Ball valves Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive Elephant PA-SA 052-160 pneumatic distributor 4M310-08 220V BKV APL-510N-EX
Ball valves Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive Elephant PA-SA 052-160 pneumatic distributor 4M310-08 220V BKV APL-510N-EX - DN100 / 16 bar está agotado y se enviará tan pronto como vuelva a estar disponible.
No se ha podido cargar la disponibilidad de recogida
Entrega y envío
Entrega y envío
El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.
Descripción
Descripción
The ball valve is used as a shut-off valve in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) not aggressive to valve materials.
PA-SA pneumatic actuators are designed for automation of control process of industrial shut-off valves - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
Pneumatic actuators 4M310-08 are used for control in pneumatic systems having NAMUR docking surface, for installation of actuators through through holes in the body.
The APL-510N-EX limit switch box is an electrical device designed to open and close the working circuit and to visualize the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of fault detection.
Technical parameters Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive Elephant PA-SA 052-160 pneumatic distributor 4M310-08 220V BKV APL-510N-EX:
| Nominal diameter DN, mm | 15 - 100 |
| Nominal pressure PN, bar | 16 |
| Ambient temperature, ⁰C | from -50 to +200 |
| Tightness in the gate | according to class A of GOST 9544-2015 |
| Working medium | water, steam, oil products and other liquid or gaseous media neutral to the materials used |
| Connection to pipeline | interflange |
| Control type | manual (handle) |
| Ball passage | full bore without constriction |
| Complement | electric or pneumatic actuator can be installed (ISO 5211-2001) |
Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive Elephant PA-SA 052-160 pneumatic distributor 4M310-08 220V BKV APL-510N-EX
Dimensions and dimensions Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive Elephant PA-SA 052-160 pneumatic distributor 4M310-08 220V BKV APL-510N-EX:
| DN | d, mm | D2, mm | D1, mm | D, mm | Т, mm | C, mm | L, mm | L1, mm | H, mm |
| 15 | 15 | 45 | 65 | 95 | 14 | 14 | 42 | 153 | 98 |
| 20 | 20 | 58 | 75 | 105 | 16 | 16 | 48 | 153 | 98 |
| 25 | 25 | 68 | 85 | 115 | 16 | 16 | 50 | 174 | 115 |
| 32 | 32 | 78 | 100 | 140 | 16 | 16 | 60 | 216 | 135 |
| 40 | 36 | 88 | 110 | 150 | 16 | 16 | 65 | 279 | 160 |
| 50 | 46 | 102 | 125 | 165 | 18 | 18 | 80 | 279 | 160 |
| 65 | 58 | 122 | 145 | 185 | 18 | 18 | 110 | 279 | 160 |
| 80 | 73 | 138 | 160 | 200 | 20 | 20 | 120 | 308 | 193 |
| 100 | 90 | 158 | 180 | 220 | 20 | 20 | 150 | 465 | 237 |
Sketch of dimensions and dimensions Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive Elephant PA-SA 052-160 pneumatic distributor 4M310-08 220V BKV APL-510N-EX
Parts and materials table Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive Elephant PA-SA 052-160 pneumatic distributor 4M310-08 220V BKV APL-510N-EX:
| № | Parts | Material |
| 1 | Nut | Steel 304 |
| 2 | Handle | Steel 201+PVC |
| 3 | Washer | Steel 304 |
| 4 | Locking ring | Steel 304 |
| 5 | Thrust washer | Steel 304 |
| 6 | Gland washer | Steel 304 |
| 7 | Gland | PTFE |
| 8 | Stop gasket | PTFE |
| 9 | Rod | Steel 316 |
| 10 | Ball cover | Steel 316 |
| 11 | Ball | Steel 316 |
| 12 | Ball seal | PTFE |
| 13 | Gasket | PTFE |
| 14 | Body | Steel 316 |
Parts and material sketch Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive Elephant PA-SA 052-160 pneumatic distributor 4M310-08 220V BKV APL-510N-EX
Technical data of SA pneumatic actuators
| Design | with return springs |
| Nominal pressure PN, bar | 12 |
| Working pressure, bar | 2...8 |
| Working medium | Filtered compressed air or non-aggressive gases, oils |
| Maximum particle diameter | less than 30 µm2 |
| Operating temperature t, ⁰C | - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air) |
| Adjustment range | ± 5 ° for rotation at 0 ° and 90 ° |
| Manual override | is |
| Position indicator | open/closed |
| Operating environment | indoors and outdoors. (All internal and external parts are anti-corrosion coated) |
Materials of SA pneumatic actuator parts:
| № | Name | Material |
| 1 | Enclosure | extruded aluminum |
| 2 | Side plugs | cast aluminum |
| 3 | Gear | stainless steel |
| 4 | Piston | steel/aluminum |
| 5 | Plugs | stainless steel |
| 6 | Piston ring | NBR |
| 7 | Springs | spring steel |
| 8 | Piston bearing | engineering plastic |
| 9 | Piston ring | NBR |
| 10 | Plug | NBR |
| 11 | Thrust ring | engineering plastic |
| 12 | Ring | engineering plastic |
| 13 | Washer | stainless steel |
| 14 | Spring clip | stainless steel |
| 15 | Indicator | plastic |
| 16 | Indicator housing | plastic |
| 17 | Bearing | engineering plastic |
| 18 | Cam | steel |
| 19 | Bearing | NBR |
| 20 | Bearing | engineering plastic |
| 21 | Bearing | engineering plastic |
| 22 | Sealing ring | NBR |
| 23 | Sealing ring | NBR |
| 24 | Bearing | stainless steel |
| 25 | Adjustment nut | stainless steel |
| 26 | Adjustment screw | stainless steel |
| 27 | Sleeve | aluminum |
Material sketch of SA pneumatic actuator
Technical characteristics of the pneumatic valve 4m310-08 220V:
| Design | spool type |
| Nominal pressure PN, MPa (kg/cm2) | 1,2 (12) |
| Working pressure, bar | 1,5...8 |
| Working medium | filtered compressed air |
| Ambient temperature t, ⁰C | +5 to +50 |
| Response frequency | 5 cycles/s |
| Manual duplication | is |
| Degree of protection | IP 65 |
| Mounting | through holes in the housing |
| Enclosure material | anodized aluminum |
| Response time | 0.05 sec. |
Characteristics of limit switch unit APL-510N-EX:
| Parameter | Significance |
| Enclosure | all-weather IP67/ NEMA4 4X,7,9 explosion-proof E EX d IIC T6 |
| Compatible devices | quarter-turn pneumatic actuators; - any actuators with shaft rotation by 90 |
| Full rotation angle | 90° |
| Cable glands | 2 x NPT 3/4” |
| Electrical connection | screw terminals 8 points (0.08 - 2.5) mm2 |
| Cable gland thread | 2 x NPT 3/4” |
| Type of visual indicator | two-color hemisphere: OPEN (Open) - yellow CLOSED (Closed) - red |
| Switches/sensors | two mechanical switches two proximity sensors |
| Rated voltage, V | 250 |
| Rated current, A | 16 |
| Permissible ambient temperature, °С | от -20 до +66 |
| Average life, cycles | 10 000 000 |
| Weight, kg | 1.8 |
Passports and certificates
Data sheet for Elephant pneumatic valve 4m310-08
Data sheet for Elephant DA/SA-xxx double-acting pneumatic actuator with return springs
Especificaciones
Especificaciones
-
País de origen
-
Apertura de puerto
-
Temperatura máxima permitida
-
Tipo de conexión
-
Entorno operativo
-
Tipo de sello
-
Interruptores de límite
-
Tipo de actuador neumático
Reseñas (0)
Reseñas (0)
Documentation
Documentation
Pago y seguridad
Métodos de pago
Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Preguntas frecuentes
Envío
¿A qué países realizan envíos?
¿A qué países realizan envíos?
Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.
¿Cuánto tiempo tardaré en recibir mi pedido?
¿Cuánto tiempo tardaré en recibir mi pedido?
El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).
Devoluciones y reembolsos
¿Cómo devuelvo un producto?
¿Cómo devuelvo un producto?
Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.
¿Cuánto tiempo tardaré en recibir mi reembolso?
¿Cuánto tiempo tardaré en recibir mi reembolso?
Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.
