Ball valves Elephant BV3232P-SP-3L-T 3-way L-type, threaded, standard bore, body - stainless steel SS316, seal - PTFE, with pneumatic actuator Elephant PA-DA 052 -083 and LSU APL-510N-EX

Ball valves are used as shut-off valves in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) that are not aggressive to valve materials.
Pneumatic actuators PA-DA are designed to automate the process of controlling industrial shut-off valves - gates, ball valves. Pneumatic actuators Elephant are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
Limit switch unit Elephant APL-510N-EX is an electrotechnical device designed to open and close the working circuit and to visualize the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Thanks to the use of BCV it Weightomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics in case of fault detection.

Technical parameters of ball valves Elephant BV3232P-SP-3L-T 3-way L-type, threaded, standard bore, body - stainless steel SS316, seal - PTFE, with pneumatic actuator Elephant PA-DA 052 -083 and LSU APL-510N-EX:

Materials of ball valves Elephant BV3232P-SP-3L-T 3-way L-type, threaded, standard bore, body - stainless steel SS316, seal - PTFE, with pneumatic actuator Elephant PA-DA 052 -083 and LSU APL-510N-EX:

Overall and installation dimensions of ball valves Elephant BV3232P-SP-3L-T 3-way L-type, threaded, standard bore, body - stainless steel SS316, seal - PTFE, with pneumatic actuator Elephant PA-DA 052 -083 and LSU APL-510N-EX:

Technical data of pneumatic actuators PA-DA:

Pneumatic actuator component materials PA-DA:

Characteristics of limit switch unit APL-510N-EX:

Passports and certificates

Data sheet for Elephant DA/SA double-acting pneumatic actuator with return springs