Water Butterfly Valve Elephant WBV0232E-2W-Fb-H, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-065, 4V320-10 220V, handwheel MON, BKV APL-510N-EX
Water Butterfly Valve Elephant WBV0232E-2W-Fb-H, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-065, 4V320-10 220V, handwheel MON, BKV APL-510N-EX - DN25 / 16 bar ist auf Lager und wird versandt, sobald es wieder verfügbar ist
Verfügbarkeit für Abholungen konnte nicht geladen werden
Delivery and Shipping
Delivery and Shipping
The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.
Beschreibung
Beschreibung
Butterfly valve model WBV0232E-2W-Fb PA-DA 4V320-10 APL-510N-EX MON 4V320-10 220V is designed for use as shut-off or regulating valves to control flows in heating systems, water supply, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
PA-DA pneumatic actuators are designed for automation of industrial shut-off valves control process - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
Pneumatic actuators 4V320-10 220V 220V are used for control in pneumatic systems having NAMUR docking surface to install the actuators through through holes in the body.
The HDM worm gear reduction manual doublet allows manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution to the full range of manual override applications.
The APL-510N-EX limit switch unit is an electrotechnical device designed to open and close the working circuit and to visualize the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.
Technical parameters of Elephant WBV0232E-2W-Fb-H butterfly valves, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-065, 4V320-10 220V, handwheel MON, BKV APL-510N-EX:
Name | Significance |
Working pressure, bar | 16 |
Working medium temperature, °С | from -20 to 120 |
Application | water supply, heating |
Connection to pipeline | interflanged |
Gate type | swivel disk |
Ball valve tightness class | A according to GOST 9544 |
Control type | pneumatic actuator |
Manufacturer's country | China |
Butterfly valves WBV0232E-2W-Fb-H, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-065, 4V320-10 220V, handwheel MON, BKV APL-510N-EX
Dimensions and dimensions of Elephant WBV0232E-2W-Fb-H butterfly valves, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-065, 4V320-10 220V, handwheel MON, BKV APL-510N-EX:
DN | A, mm | C, mm | K, mm | L1, mm | E, mm | K, mm | I, mm |
25 | 93 | 89 | 121.4 | 174 | 36 | 180 | 104 |
32 | 93 | 89 | 121.4 | 174 | 36 | 180 | 104 |
Sketch Butterfly valves WBV0232E-2W-Fb-H, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-065, 4V320-10 220V, handwheel MON, BKV APL-510N-EX
Materials of parts Elephant WBV0232E-2W-Fb-H butterfly valves, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-065, 4V320-10 220V, handwheel MON, BKV APL-510N-EX:
№ п/п | Part name | Material |
1 | Body | aluminum alloy |
2 | Seat seal | EPDM |
3 | Pin | SS304 stainless steel |
4 | Disk | 316L stainless steel |
5 | Stem | SS410 stainless steel |
6 | O-ring | EPDM |
7 | Plate | steel 45 |
8 | Handle | ductile iron |
9 | Bolt | SS201 stainless steel |
10 | Gasket | SS201 stainless steel |
11 | Nut | SS201 stainless steel |
12 | Gasket | stainless steel SS201 |
Sketch of parts and materials Butterfly valves WBV0232E-2W-Fb-H, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-065, 4V320-10 220V, handwheel MON, BKV APL-510N-EX
Technical data of PA-DA pneumatic actuators:
Design | Double action |
Nominal pressure PN, bar | 12 |
Working pressure, bar | 2...8 |
Working medium | Filtered compressed air or non-aggressive gases, oils |
Maximum particle diameter | less than 30 µm2 |
Operating temperature t, ⁰C | - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air) |
Adjustment range | ± 5 ° for rotation at 0 ° and 90 ° |
Manual override | is |
Position indicator | open/closed |
Operating environment | indoors and outdoors. (All internal and external parts are anti-corrosion coated) |
PA-DA pneumatic actuator
PA-DA pneumatic actuator component materials:
№ | Name | Material |
1 | Enclosure | extruded aluminum |
2 | Side plugs | cast aluminum |
3 | Gear | stainless steel |
4 | Piston | steel/aluminum |
5 | Plugs | stainless steel |
6 | Piston ring | NBR |
7 | Springs | spring steel |
8 | Piston bearing | engineering plastic |
9 | Piston ring | NBR |
10 | Plug | NBR |
11 | Thrust ring | engineering plastic |
12 | Ring | engineering plastic |
13 | Washer | stainless steel |
14 | Spring clip | stainless steel |
15 | Indicator | plastic |
16 | Indicator housing | plastic |
17 | Bearing | engineering plastic |
18 | Cam | steel |
19 | Bearing | NBR |
20 | Bearing | engineering plastic |
21 | Bearing | engineering plastic |
22 | Sealing ring | NBR |
23 | Sealing ring | NBR |
24 | Bearing | stainless steel |
25 | Adjustment nut | stainless steel |
26 | Adjustment screw | stainless steel |
27 | Sleeve | aluminum |
Parts and material sketch of the PA-DA pneumatic actuator
Technical parameters of pneumatic valve 4V320-08 220V:
Name | meaning |
Type of pneumatic valve | slide valve |
Working pressure, bar | 1.5 ÷ 1.8 |
Supply voltage, V | 220 В |
Total power, Va | 4.5 |
Control | double-sided electromagnetic |
Frequency of operation, cycle/sec | 5 |
Pneumatic valve 4V320-08 220V
Dimensions and dimensions of pneumatic valve 4V320-08 220V:
Pneumatic valve model | 4V320-08 |
A, mm | 71.9 |
B, mm | 45 |
C, mm | 94.4 |
D, mm | 27 |
E, mm | 69 |
F, mm | 40 |
I, mm | 24 |
K, mm | 40 |
L, mm | 188.8 |
M, mm | 69.4 |
N, mm | 50 |
O, mm | 82.4 |
P, mm | 24 |
S, mm | 20 |
T, mm | 6.5 |
U, mm | 2.4 |
V, mm | 4 |
H, mm | 82.4 |
Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V
Technical parameters of the handwheel:
Name | Value |
Climatic version | U,UHL,T,OM |
Degree of protection, IP | 67 |
Connection type | ISO 5211 |
Manual doubler
Dimensions and dimensions of the handwheel:
Manual doubler model | HDM-1 |
b1, mm | 14 |
N, mm | 22 |
b2, mm | 14 |
M, mm | 16 |
D1, mm | 50 |
D2, mm | 70 |
D3, mm | 50 |
D4, mm | 70 |
ØC, mm | 88 |
C, mm | 120 |
А, mm | 90 |
F, mm | 115 |
Y, mm | 145 |
4-M1 | 4-M6 |
4-M2 | 4-M8 |
4-Ø1 | 4-Ø6.5 |
4-Ø2 | 4-Ø8.5 |
E, mm | 70х70 |
B, mm | 55 |
S, mm | 53 |
K, mm | 10 |
T, mm | 145 |
Sketch of the dimensions and dimensions of the handwheel
HDM handwheel materials:
№ | Name | Material |
1 | Stem for mounting the pneumatic actuator | Steel 45 |
2 | Sealing ring | EPDM |
3 | Fixing spring | Spring steel |
4 | Upper end cover | Aluminum alloy |
5 | Screw | Steel 304 |
6 | Locking bracket (main rod) | Steel 304 |
7 | Housing | Aluminum alloy |
8 | Sealing ring | EPDM |
9 | Gear unit | Cast iron BCh50 |
10 | Transition coupling | Cast iron BCh40 |
11 | Gear stem | Cast iron BCh40 |
Sketch of parts and materials of the handwheel doubler
Characteristics of limit switch unit APL-510N-EX:
Parameter | Value |
Enclosure | all-weather IP67/ NEMA4 4X,7,9 explosion-proof E EX d IIC T6 |
Compatible devices | quarter-turn pneumatic actuators; -any actuators with shaft rotation by 90° |
Full rotation angle | 90° |
Cable glands | 2 x NPT 3/4” |
Electrical connection | screw terminals 8 points (0.08 - 2.5) mm2 |
Cable gland thread | 2 x NPT 3/4” |
Type of visual indicator | two-color hemisphere: OPEN (Open) - yellow CLOSED (Closed) - red |
Switches/sensors | two mechanical switches two proximity sensors |
Rated voltage, V | 250 |
Rated current, A | 16 |
Permissible ambient temperature, °С | -20 to +66 |
Average life, cycles | 10 000 000 |
Weight, kg | 1.8 |
Spezifikation
Spezifikation
-
Country of origin
-
Body material
-
Maximum allowable temperature
-
Connection type
-
Control type
-
Nominal pressure
-
Type of seal
-
Disc material
-
Explosion-proof
-
Torque
-
Manual override
-
Limit switches
-
Feedback sensor
-
Supply voltage
-
Type of pneumatic actuator
-
Angle of rotation
Bewertungen (0)
Bewertungen (0)
Zahlung & Sicherheit
Zahlungsmethoden
Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite
Häufig gestellte Fragen
Versand
In welche Länder liefern Sie?
In welche Länder liefern Sie?
Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.
Wie lange dauert es, bis ich meine Bestellung erhalte?
Wie lange dauert es, bis ich meine Bestellung erhalte?
Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).
Returns and Refunds
How do I return a product?
How do I return a product?
Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.
How long will it take to receive my refund?
How long will it take to receive my refund?
Refunds are processed within 7 days from when we receive the item(s).