Ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, fla – Valve Elephant
1 9
Elephant  |  SKU: D160-43347

Ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, s mon/drive PA-DA, mon/distribution 4M310-08 24V, LSU APL-410N EX, backup MON3-700-T38-ISO and ATU A

€4.023,64
Tax included Shipping calculated at checkout.

Ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, s mon/drive PA-DA, mon/distribution 4M310-08 24V, LSU APL-410N EX, backup MON3-700-T38-ISO and ATU A - DN100 / 16 bar is backordered and will ship as soon as it is back in stock.

Delivery and Shipping

The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.

If you have any questions about our products, delivery options, or anything else, feel free to reach out.

Description

The ball valve is used as a shut-off valve, as well as for mixing and separation of medium flows in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) that are not aggressive to valve materials.

Pneumatic actuators Elephant double-acting rotary actuators PA-DA are designed to automate the process of controlling industrial valves with maximum torque up to 2128 Nm.

 

 

Technical parameters of ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19

Parameter Value
Nominal Pressure PN, bar 16
Operating Medium Temperature, °C from -25 to 180
Valve Type Three-way
Three-Way Valve Type L
Application Water supply, Heating
Working Medium Water, Steam, Petroleum products, Neutral media, Gaseous media
Pipeline Connection Flanged
Water Draw-Off No
Bore Type Full bore
Tightness Class A
Control Type With pneumatic actuator
Connection Type Flanged
Actuation Double-acting pneumatic actuator
Limit Switches Yes
Pneumatic Valve Yes
Electropneumatic Positioner No
Average Service Life, years 10
Warranty, years 1
Country of Manufacture China

 

 

Dimensions and dimensions of ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19

DN d, mm d1, mm k, mm D, mm L, mm H, mm W, mm T, mm
15 15 45 65 95 150 72 150 14
20 18 58 75 105 160 77 190 14
25 25 64 85 115 180 82 190 14
32 32 78 100 140 200 100 215 16
40 38 88 110 150 220 108 215 16
50 49 99 125 165 240 125 250 18
65 65 122 145 185 260 144 250 18
80 80 138 160 200 280 160 300 20
100 100 158 180 220 325 187 300 20

 

DN D1, mm D2, mm D3, mm D4, mm SxS, mm N – Z, mm ISO 5211 Weight, kg
15 5,5 6 36 42 9х9 4 –14 F03/F04 3,5
20 6,0 7 42 50 11х11 4 –14 F04/F05 4,5
25 6,0 7 42 50 11х11 4 –14 F04/F05 5,6
32 7,0 9 50 70 14х14 4 –18 F05/F07 9,3
40 7,0 9 50 70 14х14 4 –18 F05/F07 11,65
50 9,0 11 70 102 17х17 4 –18 F07/F10 17,95
65 9,0 11 70 102 17х17 4 –18 F07/F10 26,5
80 9,0 11 70 102 19х19 8 –18 F07/F10 39,1
100 11,0 13 102 125 19х19 8 –18 F10/F12 58,5


Sketch dimensions and dimensions of ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19

 

 

Table of parts and materials for ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19

№ Part Name Material
1 Body Stainless Steel SS316
2 Ball Stainless Steel SS316
3 Seal PTFE
4 Body Cover Stainless Steel SS316
5 Bolt Stainless Steel SS304
6 Gasket PTFE
7 Nut Stainless Steel SS304
8 Gasket PTFE
9 Stem Seal PTFE
10 Bolt Stainless Steel SS304
11 Packing Stainless Steel SS304

Parts and materials sketch for ball valves Elephant BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19

 

 

Technical data of DA double-acting pneumatic actuators:

Type of pneumatic actuator DA - double-acting
Nominal pressure PN, bar 12
Working pressure, bar 2...8
Working medium filtered compressed air
Maximum particle diameter of the working medium, µm2 ≤30
Ambient temperature, ⁰C -20 to +80
Swivel angle, ° 0 - 90
Swivel angle adjustment, % ±5
Position indicator open/closed
Top connection standard NAMUR
Air connection standard NAMUR
Average life, cycles closed/open 70 000 (for non-aggressive media and medium pressure and temperature values)


DA pneumatic actuators double-acting rotary actuators

 


Dimensions and mounting dimensions of DA double-acting pneumatic actuators:

Model A, mm B, mm C, mm D, mm E, mm F, mm G, mm H, mm
DA-052 30 41,5 65,5 72 92 65 30 80
DA-065 36 47 81 88 108 72 30 80
DA-083 46 57 98,5 108,7 128,7 92 30 80
DA-105 57,5 64 122,5 133 153 109,5 30 80
DA-130 67,5 74,5 145,5 155 185 127,5 30 130
DA-140 75 77 161 172 202 137,5 30 130
DA-160 87 87 184 197 227 159 30 130
DA-210 113 113 235,5 255 285 210 30 130
DA-270 147 147 299 326 356 273 30 130
DA-300 162 174 330 350 380 312 30 130
DA-350 190 195 483 410 440 365 30 130

 

Model I, mm J, mm M, mm N, mm Z, mm d, mm K L
DA-052 36 50 11x11 14 147 40 M5x8 M6x10
DA-065 50 70 14x14 18 168 40 M6x10 M8x13
DA-083 50 70 17x17 21 204 40 M6x10 M8x13
DA-105 70 102 22x22 26 268 40 M8x13 M10x16
DA-130 70 102 22x22 26 301 55 M8x13 M10x16
DA-140 102 125 27x27 31 390 55 M10x16 M12x20
DA-160 102 125 27x27 31 458 55 M10x16 M12x20
DA-210 - 140 36x36 40 532 80 - M16x25
DA-270 - 165 46x46 50 718 80 - M20x25
DA-300 - 165 46x46 50 760 80 - M20x25
DA-350 165 254 46x46 50 920 80 M20x25 8xM16x25

Sketch of dimensions of DA double-acting pneumatic actuators

 

 

Materials of parts for DA double-acting pneumatic actuators:

№ Part name Material
1 Indicator screw ABS plastic
2 Position indicator ABS plastic
3 Spring clip stainless steel 304
4 Metal washer stainless steel 304
5 Pressure washer engineering plastic
6 Housing hard anodized extruded aluminum alloy
7 Pressure washer engineering plastic
8 Limiter alloy steel
9 Shaft sealing ring upper NBR
10 Upper shaft sliding ring engineering plastic
11 Shaft nickel plated alloy steel
12 Shaft sliding ring lower engineering plastic
13 Shaft O-ring lower NBR
14 Plug NBR
15 Seal ring of adjusting screws NBR
16 Washer of adjusting screw stainless steel 304
17 Lock nut of adjusting screw stainless steel 304
18 Adjusting screw stainless steel 304
19 Piston die-cast aluminum alloy
20 Piston guide plate engineering plastic
21 Piston sliding ring engineering plastic
22 Piston O-ring NBR
23 Spring set spring steel
24 Cover O-ring NBR
25 End cap cast aluminum with polyester coating
26 Cover screw stainless steel 304
27 Stop screw stainless steel 304
28 Adapter carbon steel

Material sketch of DA double-acting pneumatic actuators

 

 

Technical characteristics of the pneumatic distributor 4M310-08 NAMUR

Design Spool-type
Test pressure (body strength test. Not for operation!), bar 10
Working pressure (recommended range for normal operation), bar 1.5 ÷ 8
Valve type 5/2 five-port, two-position
Working medium purified air (40 µm filter fineness)
Operating temperature, °C 0 to +60
Actuation frequency 5 cycles per second
Manual override yes
Protection rating/insulation class IP65/F
Connection to pneumatic actuator NAMUR-compliant mounting surface (VDI/VDE3845)
Body material anodized aluminum
Effective cross-sectional area, mm2 25 (Cv = 1.4)
Exhaust port dimensions (vent to atmosphere) 2 - PT1/4”
Air inlet port size (to pneumatic valve) G1/4”
Air outlet port size (to pneumatic actuator) 2 x Ø19.2 mm
Response time, sec 0.05
Supply voltage, V 220AC/24DC
Coil power 220VAC – 5.5 VA/24VDC – 4.8 W
Weight, kg 0.35
Average service life, cycles 10,000,000

 

 

Overall and installation dimensions of the pneumatic distributor 4M310-08 NAMUR

A C D E F G H I K L J N M
mm
40 24 28 32 40 21,5 69 45 17,5 135 29,3 40 27

Sketch of the dimensions of the pneumatic distributor 4M310-08 NAMUR

 

 

Basic materials and parts of the pneumatic distributor 4M310-08 NAMUR

№ Part Name Material
1 Connector Engineering plastic
2 Nut POM + carbon steel
3 Coil Copper
4 Control Elements —
5 Plate Carbon steel
6 Piston POM
7 Control Valve Seat Engineering plastic
8 Valve Body Aluminum alloy
9 Spool Aluminum alloy
10 O-Ring Seal HNBR
11 Rear Cover Engineering plastic
12 Filter Synthetic material
13 Piston POM
14 Spring Stainless steel
15 Manual Override Engineering plastic
16 Rear Seat Aluminum alloy
17 Spring Seat Aluminum alloy
18 Type C Towing Shackle 65Mn

Sketch of the dimensions of the pneumatic distributor 4M310-08 NAMUR

 

 

Technical parameters of Elephant handwheels

Name Value
Manual Override Model MON1-250-T26-ISO, MON2-450-T28-ISO, MON3-700-T38-ISO
Climatic Version U, UHL, T, OM
Mounting Method Horizontal/Vertical
Protection Degree, IP 67
Connection Type ISO 5211

 

 

Dimensions and dimensions of Elephant handwheels

Model MON1-250-T26-ISO MON2-450-T28-ISO MON3-700-T38-ISO
b1, mm 14 17 22
N, mm 22 22 28
b2, mm 14 17 22
M, mm 16 18 22
D1, mm Ø50 Ø70 Ø102
4-M1, mm 4-M6 4-M8 4-M10
D2, mm Ø70 Ø102 Ø125
4-M2, mm 4-M8 4-M10 4-M12
E, mm 70×70 95×95 114×114
D3, mm Ø50 Ø70 Ø102
4-Ø1, mm 4-Ø6.5 4-Ø8.5 4-Ø10.5
D4, mm Ø70 Ø102 Ø125
4-Ø2, mm 4-Ø8.5 4-Ø10.5 4-Ø12.5
A, mm 90 125 140
B, mm 55 64 71
ØC, mm Ø88 Ø110 Ø129
F, mm 115 135 166
T, mm 44 62.5 70
Y, mm 145 178 212
H, mm 120 133 180
S, mm 53 56.5 68.7
K, mm 10 13 12.5
Ø Handwheel, mm 180 200 280

Sketch of dimensions and dimensions of Elephant handwheels

 

 

Parts and materials table for handwheels Elephant

№ Part Name Material
1 Shaft for pneumatic actuator mounting Steel 45
2, 8 O-ring EPDM
3 Retaining spring Spring steel
4 Upper end cover Aluminum alloy
5 Screw Steel 304
6 Retaining clip (main link) Steel 304
7 Housing Aluminum alloy
9 Gearbox Cast iron
10 Adapter coupling Cast iron
11 Gearbox shaft Cast iron
Sketch of parts and materials of manual doublers Elephant




Technical parameters of limit switch units Elephant APL-410N EX

Name Value
Limit Switch Box Model APL-410N EX
Enclosure Protection Rating, IP 65
Service Life, years 10

 

 

Dimensions and dimensions of Elephant APL-410N EX limit switch units

Model D, mm D1, mm H, mm L, mm B, mm M, mm
APL-410N EX 9.5 5 174 177 178 8

Sketch of dimensions and dimensions of Elephant APL-410N EX limit switch units

 

 

Technical parameters of Elephant AFC2000 air treatment units

Name Value
Working Pressure, bar 8
Adjustable Pressure Range, bar 0.5 ÷ 9
Filtered Particle Size, μm 40 μm
Weight, kg 0.395

 

 

Dimensions and dimensions of Elephant AFC2000 air treatment units

Model AFC2000
A, mm 162
B, mm 88
C, mm 139
D, mm 31
E, mm 53.5
F, mm 12
G, mm 8
H, mm 7
I, mm 13.3
J, mm 39
K, mm 5
L, mm 40
M, mm 32
N, mm 53
O, mm 29
P, mm 6
R, mm 41.5
Sketch of dimensions and dimensions of air treatment units Elephant AFC2000

Specifications
  • Country of origin
    China
  • Port opening
    full bore
  • Body material
    Stainless steel AISI 316
  • Maximum allowable temperature
    180 °C
  • Connection type
    Flanged
  • Control type
    Pneumatically actuated
  • Operating environment
    Water, Steam, Petroleum Products, Neutral Media, Gaseous Media
  • Type of seal
    PTFE
  • Voltage
    24 V
  • Explosion-proof
    have
  • Torque
    157 Nm
  • Limit switches
    have
  • Type of pneumatic actuator
    double action

Reviews (0)

Documentation
nullAir treatment unit AFC2000 ELEPHANT
nullData sheet for limit switch unit Elephant APL-410N EX
nullPneumatic valve ELEPHANT 4M310-08 spool type
nullBall valve ELEPHANT BV32xP 4pc -SP-3x-T-ISO-H
nullHandwheel ELEPHANT MONx-x-x-ISO for pneumatic actuators and quarter-turn valves
nullBall valve ELEPHANT BV3232P 4pc -FP-3x-F-ISO-H

Payment & Security

Payment methods

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Available Variants

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-43347DN10016 bar €4.023,64 0 In stock
    D160-42131DN1516 bar €779,89 Sold out
    D160-42283DN2016 bar €821,99 Sold out
    D160-42435DN2516 bar €924,82 Sold out
    D160-42587DN3216 bar €858,87 Sold out
    D160-42739DN4016 bar €1.171,68 Sold out
    D160-42891DN5016 bar €1.144,01 Sold out
    D160-43043DN6516 bar €2.064,36 Sold out
    D160-43195DN8016 bar €2.790,05 Sold out

    Frequently Asked Questions

    Shipping

    What countries do you ship to?

    We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.

    How long will it take to receive my order?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).