Ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG DN50-150 full bore, – Valve Elephant
Elephant  |  SKU: D160-51138

Ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG DN50-150 full bore, body - stainless steel 304, welded, with Elephant PA-DA pneumatic actuator, Elephant MON reducer and YT-1000RSN pneumatic positioner

€1.353,28
inkl. MwSt. Versand wird beim Checkout berechnet.

Ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG DN50-150 full bore, body - stainless steel 304, welded, with Elephant PA-DA pneumatic actuator, Elephant MON reducer and YT-1000RSN pneumatic positioner - DN100 / 16 bar ist auf Lager und wird versandt, sobald es wieder verfügbar ist

Lieferung und Versand

Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.

Wenn Sie Fragen zu unseren Produkten, Lieferoptionen oder anderen Themen haben, zögern Sie nicht, uns zu kontaktieren.

Beschreibung

The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.

Pneumatic actuators Elephant double-acting rotary PA-DA-XXX are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.

The manual override with worm gear and reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution for the entire range of manual override tasks.

Electro-pneumatic rotary positioner is used to control rotary type pneumatic actuators by means of electric controller or control system with analog DC output signal in the range of 4 to 20 mA.

 

 

Technical parameters of Elephant BV3131P(3pc)-FP-W-ISO-H LONG DN50-150 full bore, body - stainless steel 304, welded, with Elephant PA-DA pneumatic actuator, Elephant MON reducer and YT-1000RSN pneumatic positioner

Name Meaning
Working environment temperature, °C from -20 to 180
Type of crane device two-way
Application water supply, heat supply, industry
Working environment water, steam, petroleum products, neutral media, gaseous media
Connection to the pipeline for welding
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining for welding
Control double acting pneumatic actuator
Availability of limit switches No
Availability of pneumatic distributor No
Availability of electropneumatic positioner There is
Average service life, years 5
Warranty, g. 1

 

 

Sketch of overall dimensions and sizes of ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG DN50-150 full bore, body - stainless steel 304, welded, with Elephant PA-DA pneumatic actuator, Elephant MON reducer and YT-1000RSN pneumatic positioner


Dimensions and sizes of ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG DN50-150 full bore, body - stainless steel 304, welded, with Elephant PA-DA pneumatic actuator, Elephant MON reducer and YT-1000RSN pneumatic positioner

Model L, mm H1, mm A, mm E, mm S, mm C, mm
DN50 243 133 216 109 62.5 117.5
DN65 290 133 216 109 62.5 117.5
DN80 302 133 216 109 62.5 117.5
DN100 326 180 279 134 62.5 117.5
DN125 360 180 308 157 62.5 117.5
DN150 390 195 405 174 62.5 117.5

 

 

Sketch of parts and materials of ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG DN50-150 full bore, body - stainless steel 304, welded, with Elephant PA-DA pneumatic actuator, Elephant MON reducer and YT-1000RSN pneumatic positioner

 


Table of parts and materials of ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG DN50-150 full bore, body - stainless steel 304, welded, with Elephant PA-DA pneumatic actuator, Elephant MON reducer and YT-1000RSN pneumatic positioner

Item No. Part name Material
1 Frame stainless steel 304
2 Side element (2 pcs) stainless steel 304
3 Ball stainless steel 304
4 Ball seal PTFE
5 Rod seal PTFE
6 Sleeve stainless steel 304
7 Stock stainless steel 304
8 Washer stainless steel
9 screw steel A2-70
10 Bolt steel A2-70

 

 

Pneumatic drive Elephant

 


Technical parameters of the pneumatic drive Elephant

Name Meaning
Design double acting
Control pressure, bar 2 ÷ 8

 

 

Sketch of the dimensions and sizes of the pneumatic drive Elephant

 

Dimensions and sizes of the pneumatic drive Elephant:

Model PA-DA-83 PA-DA-105 PA-DA-130 PA-DA-140
A1, mm 152 189 210 268
B1, mm 216 279 308 405
C, mm 46 55 67.5 76
D, mm 55 64 70 77
E, mm 109 134 157 174
F, mm 26 26 36 36
G, mm 15 25 25 30
H, mm F05 F07 F07 F10
I, mm F07 F10 F10 F12
J, mm 4-M6x10 4-M8x12 4-M8x12 4-M10x16
K, mm 4-M8x12 4-M10x16 4-M10x16 4-M12x20
L, mm 17x17 22x22 22x22 27x27
Mmm 80 80 80 130
N, mm 30 30 30 30
F0, mm 34 41 62 62
R, mm 20 20 30 30

 

 

Table of parts and materials of pneumatic drive Elephant:

No. Name Quantity Material Coating
1 Frame 1 extruded aluminum hard anodized
2 Side plugs 2 cast aluminum
3 Gear 1 stainless steel nickel plated
4 Piston 2 steel/aluminum oxidation/galvanic zinc plating
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel epoxy coating
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clamp 2 stainless steel
15 Indicator 1 plastic
16 Indicator housing 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel oxidation/galvanic zinc plating
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 Sealing ring 2 NBR
23 Sealing ring 2 NBR
24 Bearing 2 stainless steel
25 Adjusting nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Sleeve 2 aluminum

 

 

Electropneumatic rotary positioners Elephant YT-1000RSN

 

Technical parameters of electropneumatic rotary positioners Elephant YT-1000RSN

Name Meaning
Model of electropneumatic positioner YT-1000RSN
Input control signal, mA 4~20
Internal resistance, Ohm 250(±15)
Input pressure, bar 1.4~7
Lever stroke angle 0~90°
Compressed air connection thread 1/4″
Pressure gauge connection thread 1/8″
Cable entry G1/2″
Type of protection IP66
Compressed air consumption, l/min 3
Air flow at outlet, l/min 80
Body material aluminum casting

 

 

Sketch of dimensions and sizes of electropneumatic rotary positioners Elephant YT-1000RSN

 

 

Dimensions and sizes of electropneumatic rotary positioners Elephant YT-1000RSN:

Positioner model YT-1000RSI
A, mm 224.3
B, mm 166.5
C, mm 117.5
D, mm 132.3
E, mm 6
F, mm 122
G, mm 45
H, mm 45
I, mm 23
J, mm 27
K, mm 32.5
L, mm 35.5
M, mm 91.8
N, mm 37.2
O, mm 43.5
P, mm 26.5
Q, mm 33
R, mm 80.25
S, mm 62.5
T, mm 8
U1, mm 70
U2, mm 93
V1, mm 40
V2, mm 63
W, mm 26
X, mm 32
Y, mm 9
Z, mm 24

 

 

Manual backups Elephant MON

 

 

Technical parameters of manual backups Elephant MON

Name Meaning
Manual backup model MON
Climate performance U, UHL, T, OM
Installation method horizontal/vertical
Degree of protection, IP 67
Connection type ISO 5211

 

 

Sketch of dimensions and sizes of manual backups Elephant MON

 

Dimensions and sizes of manual backup valves Elephant MON:

Model MON2-450-T28-ISO MON3-700-T38-ISO MON4-1200-T54-ISO
b1, mm 17 22 27
N, mm 22 28 32
b2, mm 17 22 27
M, mm 18 22 30
D1, mm Ø70 Ø102 Ø102
4-M1, mm 4-M8 4-M10 4-M10
D2, mm Ø102 Ø125 Ø125
4-M2, mm 4-M10 4-M12 4-M12
E, mm 95x95 114x114 129x129
D3, mm Ø70 Ø102 Ø125
4-Ø1, mm 4-Ø8.5 4-Ø10.5 4-Ø12.5
D4, mm Ø102 Ø125 Ø140
4-Ø2, mm 4-Ø10.5 4-Ø12.5 4-Ø16.5
A, mm 125 140 188.5
B, mm 64 71 93
ØC, mm Ø110 Ø129 Ø174
F, mm 135 166 202
T, mm 62.5 70 94
Y, mm 178 212 280
H, mm 133 180 195
S, mm 56.5 68.7 84
K, mm 13 12.5 15
Ø steering wheel, mm 200 280 320

 

 

Sketch of parts and materials of manual backups Elephant MON

 

Table of parts and materials of manual backups Elephant MON:

Item No. Details Material
1 Rod for mounting pneumatic actuator steel 45
2, 8 Sealing ring EPDM
3 Locking spring spring steel
4 Top end cap aluminum alloy
5 Screw steel 304
6 Fixing bracket (main rod) steel 304
7 Frame aluminum alloy
9 Reducer cast iron VCh50
10 Transition coupling cast iron VCh40
11 Gearbox rod cast iron VCh40

Spezifikation
  • Country of origin
    China
  • Port opening
    full bore
  • Body material
    Stainless steel AISI 304
  • Maximum allowable temperature
    180 °C
  • Connection type
    For welding
  • Control type
    Pneumatically actuated
  • Operating environment
    water, steam, petroleum products, neutral media, gaseous media
  • Type of seal
    PTFE
  • Torque
    125 Nm
  • Limit switches
    no
  • Type of pneumatic actuator
    double action

Bewertungen (0)

Documentation

Zahlung & Sicherheit

Zahlungsmethoden

    Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite

    Verfügbare Varianten

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-51138DN10016 bar €1.353,28 0 in stock
    D160-51139DN100 with feedback16 bar €1.474,53 0 in stock
    D160-51141DN12516 bar €2.141,97 0 in stock
    D160-51142DN125 with feedback16 bar €2.263,23 0 in stock
    D160-51144DN15016 bar €2.958,67 0 in stock
    D160-51145DN150 with feedback16 bar €3.079,92 0 in stock
    D160-51155DN5040 bar €734,31 0 in stock
    D160-51156DN50 with feedback40 bar €855,57 0 in stock
    D160-51157DN6525 bar €880,53 0 in stock
    D160-51158DN65 with feedback25 bar €1.001,78 0 in stock
    D160-51159DN8025 bar €1.006,77 0 in stock
    D160-51160DN80 with feedback25 bar €1.128,03 0 in stock

    Häufig gestellte Fragen

    Versand

    In welche Länder liefern Sie?

    Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.

    Wie lange dauert es, bis ich meine Bestellung erhalte?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).