Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H 16 bar, full bore couplin – Valve Elephant
Elephant  |  SKU: D160-46543

Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H 16 bar, full bore coupling, stainless steel SS316, seal - PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-08 220V, with BKV APL -210N

€181,00
inkl. MwSt. Versand wird beim Checkout berechnet.

Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H 16 bar, full bore coupling, stainless steel SS316, seal - PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-08 220V, with BKV APL -210N - DN10 / 63 bar ist auf Lager und wird versandt, sobald es wieder verfügbar ist

Lieferung und Versand

Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.

Wenn Sie Fragen zu unseren Produkten, Lieferoptionen oder anderen Themen haben, zögern Sie nicht, uns zu kontaktieren.

Beschreibung

The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the valve materials. The use of ball valves as control valves is not allowed.

Elephant double-acting rotary pneumatic actuators PA-DAXXX and PA-SA-XXX rotary pneumatic actuators with return spring are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.

The pneumatic distributor is used to change the direction, start, and stop the flow of compressed air in a pneumatic system depending on the external control action.

The limit switch unit is designed for visual and electrical signaling of the end positions of the shut-off element of the valve: valve, tap or butterfly valve. It is installed on top of the surface of the pneumatic drive and connected to the DIN standard drive shaft. In a sealed box, as a rule, there are two sensors that monitor the position of the drive shaft and signal in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. Visual indication of the position can be seen on the body of the unit there is a 3D visual indicator RED - CLOSED and GREEN - OPEN.

 

 

Technical parameters of the ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN10-100 PN63/40, full bore coupling, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N:

Name Meaning
Working environment temperature, °C from -20 to 230
Application heat supply
Working environment water, air, steam, slightly aggressive environment, oils, industrial water, water-glycol solutions, petroleum products
Connection to the pipeline coupling (threaded)
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining Internal thread
Control double acting pneumatic actuator
Availability of limit switches There is
Availability of pneumatic distributor There is

 

 

Sketch Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN10-100 PN63/40, full bore coupling, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N

 

Dimensions and sizes of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN10-100 PN63/40, full bore coupling, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N:

Size D, mm L, mm B1, mm E, mm H2, mm H, mm
DN10 10 63 153 72 34 77
DN15 15 58 153 72 37 77
DN20 20 66 153 72 40 77
DN25 25 72 153 72 54 77
DN32 32 83 153 72 60 77
DN40 40 95 174 89 70 77
DN50 50 95 174 89 60 77
DN65 65 147 216 109 68 77
DN100 100 204 279 134 122 77

 

 

Sketch of parts and materials Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN10-100 PN63/40, full bore coupling, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N

 

 

Table of parts and materials Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN10-100 PN63/40, full bore coupling, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with BKV APL-210N:

Item No. Details Materials
1.6 Frame steel 316
2.4 Ball seal polytetrafluoroethylene PTFE
3 Ball steel 316
5 Sealing ring polytetrafluoroethylene PTFE
7 Stock steel 316
8 Rod seal VITON
9 Stem nut steel 316

 

 

Technical parameters of the pneumatic drive Elephant

Name Meaning
Design double acting
Working pressure, bar 6
Working environment filtered compressed air or non-aggressive gases, oils
Availability of manual backup No

 

 

Sketch of the dimensions and sizes of the pneumatic drive Elephant

 

Dimensions and sizes of the pneumatic drive Elephant:

Drive model DA-052 DA-065 DA-083 DA-105
G, mm 15 15 15 25
Mmm 80 80 80 80
N, mm 30 30 30 30
F0, mm 34 34 34 41
R, mm 20 20 20 20
B1, mm 153 174 216 279
C, mm 30 36 46 55
E, mm 72 89 109 134
J 4-M5x8 4-M6x10 4-M6x10 4-M8x12
TO 4-M6x10 4-M8x12 4-M8x12 4-M10x16
F, mm 26 26 26 26
A1, mm 108 125 152 189
D, mm 41 46 55 64
L, mm 11x11 14x14 17x17 22x22
H F03 F05 F05 F07
I F05 F07 F07 F10

 

 

Sketch of parts and materials of pneumatic drive Elephant

 

Table of parts and materials of pneumatic drive Elephant:

No. Name Quantity Material Coating
1 Frame 1 extruded aluminum hard anodized
2 Side plugs 2 cast aluminum
3 Gear 1 stainless steel nickel plated
4 Piston 2 steel/aluminum oxidation/galvanic zinc plating
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel epoxy coating
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clamp 2 stainless steel
15 Indicator 1 plastic
16 Indicator housing 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel oxidation/galvanic zinc plating
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 Sealing ring 2 NBR
23 Sealing ring 2 NBR
24 Bearing 2 stainless steel
25 Adjusting nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Sleeve 2 aluminum

 

 

Pneumatic distributor Elephant

 

Technical parameters of the pneumatic distributor Elephant

Name Meaning
Type of pneumatic distributor spool valve
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220 V
Full power, Va 4.5
Control two-way electromagnetic
Response frequency, cycles/sec 5

 

 

Sketch of the dimensions and sizes of the pneumatic distributor Elephant

 

 

Dimensions and sizes of the pneumatic distributor Elephant:

Model of pneumatic distributor 4V320-08
A, mm 71.9
B, mm 45
C, mm 94.4
D, mm 27
E, mm 69
F, mm 40
I, mm 24
K, mm 40
L, mm 188.8
M, mm 69.4
N, mm 50
O, mm 82.4
P, mm 24
S, mm 20
T, mm 6.5
U, mm 2.4
V, mm 4
H, mm 82.4

 

 

Limit Switch Block Elephant

 

Technical parameters of the limit switch block Elephant

Name Meaning
Maximum limit switch voltage, V 250
Enclosure protection rating, IP 65
Working environment temperature, °C from -40 to +80
Service life, years 10

 

 

Sketch of the dimensions and sizes of the limit switch block Elephant

 

Dimensions and sizes of the Elephant limit switch block:

Model H, mm L, mm B, mm D, mm D1, mm M
APL-210N 77 112 88 10 5 20x1.5

 

 

Passports and certificates

Data sheet for Elephant DA/SA-xxx double-acting pneumatic actuator with return springs

Spezifikation
  • Country of origin
    China
  • Port opening
    full bore
  • Body material
    Stainless steel AISI 316
  • Maximum allowable temperature
    230 °C
  • Connection type
    Threaded
  • Control type
    Pneumatically actuated
  • Operating environment
    water, air, steam, mildly aggressive media, oils, industrial water, water-glycol solutions, petroleum products
  • Type of seal
    PTFE
  • Voltage
    220V
  • Explosion-proof
    no
  • Torque
    4 Nm
  • Limit switches
    have
  • Type of pneumatic actuator
    double action

Bewertungen (0)

Documentation

Zahlung & Sicherheit

Zahlungsmethoden

    Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite

    Verfügbare Varianten

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-46543DN1063 bar €181,00 0 in stock
    D160-46552DN10040 bar €729,00 0 in stock
    D160-46544DN1563 bar €177,00 0 in stock
    D160-46545DN2063 bar €185,00 0 in stock
    D160-46546DN2563 bar €192,00 0 in stock
    D160-46547DN3263 bar €204,00 0 in stock
    D160-46558DN4063 bar €245,00 0 in stock
    D160-46548DN5063 bar €275,00 0 in stock
    D160-46550DN6540 bar €394,00 0 in stock

    Häufig gestellte Fragen

    Versand

    In welche Länder liefern Sie?

    Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.

    Wie lange dauert es, bis ich meine Bestellung erhalte?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).