Water Butterfly Valve Elephant WBV1632E-2W-Fb-H, body material - cast
Elephant  |  SKU: D050-30622

Water Butterfly Valve Elephant WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, pneumatic actuator PA-DA double action, 4M310-08 24V, LSU APL-210N ATU AFC2000

€365,27
Tax included Shipping calculated at checkout.

Delivery and Shipping

The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.

If you have any questions about our products, delivery options, or anything else, feel free to reach out.

Description

The WBV1632E-2W-Fb butterfly valve is designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries. Operating principle: The valves are opened and closed by turning the disk by 90°. Opening is performed by turning the handle counterclockwise, closing - clockwise. 

PA-DA pneumatic actuators are designed for automation of control process of industrial shut-off valves - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.

Pneumatic actuators 4m310-08 24V are used for control in pneumatic systems having NAMUR docking surface for installation of actuators through through holes in the housing.

Air treatment unit AFC2000 is designed for compressed air purification from dripping moisture and solid particles, condensate removal, automatic maintece of pressure at the set level, lubricant supply from the tank to the compressed air flow to the elements of the pneumatic system with a wide range of throughput from 500 liters/minute to 10 000 liters/minute. Lubricator (oil atomizer) adds oil with viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic valves.

The APL-210N limit switch unit is designed for visual and electrical signaling of the valve end positions. It is mounted from above on the surface of the pneumatic actuator and connected to the actuator shaft - DIN standard. The sealed box usually contains two sensors which monitor the position of the actuator shaft and signalize the end positions. Visual indication of the position can be observed on the body of the unit there is a 3D visual indicator RED-CLOSED and YELLOW-OPEN.

 

 

Technical parameters of Water Butterfly Valve Elephant WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, pneumatic actuator PA-DA double action, 4M310-08 24V, LSU APL-210N ATU AFC2000:

Parameter Value
Nominal diameter DN, mm 40 - 300
Nominal pressure PN, bar 16
Working medium temperature t, ⁰C -20 to +110
Working medium water, steam, aggressive media and liquids with abrasive content (cement, sand, alumina, etc.)
Flow direction double-sided
Control type DN40-200 - handle
DN250-300 - reducer
Connection to pipeline interflanged
Body material cast iron QT450
Sealing material EPDM with wear resistant coating
Service life, years 10

Butterfly valves WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, pneumatic actuator PA-DA double action, 4M310-08 24V, LSU APL-210N ATU AFC2000

 

 

Dimensions and dimensions of butterfly valves Elephant WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, pneumatic actuator PA-DA double action, 4M310-08 24V, LSU APL-210N ATU AFC2000:

DN L H H1 D2 D1 n-d
40 43 147 70 92 125 4- Ø23
50 43 147 70 92 125 4- Ø23
65 46 155 76 110 145 4- Ø23
80 46 164 92 121 160 8- Ø20
100 52 175 106 153 180 4- Ø23
125 56 194 119 176 210 4- Ø23
150 56 206 132 207 240 4- Ø25
200 60 237 162 259 295 4- Ø25
250 68 282 200 316 355 4-Ø28
300 78 311 225 370 410 4-Ø28

Sketch Butterfly valves WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, pneumatic actuator PA-DA double action, 4M310-08 24V, LSU APL-210N ATU AFC2000

 

 

Materials of butterfly valves Elephant WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, pneumatic actuator PA-DA double action, 4M310-08 24V, LSU APL-210N ATU AFC2000:

№ Part name Material
1 Body cast iron QT450
2 Disk 316L stainless steel
3 Seat seal EPDM + wear resistant material (siliclone+graphite)
4 Stem 2Cr13 steel

Sketch of parts and materials Butterfly valves WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, pneumatic actuator PA-DA double action, 4M310-08 24V, LSU APL-210N ATU AFC2000

 

 

Technical data of PA-DA pneumatic actuators:

Design Double action
Nominal pressure PN, bar 12
Working pressure, bar 2...8
Working medium Filtered compressed air or non-aggressive gases, oils
Maximum particle diameter less than 30 µm2
Operating temperature t, ⁰C - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air)
Adjustment range ± 5 ° for rotation at 0 ° and 90 °
Manual override is
Position indicator open/closed
Operating environment indoors and outdoors. (All internal and external parts are anti-corrosion coated)


PA-DA pneumatic actuator

 

 

Dimensions and mounting dimensions of double-acting rotary actuators PA-DA-XXX:

Model A, mm B, mm C, mm D, mm E, mm F, mm G, mm M, mm N, mm O, mm P, mm
PA-DA(SA)-052 108 153 30 41 72 26 15 80 30 34 20
PA-DA(SA)-065 125 174 36 46 89 26 15 80 30 34 20
PA-DA(SA)-083 152 216 46 55 109 26 15 80 30 34 20
PA-DA(SA)-105 189 279 55 64 134 26 25 80 30 41 20
PA-DA(SA)-130 210 308 67.5 70 157 36 25 80 30 62 30
PA-DA(SA)-140 268 405 76 77 174 36 30 130 30 62 30
PA-DA(SA)-160 310 465 87.5 87.5 199 38 30 130 30 62 30
PA-DA(SA)-210 390 542 113 113 257 38 40 130 30 79 30
PA-DA(SA)-270 510 722 146 146 333 38 52 130 30 79 30

Dimensions of double-acting rotary actuators PA-DA-XXX

 

 

PA-DA pneumatic actuator component materials:

№ Name Material
1 Enclosure extruded aluminum
2 Side plugs cast aluminum
3 Gear stainless steel
4 Piston steel/aluminum
5 Plugs stainless steel
6 Piston ring NBR
7 Springs spring steel
8 Piston bearing engineering plastic
9 Piston ring NBR
10 Plug NBR
11 Thrust ring engineering plastic
12 Ring engineering plastic
13 Washer stainless steel
14 Spring clip stainless steel
15 Indicator plastic
16 Indicator housing plastic
17 Bearing engineering plastic
18 Cam steel
19 Bearing NBR
20 Bearing engineering plastic
21 Bearing engineering plastic
22 Sealing ring NBR
23 Sealing ring NBR
24 Bearing stainless steel
25 Adjustment nut stainless steel
26 Adjustment screw stainless steel
27 Sleeve aluminum
Parts and material sketch of the PA-DA pneumatic actuator

 

 

Technical characteristics of the pneumatic valve 4m310-08 24V:

Design spool type
Nominal pressure PN, MPa (kg/cm2) 1,2 (12)
Working pressure, bar 1,5...8
Working medium filtered compressed air
Ambient temperature t, ⁰C +5 to +50
Response frequency 5 cycles/s
Manual duplication is
Degree of protection IP 65
Mounting through holes in the housing
Enclosure material anodized aluminum
Response time 0.05 sec.

Pneumatic valves 4M310-08 24V

 

 

Overall and installation dimensions of pneumatic valves 4M310-08 24V:

Depth, mm 27
Height, mm 69
Width, mm 134.5

 

Sketch of dimensions of pneumatic valves 4M310-08 24V

 

 

Technical parameters of limit switch unit APL-210N:

Name Value
Model of limit switch unit APL-210N
Maximum voltage of limit switch, V 250
Working environment temperature, °C -40 to +80
Service life, years 10

Limit switch unit APL-210N

 

 

Dimensions and dimensions of the APL-210N limit switch unit:

Model H, mm L, mm B, mm D, mm D1, mm M
APL-210N 77 112 88 10 5 20x1.5

Sketch of dimensions and dimensions of limit switch unit APL-210N

 

 

Main parameters of the AFC2000 air treatment unit:

Operating pressure, bar 8
Maximum pressure, bar 10
Adjustable pressure range, bar 0,5 ÷ 9
Breaking pressure, bar 15
Air connection 1/4”
Operating temperature, C -5 to +60
Filter particle size, µm 40
Oil viscosity ISO VG 32
Weight, kg 0,395
Set composition filter-moisture separator, pressure regulator, lubricator, bracket

Air treatment unit AFC2000

 

 

Overall and installation dimensions of AFC2000 air treatment units:

A, mm 162
B, mm 88
C, mm 139
D, mm 31
E, mm 53.5
F, mm 12
G, mm 8
H, mm 7
I, mm 13.3
J, mm 39
K, mm 5
L, mm 40
M, mm 32
N, mm 53
O, mm 29
P, mm 6
R, mm 41.5

Sketch of dimensions of AFC2000 air treatment units

Specifications
  • Country of origin
    China
  • Body material
    cast iron QT450
  • Maximum allowable temperature
    110 °C
  • Connection type
    compact flanged
  • Control type
    Pneumatic actuator
  • Operating environment
    Water, Steam, Aggressive Media, Abrasive Media
  • Applications
    Water Supply, Heating, Chemical Industry, Oil And Gas Industry, Food Industry
  • Nominal pressure
    16 bar
  • Type of seal
    EPDM
  • Disc material
    stainless steel AISI 316L
  • Explosion-proof
    No
  • Manual override
    No
  • Limit switches
    Yes
  • Supply voltage
    24 V
  • Type of pneumatic actuator
    double action
  • Angle of rotation
    90°

Reviews (0)

Documentation
nullAir treatment unit AFC2000 ELEPHANT
nullPneumatic valve ELEPHANT 4M310-08 spool type
nullButterfly valve for abrasive media Elephant WBV1632E-2W-Fb-H DN40-200 16 bar cast iron interflanged with handle
nullPneumatic rotary actuator ELEPHANT PA-x-x double-acting and with return springs

Payment & Security

Payment methods

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Available Variants

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D050-30622DN10016 bar €365,27 Sold out
    D050-30623DN12516 bar €444,26 Sold out
    D050-30624DN15016 bar €548,30 Sold out
    D050-30625DN20016 bar €733,81 Sold out
    D050-30618DN4016 bar €295,23 Sold out
    D050-30619DN5016 bar €306,12 Sold out
    D050-30620DN6516 bar €315,62 Sold out
    D050-30621DN8016 bar €349,71 Sold out

    Frequently Asked Questions

    Shipping

    What countries do you ship to?

    We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.

    How long will it take to receive my order?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).