Water Butterfly Valve Elephant WBV1632E-2W-Fb-H, body material - cast
Elephant  |  SKU: D050-30862

Water Butterfly Valve Elephant WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, pneumatic actuator PA-DA double action, 4M310-08 24V, LSU APL-210N, handwheel HDM

€412,76
Tax included Shipping calculated at checkout.

Delivery and Shipping

The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.

If you have any questions about our products, delivery options, or anything else, feel free to reach out.

Description

The WBV1632E-2W-Fb butterfly valve is designed for use as a shut-off or control valve to control flows in heat supply systems, water supply, in technological processes in the food, chemical, oil and gas, pulp and paper and other industries. Operating principle: The valves open and close by turning the disk by 90°. Opening is performed by turning the handle counterclockwise, closing - clockwise. 

Pneumatic actuators PA-DA are designed to automate the process of controlling industrial shut-off valves - valves, ball valves. Elephant pneumatic actuators are designed for use both indoors and outdoors. All internal and external parts have an anti-corrosion coating.

Pneumatic distributors 4M310-08 24V 24V are used for control in pneumatic systems with a NAMUR mating surface, for installing distributors through through holes in the housing.

The manual doubler with worm gear and HDM reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual doubler is intended to ensure the most efficient and effective.

The APL-210N limit switch unit is designed for visual and electrical signaling of the end positions of the valve shut-off element. It is installed on top of the surface of the pneumatic drive and connected to the drive shaft - DIN standard. In a sealed box, as a rule, there are two sensors that track the position of the drive shaft and signal in extreme positions. Visual indication of the position can be observed on the body of the unit there is a 3D visual indicator RED - CLOSED and YELLOW - OPEN.

 

 

Technical characteristics of butterfly valves Elephant WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, pneumatic actuator PA-DA double action, 4M310-08 24V, APL-210N, handwheel HDM

Parameter Meaning
Nominal diameter DN, mm 40 - 300
Nominal pressure PN, bar 16
Temperature of working environment t, ⁰C from -20 to +110
Working environment water, steam, aggressive environments and
liquids with abrasive content (cement, sand, alumina, etc.)
Direction of flow bilateral
Control type DN40-200 - handle
DN250-300 - reducer
Connection to the pipeline interflange
Body material cast iron QT450
Seal material EPDM with wear-resistant coating
Service life, years 10

 

 

Sketch of parts of rotary disc valves Elephant WBV1132N-2W-Fb DN40-300 PN16

 

General details and materials of butterfly valves Elephant WBV1132N-2W-Fb DN40-300 PN16

No. Part name Material
1 Frame cast iron QT450
2 Disk Stainless steel 316L
3 Saddle seal EPDM
+ wear-resistant material
(siliclone+graphite)
4 Stock steel 2Cr13

 

 

Sketch of dimensions of butterfly valves Elephant WBV1132N-2W-Fb DN40-300 PN16

 

General weight and dimensions of the Elephant WBV1132N-2W-Fb butterfly valves DN40-300 PN16

DN L H H1 D2 D1 n.d.
DN40 43 147 70 92 125 4- Ø23
DN50 43 147 70 92 125 4- Ø23
DN65 46 155 76 110 145 4- Ø23
DN80 46 164 92 121 160 8- Ø20
DN100 52 175 106 153 180 4- Ø23
DN125 56 194 119 176 210 4- Ø23
DN150 56 206 132 207 240 4- Ø25
DN200 60 237 162 259 295 4- Ø25
DN250 68 282 200 316 355 4-Ø28
DN300 78 311 225 370 410 4-Ø28

 

 

Sketch of pneumatic actuator parts Elephant PA-DA

 

 

General parts and materials of pneumatic actuators Elephant PA-DA

No. Detail Quantity Material
1 Frame 1 extruded aluminum
2 Side plugs 2 cast aluminum
3 Gear 1 stainless steel
4 Piston 2 steel/aluminum
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clamp 2 stainless steel
15 Indicator 1 plastic
16 Indicator housing 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 Sealing ring 2 NBR
23 Sealing ring 2 NBR
24 Bearing 2 stainless steel
25 Adjusting nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Sleeve 2 aluminum

 

 

Sketch of dimensions of pneumatic actuators Elephant PA-DA

 

General weight and dimensions parameters of pneumatic actuators Elephant PA-DA

Model A, mm B, mm C, mm G, mm d1 d2 J TO Mmm N, mm Weight, kg
Elephant PA-DA-052 153 71 98 15 F03 F05 4-M5x8 4-M6x10 80 30 1,2
Elephant PA-DA-065 174 82 115 15 F05 F07 4-M6x10 4-M8x12 80 30 1.9
Elephant PA-DA-083 216 101 135 15 F05 F07 4-M6x10 4-M8x12 80 30 3.2
Elephant PA-DA-105 279 119 160 25 F07 F10 4-M8x12 4-M10x16 80 30 6.1
Elephant PA-DA-130 308 137.5 193 25 F07 F10 4-M8x12 4-M10x16 80 30 9.5
Elephant PA-DA-140 405 153 210 30 F10 F12 4-M10x16 4-M12x20 130 30 13.7
Elephant PA-DA-160 465 175 237 30 F10 F12 4-M10x16 4-M12x20 130 30 20.5
Elephant PA-DA-210 542 226 295 40 / F14 / 4-M12x20 130 30 41.8
Elephant PA-DA-270 722 292 371 52 / F16 / 4-M20x24 130 30 86.3
Elephant PA-DA-300 825 335 392 52 / F16 / 4-M20x24 130 30 103
Elephant PA-DA-350 866 385 448 52 / F16 / 4-M20x24 130 30 144

 

 

Technical characteristics of the pneumatic distributor 4M310-08 24V 24V

Construction spool type
Nominal pressure PN, MPa (kg/cm2) 1,2 (12)
Working pressure, bar 1,5…8
Working environment filtered compressed air
Ambient temperature t, ⁰C from +5 to +50
Response frequency 5 cycles/s
Manual duplication There is
Degree of protection IP 65
Fastening through through holes in the body
Body material anodized aluminum
Response time 0.05 sec.

 

 

Sketch of dimensions of manual backups Elephant-HDM

 

General weight and dimensions of manual backup valves Elephant-HDM

Model D2, mm A, mm T, mm Y, mm H, mm S, mm Steering wheel diameter, mm Weight, kg
HDM-1 70 90 44 145 120 53 180 3
HDM-2 102 125 62.5 178 133 56.5 200 4.5
HDM-3 125 140 70 212 180 68.7 280 6.9
HDM-4 125 188.5 94 280 195 84 320 13.7

 

 

Limit Switch Block Elephant APL-210N 

 

Characteristics of the limit switch unit Elephant APL-210N

Parameter Meaning
Protection All-weather IP65

Ambient temperature 		From -40°C to +80°C
Cable entry thread 2 x NPT1/2”
Terminal block 8 cells 0.08-2.6mm²
Voltage 12V, 24V, 38V, 48V, 110V, 220V,
250V
Indicator position CLOSED: red OPEN: green
Sensor 2 SPDT Electromechanical Microswitches OMRON
V151-1C25
External coating Polyester coating
(black)
Shaft Standard shaft (17mm)

Specifications
  • Country of origin
    China
  • Body material
    cast iron QT450
  • Maximum allowable temperature
    110 °C
  • Connection type
    compact flanged
  • Control type
    Pneumatic actuator
  • Operating environment
    Water, Steam, Aggressive Media, Abrasive Media
  • Applications
    Water Supply, Heating, Chemical Industry, Oil And Gas Industry, Food Industry
  • Nominal pressure
    16 bar
  • Type of seal
    EPDM
  • Disc material
    stainless steel AISI 316L
  • Explosion-proof
    No
  • Manual override
    handwheel
  • Limit switches
    Yes
  • Supply voltage
    24 V
  • Type of pneumatic actuator
    double action
  • Angle of rotation
    90°

Reviews (0)

Documentation
nullPneumatic valve ELEPHANT 4M310-08 spool type
nullButterfly valve for abrasive media Elephant WBV1632E-2W-Fb-H DN40-200 16 bar cast iron interflanged with handle
nullPneumatic rotary actuator ELEPHANT PA-x-x double-acting and with return springs

Payment & Security

Payment methods

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Available Variants

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D050-30862DN10016 bar €412,76 Sold out
    D050-30863DN12516 bar €525,41 Sold out
    D050-30864DN15016 bar €676,13 Sold out
    D050-30865DN20016 bar €863,51 Sold out
    D050-30858DN4016 bar €1.006,62 Sold out
    D050-30859DN5016 bar €390,29 Sold out
    D050-30860DN6516 bar €399,89 Sold out
    D050-30861DN8016 bar €397,04 Sold out

    Frequently Asked Questions

    Shipping

    What countries do you ship to?

    We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.

    How long will it take to receive my order?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).