Ball valves Elephant BV3232P(2pc)-FP-F-ISO-H DN15-250 flanged, two-piece, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-210 pneumatic distributor 4M310-08 220V reducer MON ATU AFC2000 LSU APL-510N-EX

The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.

Pneumatic actuators PA-DA-1 are designed to automate the process of controlling industrial shut-off valves - valves, ball valves. Pneumatic actuators Dn.ru are designed for use both indoors and outdoors. All internal and external parts have an anti-corrosion coating.

Pneumatic distributors 4M310-08 220 V are used for control in pneumatic systems with a NAMUR mating surface for installing distributors through through holes in the housing.

The Dn.ru MON manual override with worm gear and HDM reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution to the entire range of manual override tasks.

The AFC2000 air preparation unit is designed to clean compressed air from droplet moisture and solid particles, remove condensate, automatically maintain the pressure at a given level, supply lubricant from the tank to the compressed air flow to the pneumatic system elements with a large range of throughput from 500 liters/minute to 10,000 liters/minute. The lubricator (oil sprayer) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic distributors.

The Dn.ru APL-510N-EX limit switch unit is an electrical device designed to open and close the working circuit and to visualize the positions of the shut-off element of pipeline valves. As a rule, a sealed box contains two mechanical switches rated for up to 250 V, which monitor the position of the actuator rod and signal in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color hemisphere of the visual indicator. If the connected pipeline valve is closed, then only the red part of the hemisphere with the inscription CLOSED is visible; if open, only the yellow part with the inscription OPEN. This visual indicator is clearly visible from afar, which simplifies the inspection of the equipment, and the color difference between the open and closed positions reduces the likelihood of erroneous perception of information. Thanks to the use of the LSU, it becomes possible to transmit information about the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics when faults are detected.

Technical data of ball valves Elephant BV3232P(2pc)-FP-F-ISO-H PA-DA 4M310-08 220V APL-510N Ex MON AFC2000

Sketch of detailing of ball valves Elephant BV3232P(2pc)-FP-F-ISO-H PA-DA 4M310-08 220V APL-510N Ex MON AFC2000

Materials of parts of ball valves Elephant BV3232P(2pc)-FP-F-ISO-H PA-DA 4M310-08 220V APL-510N Ex MON AFC2000

Sketch of ball valves Elephant BV3232P(2pc)-FP-F-ISO-H PA-DA 4M310-08 220V APL-510N Ex MON AFC2000

Overall and installation dimensions of ball valves Elephant BV3232P(2pc)-FP-F-ISO-H PA-DA 4M310-08 220V APL-510N Ex MON AFC2000