Water Butterfly valves Elephant WBV0232E-2W-Fb-H DN25-32 16 bar, body - aluminum alloy, disc - stainless steel 316L, seal - EPDM
Water Butterfly valves Elephant WBV0232E-2W-Fb-H DN25-32 16 bar, body - aluminum alloy, disc - stainless steel 316L, seal - EPDM - DN25 / 16 bar is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.
Description
Description
Butterfly valves are designed for use as shut-off or control valves to control flow in heat supply systems, water supply systems, and in industrial processes in the food, chemical, oil and gas, pulp and paper, and other industries. Operating principle: The valves open and close by rotating the disk 90°. Opening is accomplished by turning the handle or gearbox handwheel counterclockwise, and closing is accomplished clockwise.
PA-x-x pneumatic actuators are designed to automate the control of quarter-turn valves. PA-DA-x double-acting pneumatic actuators use two ports to supply the control fluid and create movement in both directions, both opening and closing the valve. One port is used to move the piston in one direction, and the other to move it in the opposite direction.
A pneumatic distributor is used to change the direction, start, and stop compressed air flow in a pneumatic system depending on an external control signal. The Elephant ALS200D magnetic switch is designed to convert the final values of the shaft position of pneumatic drives or shut-off valves into electrical signals.
Technical characteristics of rotary disc valves Elephant WBV0232E-2W-Fb-H DN25-32 16 bar, body - aluminum alloy, disc - stainless steel 316L, seal - EPDM
| Characteristics | Value |
| Valve Type | Rotary disc |
| Diameter | 25-32 mm |
| Nominal Pressure | 16 bar |
| Working Medium Temperature | -20 to +120°C |
| Application | Water supply, heat supply, Chemical industry, Oil and gas industry, Food industry, Pulp and paper industry |
| Connection Type | Wafer |
| Control Type | Pneumatic actuator |
| Country of Origin | China |
| Warranty | 12 months |
Technical characteristics of Elephant double-acting rotary pneumatic actuators PA-DA-XXX
| Characteristics | Value |
| Pneumatic drive type | double acting |
| Nominal pressure | 12 bar |
| Working pressure | 2...8 bar |
| Maximum particle diameter | less than 30 µm2 |
| Working medium | filtered compressed air or non-aggressive gases, oils |
| Adjustment range | ± 5° for rotation at 0° and 90° |
| Working medium temperature | from -20 to +80 °C |
Technical characteristics of pneumatic valves Elephant 4V320-10 220V
| Characteristics | Value |
| Pneumatic valve model | 4V320-10 220V |
| Supply voltage | 220V |
| Pneumatic valve type | spool |
| Nominal pressure | 12 bar |
| Working pressure | 1.5 ÷ 8 bar |
| Ambient temperature | from -5 to +50 ⁰C |
| Working medium | purified air (40 µm filtering fineness) |
| Response frequency | 5 cycles/s |
| Protection rating | IP65 |
| Control | two-way electromagnetic |
| Housing material | aluminum alloy and technopolymer |
| Response time | 0.05 s |
| Working channel diameter | 3/8" |
Technical specifications of the Elephant ALS200D magnetic switch
| Characteristics | Value |
| Housing Material | PP-GF30 plastic |
| Housing Protection Rating | IP67 |
| Compatible Devices | pneumatic actuators, any actuators with 90° shaft rotation |
| Shaft Angle Indicator | 0-90° |
| Contact Type | NO |
| Sensor Interaction Type | magnetic |
| Sensor Interaction Distance | 1÷6 mm |
| On/Off Switching Frequency | 0÷4.8 kHz |
| Visual Indication | two LEDs |
| Rated Voltage | 5÷240V AC/DC |
| Rated Current | 0÷300 mA |
| Rated Power | 10 W |
| Ambient Temperature | from -40 to +85 °C |
| Cable Terminal | 4 wires (2 wires/break, 2 wires/close) |
| Weight | 0.14 kg |
| Warranty | 12 months |
| Service Life | 10 years |
Overall and installation dimensions of butterfly valves Elephant WBV0232E-2W-Fb-H DN25-32 16 bar, body - aluminum alloy, disc - stainless steel 316L, seal - EPDM
| DN | A, mm | B, mm | L, mm | C, mm | D1, mm | b, mm | HxH, mm |
| DN25 | 93 | 44.5 | 36 | 10 | 50 | 8 | 9х9 |
| DN32 | 93 | 44.5 | 36 | 10 | 50 | 8 | 9х9 |
Sketch of the dimensions of rotary disc valves Elephant WBV0232E-2W-Fb-H DN25-32 16 bar, body - aluminum alloy, disc - stainless steel 316L, seal - EPDM
Overall and installation dimensions of Elephant double-acting rotary pneumatic actuators PA-DA-XXX
| Model | A, mm | B, mm | C, mm | D, mm | E, mm | F, mm | G, mm | H, mm | I, mm | J, mm | M, mm | N, mm | Z, mm | d, mm | K | L |
| PA-DA(SA)-052 | 30 | 41.5 | 65.5 | 72 | 92 | 65 | 30 | 80 | 36 | 50 | 11х11 | 14 | 147 | 40 | M5x8 | M6x10 |
| PA-DA(SA)-065 | 36 | 47 | 81 | 88 | 108 | 72 | 30 | 80 | 50 | 70 | 14х14 | 18 | 168 | 40 | M6x10 | M8x13 |
| PA-DA(SA)-083 | 46 | 57 | 98.5 | 108.7 | 128.7 | 92 | 30 | 80 | 50 | 70 | 17х17 | 21 | 204 | 40 | M6x10 | M8x13 |
| PA-DA(SA)-105 | 57.5 | 64 | 122.5 | 133 | 153 | 109.5 | 30 | 80 | 70 | 102 | 22х22 | 26 | 268 | 40 | M8x13 | M10x16 |
| PA-DA(SA)-130 | 67.5 | 74.5 | 145.5 | 155 | 185 | 127.5 | 30 | 130 | 70 | 102 | 22х22 | 26 | 301 | 55 | M8x13 | M10x16 |
| PA-DA(SA)-140 | 75 | 77 | 161 | 172 | 202 | 137.5 | 30 | 130 | 102 | 125 | 27х27 | 31 | 390 | 55 | M10x16 | M12x20 |
| PA-DA(SA)-160 | 87 | 87 | 184 | 197 | 227 | 159 | 30 | 130 | 102 | 125 | 27х27 | 31 | 458 | 55 | M10x16 | M12x20 |
| PA-DA(SA)-210 | 113 | 113 | 235.5 | 255 | 285 | 210 | 30 | 130 | - | 140 | 36х36 | 40 | 532 | 80 | - | M16x25 |
| PA-DA(SA)-270 | 147 | 147 | 299 | 326 | 356 | 273 | 30 | 130 | - | 165 | 46х46 | 50 | 718 | 80 | - | M20x25 |
Dimensional sketch of the Elephant double-acting rotary pneumatic actuators PA-DA-XXX
Overall and installation dimensions of pneumatic valves Elephant 4V320-10 220V
| A, mm | 71.9 |
| B, mm | 45 |
| C, mm | 94.4 |
| D, mm | 27 |
| E, mm | 69 |
| F, mm | 40 |
| H, mm | 82.4 |
| I, mm | 24 |
| K, mm | 40 |
| L, mm | 188.8 |
| M, mm | 69.4 |
| N, mm | 50 |
| O, mm | 82.4 |
| P, mm | 24 |
| S, mm | 20 |
| T, mm | 6.5 |
| U, mm | 2.4 |
| V, mm | 4 |
Sketch of dimensions of pneumatic distributors Elephant 4V320-10 220V
Overall and installation dimensions of the Elephant ALS200D magnetic switch
| A, mm | B, mm | C, mm | E, mm | d, mm |
| 75 | 30 | 51 | 40 | 5.5 |
Dimensional sketch of the Elephant ALS200D magnetic switch
Materials of parts of rotary disc valves Elephant WBV0232E-2W-Fb-H DN25-32 16 bar, body - aluminum alloy, disc - stainless steel 316L, seal - EPDM
| № | Name | Material |
| 1 | Body | Aluminum alloy |
| 2 | Seat Seal | EPDM |
| 3 | Pin | AISI 304 stainless steel |
| 4 | Disc | AISI 316L stainless steel |
| 5 | Stem | SS 410 stainless steel |
| 6 | O-Ring | EPDM |
| 7 | Plate | 45 stainless steel |
| 10,12 | Gasket | SS 201 stainless steel |
| 11 | Nut | SS 201 stainless steel |
Sketch of materials for rotary disc valves Elephant WBV0232E-2W-Fb-H DN25-32 16 bar, body - aluminum alloy, disc - stainless steel 316L, seal - EPDM
Design of Elephant double-acting rotary pneumatic actuators PA-DA-XXX
| № | Part Name | Material |
| 1 | Indicator Screw | ABS plastic |
| 2 | Position Indicator | ABS plastic |
| 3 | Spring Clamp | 304 stainless steel |
| 4 | Metal Washer | 304 stainless steel |
| 5 | Thrust Washer | Engineering plastic |
| 6 | Housing | Extruded aluminum alloy with hard anodizing |
| 7 | Thrust Washer | Engineering plastic |
| 8 | Stopper | Alloy steel |
| 9 | Upper Shaft Seal Ring | NBR |
| 10 | Upper Shaft Anti-Friction Ring | Engineering plastic |
| 11 | Shaft | Nickel-plated alloy steel |
| 12 | Lower Shaft Anti-Friction Ring | Engineering plastic |
| 13 | Lower Shaft Seal Ring | NBR |
| 14 | Plug | NBR |
| 15 | Adjusting Screw Seal Ring | NBR |
| 16 | Adjusting Screw Washer | 304 stainless steel |
| 17 | Adjusting Screw Lock Nut | 304 stainless steel |
| 18 | Adjusting Screw | 304 stainless steel |
| 19 | Piston | Die-cast aluminum alloy |
| 20 | Piston Guide Pad | Engineering plastic |
| 21 | Piston Anti-Friction Ring | Engineering plastic |
| 22 | Piston Seal Ring | NBR |
| 23 | Spring Kit | Spring steel |
| 24 | Cover Seal Ring | NBR |
| 25 | End Cover | Cast aluminum with polyester coating |
| 26 | Cover Screw | 304 stainless steel |
| 27 | Locking Screw | 304 stainless steel |
| 28 | Adapter | Carbon steel |
Sketch of Elephant double-acting rotary pneumatic actuators PA-DA-XXX
Specifications
Specifications
-
ApplicationsWater Supply, Heat Supply, Chemical Industry, Oil and Gas Industry, Food Industry, Pulp and Paper Industry
Reviews (0)
Reviews (0)
Documentation
Documentation
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Frequently Asked Questions
Shipping
What countries do you ship to?
What countries do you ship to?
We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.
How long will it take to receive my order?
How long will it take to receive my order?
Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).
Returns and Refunds
How do I return a product?
How do I return a product?
Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.
How long will it take to receive my refund?
How long will it take to receive my refund?
Refunds are processed within 7 days from when we receive the item(s).
