Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H, body material - Stainless steel AISI 316, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA, 4V320-10 220V, BKV APL-210N, handwheel MON

Ball valve Elephant BV3232P(2pc)-FP-T-ISO-H is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of BV3232P(2pc)-FP-T-ISO-H series valves is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) that are not aggressive to valve materials.

Double-acting pneumatic actuator Elephant PA-DA is designed for automation of control process of industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.

Pneumatic valve Elephant 4V320-10 220V is used to change direction, start, stop compressed air flows in pneumatic system depending on external control action.

The Elephant APL-210N limit switch box is an electrical device designed for opening and closing of the working circuit and for visualisation of the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalise extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-coloured visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labelled CLOSED is visible; if it is open, only the yellow part labelled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the colour difference between open and closed position reduces the probability of misinterpretation of information. Thanks to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.

The Elephant MON manual doubleturn actuator with worm gear and HDM reduction gearbox enables manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.

Technical parameters of Elephant BV3232P(2pc)-FP-T-ISO-H ball valves with PA-DA double-acting pneumatic actuator, 4V320-10 220V pneumatic distributor, APL-210N BKV, MON manual override:

Sketch of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H with double-acting pneumatic actuator PA-DA, pneumatic distributor 4V320-10 220V, BKV APL-210N, manual backup MON

Dimensions and sizes of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H with double-acting pneumatic actuator PA-DA, pneumatic distributor 4V320-10 220V, BKV APL-210N, manual backup MON:

Sketch of parts and materials of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H

Table of parts and materials of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H:

Technical parameters of the PA-DA double-acting pneumatic actuator:

Sketch of parts and materials of Elephant PA-DA double-acting pneumatic actuator

Parts and materials table for double-acting pneumatic actuator Elephant PA-DA:

Technical parameters of the Elephant 4V320-10 220V pneumatic valve

Limit Switch Block Elephant APL-210N

Technical parameters of the limit switch unit Elephant APL-210N

Table of parts and materials of the limit switch block Elephant APL-210N:

Sketch of manual backup Elephant MON

Technical parameters of manual backups Elephant MON:

Sketch of parts and materials of manual backup Elephant MON