Ball valves Elephant BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wa – Valve Elephant
Elephant  |  SKU: D160-49278

Ball valves Elephant BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000

€718,35
inkl. MwSt. Versand wird beim Checkout berechnet.

Ball valves Elephant BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000 - DN100 / 16 bar ist auf Lager und wird versandt, sobald es wieder verfügbar ist

Lieferung und Versand

Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.

Wenn Sie Fragen zu unseren Produkten, Lieferoptionen oder anderen Themen haben, zögern Sie nicht, uns zu kontaktieren.

Beschreibung

The ball valve is used as a shut-off valve in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve. Use of ball valves as regulating valves is not allowed.

Pneumatic rotary actuator is designed to automate the process of control of industrial valves, as well as to determine the position of the valve shut-off body.

Pneumatic distributor is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.

The limit switch unit is designed for visual and electrical signaling of the end positions of the valve shut-off body: valve, crane or disk gate. It is mounted on top of the pneumatic actuator surface and connected to the actuator shaft in DIN standard. The sealed box usually contains two sensors that monitor the position of the actuator shaft and signalize in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. Visual indication of the position can be observed on the housing of the unit there is a 3D visual indicator RED-CLOSED and GREEN-OPEN.

The air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain the pressure at the preset level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system.

 

 

Technical parameters Elephant BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000:

Nominal diameter DN, mm 15 - 100
Nominal pressure PN, bar 16
Ambient temperature, ⁰C from -50 to +200
Tightness in the gate according to class A of GOST 9544-2015
Working medium water, steam, oil products and other liquid or gaseous media neutral to the materials used
Connection to pipeline interflange
Control type manual (handle)
Ball passage full bore without constriction
Complement electric or pneumatic actuator can be installed (ISO 5211-2001)
Ball valves Elephant BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000
Elephant BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000

 

 

Dimensions and dimensions Elephant BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000:

DN d, mm D2, mm D1, mm D, mm Т, mm C, mm L, mm A, mm Е, mm I, mm В, mm С, mm
80 73 138 160 200 20 20 120 495 200 162 88 139
100 90 158 180 220 20 20 150 495 200 162 88 139

Sketch of dimensions and dimensions BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000

 

 

Parts and materials table BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000:

№ Parts Material
1 Nut Steel 304
2 Handle Steel 201+PVC
3 Washer Steel 304
4 Locking ring Steel 304
5 Thrust washer Steel 304
6 Gland washer Steel 304
7 Gland PTFE
8 Stop gasket PTFE
9 Rod Steel 316
10 Ball cover Steel 316
11 Ball Steel 316
12 Ball seal PTFE
13 Gasket PTFE
14 Body Steel 316

Parts and material sketch Elephant BV3232P-FP-Fb-ISO-H DN80-100 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4V320-08 220V, with BKV APL-210N, with BPV AFC2000

 

 

Technical parameters of pneumatic actuator PA-DA-105-1:

Name Significance
Construction double action
Rated torque, Nm 202
Angle of rotation of actuator 90°
Working pressure, bar 8
Working medium filtered compressed air or non-aggressive gases, oils

Water Butterfly Valve Elephant 316L-316L-EPDM, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-105-1

Pneumatic actuator PA-DA-105-1

 

 

Dimensions and dimensions of the pneumatic actuator PA-DA-105-1:

A, mm 495
A1, mm 461.5
B, mm 133
C, mm 109.5
D, mm 153
E, mm 57.5
F, mm 64
G, mm 26
H, mm 80
I, mm 30
N, mm 22
W, mm 200
J, mm 102
K, mm 70
L, mm М10х16
M, mm М8х13
O, mm 4
P, mm 4
S, mm M6
T, mm 24
U, mm 32

Water Butterfly Valve Elephant 316L-316L-EPDM, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-105-1

Sketch of dimensions and dimensions of pneumatic actuator PA-DA-105-1

 

 

PA-DA-105-1 air actuator parts and materials table:

№ Name Material
1 Indicator screw ABS (plastic)
2 Position indicator ABS (plastic)
3 Spring clip Stainless steel 304
4 Washer Stainless steel 304
5 External washer Engineering plastic
6 Adjustment screw Stainless steel 304
7 Nut Stainless steel 304
8 Washer Stainless steel 304
9 Body Extruded aluminum
10 Piston Aluminum, die cast
11 Piston O-ring NBR
12 Bearing group Engineering plastic
13 End cap O-ring NBR
14 End cap Cast aluminum, polyester coated
15 Fixing screw Stainless steel 304
16 Internal washer Engineering plastic
17 Sealing ring NBR
18 Bearing Engineering plastic
19 Retainer Alloy steel
20 Gear Alloy steel
21 Bearing Engineering plastic
22 Sealing ring NBR

Water Butterfly Valve Elephant 316L-316L-NBR, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA-105-1

Parts and material sketch of the PA-DA-105-1 pneumatic actuator

 


Technical parameters of pneumatic valve 4V320-08 220V:

Name meaning
Type of pneumatic valve slide valve
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220 В
Total power, Va 4.5
Control double-sided electromagnetic
Frequency of operation, cycle/sec 5

Ball valves Elephant BV3232P-FP-Fb-ISO-H 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-08 220V

Pneumatic valve 4V320-08 220V

 

 

Dimensions and dimensions of pneumatic valve 4V320-08 220V:

Pneumatic valve model 4V320-08
A, mm 71.9
B, mm 45
C, mm 94.4
D, mm 27
E, mm 69
F, mm 40
I, mm 24
K, mm 40
L, mm 188.8
M, mm 69.4
N, mm 50
O, mm 82.4
P, mm 24
S, mm 20
T, mm 6.5
U, mm 2.4
V, mm 4
H, mm 82.4

Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V

 

 

Technical parameters of limit switch unit APL-210N:

Name Value
Model of limit switch unit APL-210N
Maximum voltage of limit switch, V 250
Working environment temperature, °С -40 to +80
Service life, years 10

Limit switch unit APL-210N

 

 

Dimensions and dimensions of the APL-210N limit switch unit:

Model Н, mm L, mm B, mm D, mm D1, mm M
APL-210N 77 112 88 10 5 20х1.5

Ball valves Elephant BV3232P-FP-Fb-ISO-H 16 bar, full bore wafer, stainless steel SS316, seal - PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-08 220V, with BKV APL-210N

 

 

Main parameters of the AFC2000 air treatment unit:

Operating pressure, bar 8
Maximum pressure, bar 10
Adjustable pressure range, bar 0,5 ÷ 9
Breaking pressure, bar 15
Air connection 1/4”
Operating temperature, C -5 to +60
Filter particle size, µm 40
Oil viscosity ISO VG 32
Weight, kg 0,395
Set composition filter-moisture separator, pressure regulator, lubricator, bracket

Затворы дисковые поворотные DN.ru WBV0232E-2W-Fb Ду25-32 Ру16, корпус - алюминевый сплав, диск - нержавеющая сталь 316L, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4V320-08 220В, с БПВ AFC2000

Air treatment unit AFC2000

Spezifikation
  • Country of origin
    China
  • Port opening
    full bore
  • Body material
    Stainless steel AISI 316
  • Maximum allowable temperature
    200 °C
  • Connection type
    Compact flanged
  • Control type
    Pneumatically actuated
  • Operating environment
    water, air, steam, industrial water, oil, petroleum products
  • Type of seal
    PTFE
  • Voltage
    220V
  • Explosion-proof
    no
  • Torque
    176 Nm
  • Limit switches
    have
  • Type of pneumatic actuator
    double action

Bewertungen (0)

Documentation

Zahlung & Sicherheit

Zahlungsmethoden

    Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite

    Verfügbare Varianten

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-49278DN10016 bar €718,35 0 in stock
    D160-49279DN8016 bar €608,04 0 in stock

    Häufig gestellte Fragen

    Versand

    In welche Länder liefern Sie?

    Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.

    Wie lange dauert es, bis ich meine Bestellung erhalte?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).