Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H, body material - Stainless steel AISI 316, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON
Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H, body material - Stainless steel AISI 316, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON - DN10 / 63 bar está agotado y se enviará tan pronto como vuelva a estar disponible.
No se ha podido cargar la disponibilidad de recogida
Entrega y envío
Entrega y envío
El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.
Descripción
Descripción
Ball valve Elephant BV3232P(3pc)-FP-W-ISO-H RU63/40/25 is used as shut-off valves in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of the BV3232P(3pc)-FP-W-ISO-H Ru63/40/25 series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.
The Elephant PA-DA double-acting pneumatic actuator is designed to automate the process of controlling industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for use both indoors and outdoors. All internal and external parts have an anti-corrosion coating.
Pneumatic distributor Elephant 4V320-10 220V is used to change the direction, start, stop the flow of compressed air in the pneumatic system depending on the external control action.
The Elephant MON manual override with worm gear and HDM reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution to the entire range of manual override tasks.
Technical parameters of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Rou63/40/25 c pneumatic actuator PA-DA double-acting, pneumatic valve 4V320-10 220V, manual doubler MON:
| Name | Meaning |
| Working environment temperature, °C | from -20 to 200 |
| Type of crane device | two-way |
| Application | water supply, heat supply, steam supply |
| Working environment | water, steam, petroleum products, neutral media |
| Connection to the pipeline | for welding |
| Water intake | No |
| Type of flow section | full bore |
| Control type | With pneumatic drive |
| Joining | for welding |
| Control | double acting pneumatic actuator |
| Availability of pneumatic distributor | There is |
Sketch of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Ru63/40/25 with double-acting pneumatic actuator PA-DA, pneumatic valve 4V320-10 220V, manual doubler MON
Dimensions and dimensions of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Ru63/40/25 c pneumatic actuator PA-DA double-acting, pneumatic valve 4V320-10 220V, manual doubler MON:
| DN, mm | L, mm | D, mm | F, mm | L1, mm | E, mm |
| 10 | 63 | 17.2 | 98 | 153 | 120 |
| 15 | 65 | 21.3 | 98 | 153 | 120 |
| 20 | 75 | 26.7 | 98 | 153 | 120 |
| 25 | 83 | 33.5 | 98 | 153 | 120 |
| 32 | 98 | 42.2 | 115 | 174 | 120 |
| 40 | 112 | 48.3 | 135 | 216 | 133 |
| 50 | 135 | 60.5 | 135 | 216 | 133 |
| 65 | 175 | 73.2 | 135 | 216 | 133 |
| 80 | 198 | 88.9 | 160 | 279 | 180 |
| 100 | 246 | 114.3 | 160 | 279 | 180 |
Sketch of details and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Rou63/40/25
Table of parts and materials for ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Rou63/40/25:
| Item No. | Part name | Material |
| 1 | Frame | SS316 |
| 2 | Ball valve | S304/S316 |
| 3 | Bolt | S201/S304 |
| 4 | screw | S201/S304 |
| 5 | Sealing | PTFE |
| 6 | Stock | SS304/SS316 |
| 7 | Seal | S201/S304 |
| 8 | Sealing ring | VITON |
| 9 | Lid | WCB/CF8/CF8M |
| 10 | Saddle rings | PPL |
| 11 | Thrust washer | PTFE |
Technical parameters of the PA-DA double-acting pneumatic actuator:
| Name | Meaning |
| Model | PA-DA |
| Design | double acting |
| Control pressure, bar | 2 ÷ 8 |
| Availability of manual backup | steering wheel |
Sketch of parts and materials of Elephant PA-DA double-acting pneumatic actuator
Parts and materials table for double-acting pneumatic actuator Elephant PA-DA:
| No. | Name | Material |
| 1 | Frame | extruded aluminum |
| 2 | Side plugs | cast aluminum |
| 3 | Gear | stainless steel |
| 4 | Piston | steel/aluminum |
| 5 | Plugs | stainless steel |
| 6 | Piston ring | NBR |
| 7 | Springs | spring steel |
| 8 | Piston bearing | engineering plastic |
| 9 | Piston ring | NBR |
| 10 | Plug | NBR |
| 11 | Thrust ring | engineering plastic |
| 12 | Ring | engineering plastic |
| 13 | Washer | stainless steel |
| 14 | Spring clamp | stainless steel |
| 15 | Indicator | plastic |
| 16 | Indicator housing | plastic |
| 17 | Bearing | engineering plastic |
| 18 | Cam | steel |
| 19 | Bearing | NBR |
| 20 | Bearing | engineering plastic |
| 21 | Bearing | engineering plastic |
| 22 | Sealing ring | NBR |
| 23 | Sealing ring | NBR |
| 24 | Bearing | stainless steel |
| 25 | Adjusting nut | stainless steel |
| 26 | Adjustment screw | stainless steel |
| 27 | Sleeve | aluminum |
Technical parameters of the Elephant 4V320-10 220V pneumatic valve
| Name | Meaning |
| Type of pneumatic distributor | spool valve |
| Model of pneumatic distributor | 4V320-10 220V |
| Working pressure, bar | 1.5 ÷ 1.8 |
| Supply voltage, V | 220 V |
| Response frequency, cycles/sec | 5 |
Sketch of manual backup Elephant MON
Technical parameters of manual backups Elephant MON:
| Name | Meaning |
| Degree of protection, IP | 67 |
| Connection type | ISO 5211 |
Sketch of parts and materials of manual backup Elephant MON
Table of parts and materials of the manual backup Elephant MON:
| No. | Name | Material |
| 1 | Rod for mounting a pneumatic actuator | Steel 45 |
| 2 | Sealing ring | EPDM |
| 3 | Locking spring | Spring steel |
| 4 | Top end cap | Aluminum alloy |
| 5 | Screw | Steel 304 |
| 6 | Fixing bracket (main rod) | Steel 304 |
| 7 | Frame | Aluminum alloy |
| 8 | Sealing ring | EPDM |
| 9 | Reducer | Cast iron VCh50 |
| 10 | Transition coupling | Cast iron VCh40 |
| 11 | Gearbox rod | Cast iron VCh40 |
Especificaciones
Especificaciones
-
País de origen
-
Temperatura máxima permitida
-
Tipo de conexión
-
Entorno operativo
-
Tipo de sello
-
Material de bloqueo
-
Anulación manual
-
Tipo de actuador neumático
Reseñas (0)
Reseñas (0)
Documentation
Documentation
Pago y seguridad
Métodos de pago
Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Preguntas frecuentes
Envío
¿A qué países realizan envíos?
¿A qué países realizan envíos?
Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.
¿Cuánto tiempo tardaré en recibir mi pedido?
¿Cuánto tiempo tardaré en recibir mi pedido?
El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).
Devoluciones y reembolsos
¿Cómo devuelvo un producto?
¿Cómo devuelvo un producto?
Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.
¿Cuánto tiempo tardaré en recibir mi reembolso?
¿Cuánto tiempo tardaré en recibir mi reembolso?
Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.
