounted on top of the pneumatic actuator surface and connected to the actuator shaft in DIN standard. The sealed box usually contains two sensors, which monitor the position of the actuator shaft and signalize in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. The visual indication of the position can be observed on the housing of the unit there is a 3D visual indicator RED-CLOSED and GREEN-OPEN.
Technical parameters Elephant BV3232P-FP-Fb-ISO-H, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N:
| Nominal diameter DN, mm | 15 - 100 |
| Nominal pressure PN, bar | 16 |
| Ambient temperature, ⁰C | from -50 to +200 |
| Tightness in the gate | according to class A of GOST 9544-2015 |
| Working medium | water, steam, oil products and other liquid or gaseous media neutral to the materials used |
| Connection to pipeline | interflange |
| Control type | manual (handle) |
| Ball passage | full bore without constriction |
| Complement | electric or pneumatic actuator can be installed (ISO 5211-2001) |
Elephant BV3232P-FP-Fb-ISO-H, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N
Dimensions and dimensions Elephant BV3232P-FP-Fb-ISO-H, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N
| DN | d, mm | D2, mm | D1, mm | D, mm | Т, mm | C, mm | L, mm | A, mm | Е, mm |
| 80 | 73 | 138 | 160 | 200 | 20 | 20 | 120 | 495 | 200 |
| 100 | 90 | 158 | 180 | 220 | 20 | 20 | 150 | 495 | 200 |
Sketch of dimensions and dimensions BV3232P-FP-Fb-ISO-H, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N
Parts and materials table BV3232P-FP-Fb-ISO-H, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N:
| № | Parts | Material |
| 1 | Nut | Steel 304 |
| 2 | Handle | Steel 201+PVC |
| 3 | Washer | Steel 304 |
| 4 | Locking ring | Steel 304 |
| 5 | Thrust washer | Steel 304 |
| 6 | Gland washer | Steel 304 |
| 7 | Gland | PTFE |
| 8 | Stop gasket | PTFE |
| 9 | Rod | Steel 316 |
| 10 | Ball cover | Steel 316 |
| 11 | Ball | Steel 316 |
| 12 | Ball seal | PTFE |
| 13 | Gasket | PTFE |
| 14 | Body | Steel 316 |
Parts and material sketch Elephant BV3232P-FP-Fb-ISO-H, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N
Technical parameters of pneumatic actuator PA-DA-105-1:
| Name | Significance |
| Construction | double action |
| Rated torque, Nm | 202 |
| Angle of rotation of actuator | 90° |
| Working pressure, bar | 8 |
| Working medium | filtered compressed air or non-aggressive gases, oils |
Pneumatic actuator PA-DA-105-1
Dimensions and dimensions of the pneumatic actuator PA-DA-105-1:
| A, mm | 495 |
| A1, mm | 461.5 |
| B, mm | 133 |
| C, mm | 109.5 |
| D, mm | 153 |
| E, mm | 57.5 |
| F, mm | 64 |
| G, mm | 26 |
| H, mm | 80 |
| I, mm | 30 |
| N, mm | 22 |
| W, mm | 200 |
| J, mm | 102 |
| K, mm | 70 |
| L, mm | М10х16 |
| M, mm | М8х13 |
| O, mm | 4 |
| P, mm | 4 |
| S, mm | M6 |
| T, mm | 24 |
| U, mm | 32 |
Sketch of dimensions and dimensions of pneumatic actuator PA-DA-105-1
PA-DA-105-1 air actuator parts and materials table:
| № | Name | Material |
| 1 | Indicator screw | ABS (plastic) |
| 2 | Position indicator | ABS (plastic) |
| 3 | Spring clip | Stainless steel 304 |
| 4 | Washer | Stainless steel 304 |
| 5 | External washer | Engineering plastic |
| 6 | Adjustment screw | Stainless steel 304 |
| 7 | Nut | Stainless steel 304 |
| 8 | Washer | Stainless steel 304 |
| 9 | Body | Extruded aluminum |
| 10 | Piston | Aluminum, die cast |
| 11 | Piston O-ring | NBR |
| 12 | Bearing group | Engineering plastic |
| 13 | End cap O-ring | NBR |
| 14 | End cap | Cast aluminum, polyester coated |
| 15 | Fixing screw | Stainless steel 304 |
| 16 | Internal washer | Engineering plastic |
| 17 | Sealing ring | NBR |
| 18 | Bearing | Engineering plastic |
| 19 | Retainer | Alloy steel |
| 20 | Gear | Alloy steel |
| 21 | Bearing | Engineering plastic |
| 22 | Sealing ring | NBR |
Parts and material sketch of the PA-DA-105-1 pneumatic actuator
Technical parameters of pneumatic valve 4V320-08 220V:
| Name | meaning |
| Type of pneumatic valve | slide valve |
| Working pressure, bar | 1.5 ÷ 1.8 |
| Supply voltage, V | 220 В |
| Total power, Va | 4.5 |
| Control | double-sided electromagnetic |
| Frequency of operation, cycle/sec | 5 |
Pneumatic valve 4V320-08 220V
Dimensions and dimensions of pneumatic valve 4V320-08 220V:
| Pneumatic valve model | 4V320-08 |
| A, mm | 71.9 |
| B, mm | 45 |
| C, mm | 94.4 |
| D, mm | 27 |
| E, mm | 69 |
| F, mm | 40 |
| I, mm | 24 |
| K, mm | 40 |
| L, mm | 188.8 |
| M, mm | 69.4 |
| N, mm | 50 |
| O, mm | 82.4 |
| P, mm | 24 |
| S, mm | 20 |
| T, mm | 6.5 |
| U, mm | 2.4 |
| V, mm | 4 |
| H, mm | 82.4 |
Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V
Technical parameters of limit switch unit APL-210N:
| Name | Value |
| Model of limit switch unit | APL-210N |
| Maximum voltage of limit switch, V | 250 |
| Working environment temperature, °С | -40 to +80 |
| Service life, years | 10 |
Limit switch unit APL-210N
Dimensions and dimensions of the APL-210N limit switch unit:
| Model | Н, mm | L, mm | B, mm | D, mm | D1, mm | M |
| APL-210N | 77 | 112 | 88 | 10 | 5 | 20х1.5 |
Especificaciones
Especificaciones
-
País de origen
-
Apertura de puerto
-
Temperatura máxima permitida
-
Tipo de conexión
-
Entorno operativo
-
Tipo de sello
-
Interruptores de límite
-
Tipo de actuador neumático
Reseñas (0)
Reseñas (0)
Documentation
Documentation
Pago y seguridad
Métodos de pago
Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Preguntas frecuentes
Envío
¿A qué países realizan envíos?
¿A qué países realizan envíos?
Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.
¿Cuánto tiempo tardaré en recibir mi pedido?
¿Cuánto tiempo tardaré en recibir mi pedido?
El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).
Devoluciones y reembolsos
¿Cómo devuelvo un producto?
¿Cómo devuelvo un producto?
Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.
¿Cuánto tiempo tardaré en recibir mi reembolso?
¿Cuánto tiempo tardaré en recibir mi reembolso?
Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.
