Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 full bore, – Valve Elephant
Elephant  |  SKU: D160-52108

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 full bore, body - stainless steel 316, for welding, with pneumatic actuator PA-DA, pneumatic distributor 4V320-08 220V, BKV APL-410N EX and GSV AFC2000

€292,76
inkl. MwSt. Versand wird beim Checkout berechnet.

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 full bore, body - stainless steel 316, for welding, with pneumatic actuator PA-DA, pneumatic distributor 4V320-08 220V, BKV APL-410N EX and GSV AFC2000 - DN10 / 63 bar ist auf Lager und wird versandt, sobald es wieder verfügbar ist

Lieferung und Versand

Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.

Wenn Sie Fragen zu unseren Produkten, Lieferoptionen oder anderen Themen haben, zögern Sie nicht, uns zu kontaktieren.

Beschreibung

The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.

Pneumatic actuators Elephant double-acting rotary PA-DA-XXX are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.

The pneumatic distributor is used to change the direction, start, and stop the flow of compressed air in a pneumatic system depending on the external control action.

The limit switch unit is designed for visual and electrical signaling of the end positions of the shut-off element of the valve: valve, tap or butterfly valve. It is installed on top of the surface of the pneumatic drive and connected to the DIN standard drive shaft. In a sealed box, as a rule, there are two sensors that monitor the position of the drive shaft and signal in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. Visual indication of the position can be seen on the body of the unit there is a 3D visual indicator RED - CLOSED and GREEN - OPEN.

The air preparation unit is designed to clean compressed air from droplet moisture and solid particles, remove condensate, automatically maintain pressure at a given level, and supply lubricant from the reservoir to the compressed air flow to the elements of the pneumatic system.

 

 

Technical parameters of Elephant BV3232P(3pc)-FP-W-ISO-H LONG ball valves DN10-150 PN16-63 full bore, body - stainless steel 316, for welding, with PA-DA pneumatic actuator, 4V320-08 220V pneumatic distributor, APL-410N EX BKV and AFC2000 BPV:

Name Meaning
Working environment temperature, °C from -20 to 180
Type of crane device two-way
Application water supply, heat supply, industry
Working environment water, steam, petroleum products, neutral media, gaseous media
Connection to the pipeline for welding
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining for welding
Control double acting pneumatic actuator
Availability of limit switches There is
Availability of pneumatic distributor There is
Availability of electropneumatic positioner No
Average service life, years 5
Warranty, g. 1

 

 

Sketch of the overall dimensions and sizes of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 PN16-63 full bore, body - stainless steel 316, for welding, with pneumatic actuator PA-DA, pneumatic distributor 4V320-08 220V, BKV APL-410N EX and BPV AFC2000


Dimensions and sizes of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 PN16-63 full bore, body - stainless steel 316, for welding, with pneumatic actuator PA-DA, pneumatic distributor 4V320-08 220V, BKV APL-410N EX and BPV AFC2000:

Model L, mm A, mm E, mm I, mm B, mm C, mm
DN10 130 153 72 162 88 139
DN15 150 153 72 162 88 139
DN20 155 174 89 162 88 139
DN25 186 216 109 162 88 139
DN32 195 153 72 162 88 139
DN40 231 174 89 162 88 139
DN50 243 216 109 162 88 139
DN65 290 216 109 162 88 139
DN80 302 216 109 162 88 139
DN100 326 279 134 162 88 139
DN125 360 308 157 162 88 139
DN150 390 405 174 162 88 139

 

Sketch of parts and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 РN16-63 full bore, body - stainless steel 316, for welding, with pneumatic actuator PA-DA, pneumatic distributor 4V320-08 220V, BKV APL-410N EX and BPV AFC2000

 


Table of parts and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG DN10-150 PN16-63 full bore, body - stainless steel 316, for welding, with pneumatic actuator PA-DA, pneumatic distributor 4V320-08 220V, BKV APL-410N EX and BPV AFC2000:

Item No. Part name Material
1 Frame stainless steel 316
2 Side element (2 pcs) stainless steel 316
3 Ball stainless steel 316
4 Ball seal PTFE
5 Rod seal PTFE
6 Sleeve stainless steel 304
7 Stock stainless steel 316
8 Washer stainless steel
9 screw steel A2-70
10 Bolt steel A2-70

 

 

Pneumatic drive Elephant

 


Technical parameters of the pneumatic drive Elephant

Name Meaning
Design double acting
Control pressure, bar 2 ÷ 8

 

 

Sketch of the dimensions and sizes of the pneumatic drive Elephant

 

Dimensions and sizes of the pneumatic drive Elephant:

Model PA-DA-52 PA-DA-65 PA-DA-83 PA-DA-105 PA-DA-130 PA-DA-140
A1, mm 108 125 152 189 210 268
B1, mm 153 174 216 279 308 405
C, mm 30 36 46 55 67.5 76
D, mm 41 46 55 64 70 77
E, mm 72 89 109 134 157 174
F, mm 26 26 26 26 36 36
G, mm 15 15 15 25 25 30
H, mm F03 F05 F05 F07 F07 F10
I, mm F05 F07 F07 F10 F10 F12
J, mm 4-M5x8 4-M6x10 4-M6x10 4-M8x12 4-M8x12 4-M10x16
K, mm 4-M6x10 4-M8x12 4-M8x12 4-M10x16 4-M10x16 4-M12x20
L, mm 11x11 14x14 17x17 22x22 22x22 27x27
Mmm 80 80 80 80 80 130
N, mm 30 30 30 30 30 30
F0, mm 34 34 34 41 62 62
R, mm 20 20 20 20 30 30

 

 

Table of parts and materials of pneumatic drive Elephant:

No. Name Quantity Material Coating
1 Frame 1 extruded aluminum hard anodized
2 Side plugs 2 cast aluminum
3 Gear 1 stainless steel nickel plated
4 Piston 2 steel/aluminum oxidation/galvanic zinc plating
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel epoxy coating
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clamp 2 stainless steel
15 Indicator 1 plastic
16 Indicator housing 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel oxidation/galvanic zinc plating
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 Sealing ring 2 NBR
23 Sealing ring 2 NBR
24 Bearing 2 stainless steel
25 Adjusting nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Sleeve 2 aluminum

 

 

Pneumatic distributor Elephant 4V320-08 220V

 

Technical parameters of pneumatic distributors Elephant 4V320-08 220V

Name Meaning
Type of pneumatic distributor spool valve
Model of pneumatic distributor 4V320-08 220V
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220V
Response frequency, cycles/sec 5



Sketch of dimensions and sizes of pneumatic distributors Elephant 4V320-08 220V

 

Dimensions and sizes of pneumatic distributors Elephant 4V320-08 220V

Model of pneumatic distributor 4V320-08
A, mm 71.9
B, mm 45
C, mm 94.4
D, mm 27
E, mm 69
F, mm 40
I, mm 24
K, mm 40
L, mm 188.8
M, mm 69.4
N, mm 50
O, mm 82.4
P, mm 24
S, mm 20
T, mm 6.5
U, mm 2.4
V, mm 4
H, mm 82.4

 

 

Limit Switch Block Elephant APL-410N EX

 

Technical parameters of the limit switch unit Elephant APL-410N EX

Name Meaning
Limit switch block model APL-410N EX
Ambient temperature, °C from -25 to 80
Service life, years 10

 

 

Sketch of the dimensions and sizes of the limit switch block Elephant APL-510N EX

 

 

Dimensions and sizes of the limit switch unit Elephant APL-410N EX:

Model APL-410N EX
A, mm 177
B, mm 174
C, mm 178
D, mm 101
E, mm 76
F, mm 57
G, mm 55
H, mm 23
I, mm 27
J, mm 3
K, mm 4
Ød1, mm Ø5
Ød2, mm Ø9.5

  

 

Sketch of parts and materials of the limit switch block Elephant APL-410N EX

 

 

Table of parts and materials of the limit switch block Elephant APL-410N EX

Item No. Detail Material
1 Visual indicator ABS plastic / polycarbonate
2 Visual indicator cover polycarbonate
3 Label
4 Cover screws stainless steel
5 BKV housing cover aluminum die casting
6 Shaft stainless steel
7 Limit switches
8 Cams (eccentrics) polycarbonate
9 BKV case aluminum die casting
10 Terminal block
11 Ground terminal stainless steel
12 Hole (thread) for cable entry
13 bracket stainless steel

 

 

Air preparation unit Elephant AFC2000

 

Technical parameters of the air preparation unit Elephant AFC2000

Name Meaning
Working pressure, bar 8
Adjustable pressure range, bar 0.5 ÷ 9
Size of filtered particles, µm 40 microns
Weight, kg 0.395

 

 

Sketch of the dimensions and sizes of the air preparation unit Elephant AFC2000

 

Dimensions and sizes of the air preparation unit Elephant AFC2000:

Model BPV AFC2000
A, mm 162
B, mm 88
C, mm 139
D, mm 31
E, mm 53.5
F, mm 12
G, mm 8
H, mm 7
I, mm 13.3
J, mm 39
K, mm 5
L, mm 40
M, mm 32
N, mm 53
O, mm 29
P, mm 6
R, mm 41.5

Spezifikation
  • Country of origin
    China
  • Port opening
    full bore
  • Body material
    Stainless steel AISI 316
  • Maximum allowable temperature
    180 °C
  • Connection type
    For welding
  • Control type
    Pneumatically actuated
  • Operating environment
    water, steam, petroleum products, neutral media, gaseous media
  • Type of seal
    PTFE
  • Voltage
    220V
  • Explosion-proof
    have
  • Torque
    3 Nm
  • Limit switches
    have
  • Type of pneumatic actuator
    double action

Bewertungen (0)

Documentation
nullData sheet for limit switch unit Elephant APL-410N EX

Zahlung & Sicherheit

Zahlungsmethoden

    Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite

    Verfügbare Varianten

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-52108DN1063 bar €292,76 0 in stock
    D160-52109DN10025 bar €1.195,97 0 in stock
    D160-52110DN12516 bar €2.173,55 0 in stock
    D160-52111DN1563 bar €292,76 0 in stock
    D160-52112DN15016 bar €3.102,46 0 in stock
    D160-52113DN2063 bar €352,00 0 in stock
    D160-52114DN2563 bar €357,84 0 in stock
    D160-52115DN3263 bar €360,41 0 in stock
    D160-52116DN4040 bar €414,87 0 in stock
    D160-52117DN5040 bar €492,37 0 in stock
    D160-52118DN6525 bar €675,95 0 in stock
    D160-52119DN8025 bar €831,49 0 in stock

    Häufig gestellte Fragen

    Versand

    In welche Länder liefern Sie?

    Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.

    Wie lange dauert es, bis ich meine Bestellung erhalte?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).