Ball valves Elephant BV3232P(4pc)-SP-3WL-T-ISO-H, body material - Stainless steel AISI 316, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON, BPV AFC2000
Ball valves Elephant BV3232P(4pc)-SP-3WL-T-ISO-H, body material - Stainless steel AISI 316, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON, BPV AFC2000 - DN10 / 63 bar está agotado y se enviará tan pronto como vuelva a estar disponible.
No se ha podido cargar la disponibilidad de recogida
Entrega y envío
Entrega y envío
El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.
Descripción
Descripción
The Elephant BV3232P(4pc)-SP-3WL-T-ISO-H ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of BV3232P(4pc)-SP-3WL-T-ISO-H series valves is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the valve materials.
The Elephant PA-DA double-acting pneumatic actuator is designed to automate the process of controlling industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for use both indoors and outdoors. All internal and external parts have an anti-corrosion coating.
Pneumatic distributor Elephant 4V320-10 220V is used to change the direction, start, stop the flow of compressed air in the pneumatic system depending on the external control action.
The Elephant MON manual override with worm gear and HDM reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution to the entire range of manual override tasks.
The AFC2000 air preparation unit is designed to clean compressed air from droplet moisture and solid particles, remove condensate, automatically maintain the pressure at a given level, supply lubricant from the tank to the compressed air flow to the pneumatic system elements with a large range of throughput from 500 liters/minute to 10,000 liters/minute. The lubricator (oil sprayer) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic distributors.
Technical parameters of ball valves Elephant BV3232P(4pc)-SP-3WL-T-ISO-H with double-acting pneumatic actuator PA-DA, pneumatic valve 4V320-10 220V, manual doubler MON, BPV AFC2000:
| Name | Meaning |
| Working environment temperature, °C | from -20 to 200 |
| Type of crane device | three-way |
| Three-way valve type | L |
| Application | water supply, heat supply, steam supply |
| Working environment | water, steam, petroleum products, neutral media |
| Connection to the pipeline | coupling (threaded) |
| Water intake | No |
| Type of flow section | standard pass |
| Control type | With pneumatic drive |
| Joining | Internal thread |
| Control | double acting pneumatic actuator |
| Availability of pneumatic distributor | There is |
Sketch of ball valves Elephant BV3232P(4pc)-SP-3WL-T-ISO-H with double-acting pneumatic actuator PA-DA, pneumatic valve 4V320-10 220V, manual override MON, ball valve AFC2000
Dimensions and sizes of ball valves Elephant BV3232P(4pc)-SP-3WL-T-ISO-H with double-acting pneumatic actuator PA-DA, pneumatic distributor 4V320-10 220V, manual backup MON, BPV AFC2000:
| DN, mm | L, mm | F, mm | L1, mm | E, mm | X, mm | Y, mm |
| 10 | 71 | 98 | 153 | 120 | 88 | 162 |
| 15 | 71 | 98 | 153 | 120 | 88 | 162 |
| 20 | 82 | 98 | 153 | 120 | 88 | 162 |
| 25 | 98 | 98 | 153 | 120 | 88 | 162 |
| 32 | 118 | 98 | 153 | 120 | 88 | 162 |
| 40 | 122 | 115 | 174 | 120 | 88 | 162 |
| 50 | 150 | 115 | 174 | 120 | 88 | 162 |
| 65 | 178 | 135 | 216 | 133 | 88 | 162 |
| 80 | 202 | 135 | 216 | 133 | 88 | 162 |
| 100 | 231 | 135 | 216 | 133 | 88 | 162 |
Sketch of parts and materials of ball valves Elephant BV3232P(4pc)-SP-3WL-T-ISO-H
Table of parts and materials of ball valves Elephant BV3232P(4pc)-SP-3WL-T-ISO-H:
| Item No. | Part name | Material | Quantity |
|---|---|---|---|
| 1 | Lid | SS316 | 3 |
| 2 | Saddle rings | PPL | 4 |
| 3 | Laying the connection | PTFE/RPTFE | 3 |
| 4 | Thrust washer | PTFE/RPTFE | 1 |
| 5 | Sealing | PTFE | 1 |
| 6 | Stock | SS304/SS316 | 1 |
| 7 | Seal | SS304 | 1 |
| 8 | Ball valve | S304/S316 | 1 |
| 9 | Frame | SS316 | 1 |
Technical parameters of the PA-DA double-acting pneumatic actuator:
| Name | Meaning |
| Model | PA-DA |
| Design | double acting |
| Control pressure, bar | 2 ÷ 8 |
| Availability of manual backup | steering wheel |
Sketch of parts and materials of Elephant PA-DA double-acting pneumatic actuator
Table of parts and materials of the pneumatic actuator Elephant PA-DA double acting:
| No. | Name | Material |
| 1 | Frame | extruded aluminum |
| 2 | Side plugs | cast aluminum |
| 3 | Gear | stainless steel |
| 4 | Piston | steel/aluminum |
| 5 | Plugs | stainless steel |
| 6 | Piston ring | NBR |
| 7 | Springs | spring steel |
| 8 | Piston bearing | engineering plastic |
| 9 | Piston ring | NBR |
| 10 | Plug | NBR |
| 11 | Thrust ring | engineering plastic |
| 12 | Ring | engineering plastic |
| 13 | Washer | stainless steel |
| 14 | Spring clamp | stainless steel |
| 15 | Indicator | plastic |
| 16 | Indicator housing | plastic |
| 17 | Bearing | engineering plastic |
| 18 | Cam | steel |
| 19 | Bearing | NBR |
| 20 | Bearing | engineering plastic |
| 21 | Bearing | engineering plastic |
| 22 | Sealing ring | NBR |
| 23 | Sealing ring | NBR |
| 24 | Bearing | stainless steel |
| 25 | Adjusting nut | stainless steel |
| 26 | Adjustment screw | stainless steel |
| 27 | Sleeve | aluminum |
Technical parameters of the Elephant 4V320-10 220V pneumatic valve
| Name | Meaning |
| Type of pneumatic distributor | spool valve |
| Model of pneumatic distributor | 4V320-10 220V |
| Working pressure, bar | 1.5 ÷ 1.8 |
| Supply voltage, V | 220 V |
| Response frequency, cycles/sec | 5 |
Sketch of manual backup Elephant MON
Technical parameters of manual backups Elephant MON:
| Name | Meaning |
| Degree of protection, IP | 67 |
| Connection type | ISO 5211 |
Sketch of parts and materials of manual backup Elephant MON
Table of parts and materials of the manual backup Elephant MON:
| No. | Name | Material |
| 1 | Rod for mounting a pneumatic actuator | Steel 45 |
| 2 | Sealing ring | EPDM |
| 3 | Locking spring | Spring steel |
| 4 | Top end cap | Aluminum alloy |
| 5 | Screw | Steel 304 |
| 6 | Fixing bracket (main rod) | Steel 304 |
| 7 | Frame | Aluminum alloy |
| 8 | Sealing ring | EPDM |
| 9 | Reducer | Cast iron VCh50 |
| 10 | Transition coupling | Cast iron VCh40 |
| 11 | Gearbox rod | Cast iron VCh40 |
Main parameters of the air preparation unit Elephant AFC2000
| Working pressure, bar | 8 |
| Maximum pressure, bar | 10 |
| Adjustable pressure range, bar | 0.5 ÷ 9 |
| Destruction pressure, bar | 15 |
| Air connection | 1/4" |
| Operating temperature, C | from -5 to +60 |
| Size of filtered particles, µm | 40 |
| Oil viscosity | ISO VG 32 |
| Weight, kg | 0.395 |
| Kit composition | filter-moisture separator, pressure regulator, lubricator, bracket |
Especificaciones
Especificaciones
-
País de origen
-
Temperatura máxima permitida
-
Tipo de conexión
-
Entorno operativo
-
Tipo de sello
-
Material de bloqueo
-
Anulación manual
-
Tipo de actuador neumático
Reseñas (0)
Reseñas (0)
Documentation
Documentation
Pago y seguridad
Métodos de pago
Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Preguntas frecuentes
Envío
¿A qué países realizan envíos?
¿A qué países realizan envíos?
Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.
¿Cuánto tiempo tardaré en recibir mi pedido?
¿Cuánto tiempo tardaré en recibir mi pedido?
El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).
Devoluciones y reembolsos
¿Cómo devuelvo un producto?
¿Cómo devuelvo un producto?
Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.
¿Cuánto tiempo tardaré en recibir mi reembolso?
¿Cuánto tiempo tardaré en recibir mi reembolso?
Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.
