Water Butterfly Valve Elephant WBV1331E-2W-F-H, flanged, body - cast iron GGG40, disc - stainless steel 304, seal - EPDM, with pneumatic actuator PA-DA-105-1, with pneumatic distributor 4V320-08 220V
Water Butterfly Valve Elephant WBV1331E-2W-F-H, flanged, body - cast iron GGG40, disc - stainless steel 304, seal - EPDM, with pneumatic actuator PA-DA-105-1, with pneumatic distributor 4V320-08 220V - DN50 / 16 bar is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.
Description
Description
Elephant WBV1331E-2W-F-H butterfly valves are designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
Pneumatic valve Elephant 4V320-08 220V is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.
The Elephant APL-510N EX limit switch unit is an electrical device designed to open and close the working circuit and to visualise the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalise extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-coloured visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labelled CLOSED is visible; if it is open, only the yellow part labelled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the colour difference between the open and closed position reduces the probability of misinterpretation of information. The use of the AFC2000 makes it possible to transmit information on the position of the valve (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.
The AFC2000 air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain pressure at a preset level, supply lubricant from the tank to the compressed air flow to the pneumatic system elements with a large capacity range from 500 litres/minute to 10,000 litres/minute. The lubricator (oil atomiser) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic valves.
Technical parameters Rotary disc gate valves Elephant WBV1331E-2W-F-H, flanged, body - cast iron GGG40, disk - stainless steel 304, seal - EPDM
Name | Value |
---|---|
Nominal pressure PN, bar | 16 |
Operating temperature, °C | from -25 to 130 |
Application | water supply, industry, heating systems |
Pipe connection | flanged |
Valve type | rotary disc |
Control type | pneumatic drive |
Country of manufacture | China |
Dimensions and dimensions of Butterfly valves Elephant WBV1331E-2W-F-H, flanged, body - cast iron GGG40, disk - stainless steel 304, seal - EPDM
DN | L | D | F | L1 |
50 | 108 | 125 | 153 | 495 |
65 | 112 | 145 | 153 | 495 |
80 | 114 | 160 | 153 | 495 |
100 | 127 | 180 | 153 | 495 |
Sketch of rotary disc gate valves Elephant WBV1331E-2W-F-H, flanged, body - cast iron GGG40, disk - stainless steel 304, seal - EPDM
Table of parts and materials for butterfly disc gate valves Elephant WBV1331E-2W-F-H, flanged, body - cast iron GGG40, disk - stainless steel 304, seal - EPDM
No. | Part Name | Material |
---|---|---|
1 | Body | cast iron GGG40 |
2 | Disk | stainless steel 304 |
3 | Saddle sealing | EPDM |
4 | Stem | stainless steel SS 420 |

Technical parameters of pneumatic actuator PA-DA-105-1:
Type of pneumatic actuator | double-acting |
Control pressure, bar | 2 ÷ 8 |
Operating temperature, °C | -20 to +80 |
Visual position indicator | open / closed |
Manual control | handwheel |
Swivel angle, ° | 90 ± 5 |
Top connection standard | NAMUR |
Air connection standard | NAMUR |
Air supply connection thread | G 1/4ʺ |
ISO flange type | F07/F10 |
Stem square, mm | 22x22 |
Weight, kg | 9 |
Average life, cycles closed/open | 300 000 |
Pneumatic actuator PA-DA-105-1
Dimensions and dimensions of the pneumatic actuator PA-DA-105-1:
A, mm | 495 |
A1, mm | 461.5 |
B, mm | 133 |
C, mm | 109.5 |
D, mm | 153 |
E, mm | 57.5 |
F, mm | 64 |
G, mm | 26 |
H, mm | 80 |
I, mm | 30 |
N, mm | 22 |
W, mm | 200 |
J, mm | 102 |
K, mm | 70 |
L, mm | M10x16 |
M, mm | M8x13 |
O, mm | 4 |
P, mm | 4 |
S, mm | M6 |
T, mm | 24 |
U, mm | 32 |
Sketch of dimensions and dimensions of pneumatic actuator PA-DA-105-1
PA-DA-105-1 air actuator parts and materials table:
№ | Part name | Material |
1 | Indicator screw | ABS (plastic) |
2 | Position indicator | ABS (plastic) |
3 | Spring clip | Stainless steel 304 |
4 | Washer | Stainless steel 304 |
5 | External washer | Engineering plastic |
6 | Adjustment screw | Stainless steel 304 |
7 | Nut | Stainless steel 304 |
8 | Washer | Stainless steel 304 |
9 | Body | Extruded aluminum alloy |
10 | Piston | Die cast aluminum alloy |
11 | Piston O-ring | NBR |
12 | Bearing group | Engineering plastic |
13 | End cap O-ring | NBR |
14 | End cap | Die cast aluminum alloy coated with polyester paint |
15 | Fixing screw | Stainless steel 304 |
16 | Internal washer | Engineering plastic |
17 | Sealing ring | NBR |
18 | Bearing | Engineering plastic |
19 | Retainer | Alloy steel |
20 | Gear | Alloy steel |
21 | Bearing | Engineering plastic |
22 | Sealing ring | NBR |
Parts and material sketch of the PA-DA-105-1 pneumatic actuator
Technical parameters of pneumatic valve Elephant 4V320-08 220V
Name | Value |
---|---|
Type of pneumatic distributor | Spool type |
Model of pneumatic distributor | 4V320-08 220V |
Operating pressure, bar | 1.5 ÷ 1.8 |
Supply voltage, V | 220 V |
Switching frequency, cycle/sec | 5 |
Specifications
Specifications
-
Country of origin
-
Body material
-
Maximum allowable temperature
-
Connection type
-
Type of seal
-
Disc material
Reviews (0)
Reviews (0)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Frequently Asked Questions
Shipping
What countries do you ship to?
What countries do you ship to?
We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.
How long will it take to receive my order?
How long will it take to receive my order?
Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).
Returns and Refunds
How do I return a product?
How do I return a product?
Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.
How long will it take to receive my refund?
How long will it take to receive my refund?
Refunds are processed within 7 days from when we receive the item(s).