Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN80-100 16 bar full bore – Valve Elephant
Elephant  |  SKU: D160-37125

Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN80-100 16 bar full bore coupling, body - stainless steel SS316, seal - PTFE, with pneumatic drive Elephant PA-DA-105 and BKV APL-210N

€470,00
inkl. MwSt. Versand wird beim Checkout berechnet.

Lieferung und Versand

Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.

Wenn Sie Fragen zu unseren Produkten, Lieferoptionen oder anderen Themen haben, zögern Sie nicht, uns zu kontaktieren.

Beschreibung

Ball valves are used as shut-off valves in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve. The use of ball valves as regulating valves is not allowed.
Limit switch unit is designed for visual and electrical signaling of the end positions of the shut-off valve, valve or disc gate. It is mounted on top of the pneumatic actuator surface and connected to the actuator shaft in DIN standard. The sealed box usually contains two sensors, which monitor the position of the actuator shaft and signalize in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. Visual indication of the position can be observed on the housing of the unit there is a 3D visual indicator RED-CLOSED and GREEN-OPEN.

 

 

 

Technical parameters of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN80-100 16 bar full bore coupling, body - stainless steel SS316, seal - PTFE, with pneumatic drive Elephant PA-DA-105 and BKV APL-210N:

Parameter

Value

Nominal pressure PN, bar

40

Working medium temperature, °C

From -20 to 230

Type of valve device

Two-way

Application

Heating supply

Working medium

Water, air, steam, mildly aggressive media, oils, service water, water-glycol solutions, petroleum products

Connection to pipeline

Coupling (threaded)

Type of passage section

Full bore

Control type

With pneumatic actuator

Connection

Female thread

Control

Double-acting pneumatic actuator

Presence of limit switches

Yes

Presence of pneumatic distributor

No

Presence of electro-pneumatic positioner

No

Warranty, years

1


Dimensions and sizes of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN80-100 16 bar full bore coupling, body - stainless steel SS316, seal - PTFE, with pneumatic drive Elephant PA-DA-105 and BKV APL-210N:

Model L, mm H, mm A, mm Е, mm
DN80 169 103.5 495 200
DN100 204 122 495 200

 


Table of parts and materials of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN80-100 16 bar full bore coupling, body - stainless steel SS316, seal - PTFE, with pneumatic drive Elephant PA-DA-105 and BKV APL-210N:

№

Part name

Material

1, 6

Body

Steel 316

2, 4

Ball seal

Polytetrafluoroethylene PTFE

3

Ball

Steel 316

5

Sealing ring

Polytetrafluoroethylene PTFE

7

Stem

Steel 316

8

Stem seal

VITON

9

Stem nut

Steel 316

 


Technical parameters of pneumatic actuators Elephant PA-DA-105

Name Value
Model PA-DA-105
Construction Double-acting
Control pressure, bar 2 ÷ 8
Availability of manual doubler No


 

Dimensions and sizes of pneumatic actuators Elephant PA-DA-105

Pneumatic actuator model PA-DA-105
A, mm 495
A1, mm 461.5
B, mm 133
C, mm 109.5
D, mm 153
E1, mm 57.5
F, mm 64
G, mm 26
H, mm 80
I, mm 30
N, mm 22
E, mm 200
J, mm 102
K mm 70
L, mm М10х16
M, mm М8х13
O, mm 4
P, mm 4
S, mm M6
T, mm 24
U, mm 32


 

Table of parts and materials for pneumatic actuators Elephant PA-DA-105

№

Part name

Material

1

Indicator screw

ABS (plastic)

2

Position indicator

ABS (plastic)

3

Spring clamp

Stainless steel 304

4

Washer

Stainless steel 304

5

Outer washer

Engineering plastic

6

Adjustment screw

Stainless steel 304

7

Nut

Stainless steel 304

8

Washer

Stainless steel 304

9

Body

Extruded aluminum alloy

10

Piston

Pressure-cast aluminum alloy

11

Piston sealing ring

NBR

12

Bearing group

Engineering plastic

13

End cover sealing ring

NBR

14

End cover

Cast aluminum alloy, coated with polyester paint

15

Fastening screw

Stainless steel 304

16

Inner washer

Engineering plastic

17

Sealing ring

NBR

18

Bearing

Engineering plastic

19

Retainer

Alloy steel

20

Gear

Alloy steel

21

Bearing

Engineering plastic

22

Sealing ring

NBR

 

 

Technical parameters of limit switch units Elephant APL-210N

Name Value
Model of limit switch unit APL-210N
egree of protection of the housing, IP 65
Service life, years 10

 

 

Dimensions and sizes of limit switch units Elephant APL-210N:


Model Н, mm L, mm B, mm D, mm D1, mm M
APL-210N 77 112 88 10 5 20х1.5

 

 

Table of parts and materials of limit switch unit Elephant APL-210N:

Part

Material

Body

Cast aluminum

Indicator cap

Polyester plastic

3D indicator

ABS-plastic

Cam

Polyester plastic

Spring

Stainless steel

Screws

Stainless steel

Sealing rings

NBR

Bushing

Bronze

Grounding terminal

Stainless steel

Shaft

Stainless stee

Spezifikation
  • Country of origin
    China
  • Port opening
    full bore
  • Body material
    Stainless steel AISI 316
  • Maximum allowable temperature
    230 °C
  • Connection type
    Threaded
  • Control type
    Pneumatically actuated
  • Operating environment
    water, air, steam, mildly aggressive media, oils, industrial water, water-glycol solutions, petroleum products
  • Type of seal
    PTFE
  • Voltage
    220V
  • Explosion-proof
    no
  • Torque
    121 Nm
  • Limit switches
    have
  • Type of pneumatic actuator
    double action

Bewertungen (0)

Documentation

Zahlung & Sicherheit

Zahlungsmethoden

    Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite

    Verfügbare Varianten

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-37126DN10040 bar €680,00 Out of stock
    D160-37125DN8040 bar €470,00 3 in stock

    Häufig gestellte Fragen

    Versand

    In welche Länder liefern Sie?

    Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.

    Wie lange dauert es, bis ich meine Bestellung erhalte?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).