Ball valves Elephant BV3131P(3pc)-FP-F-ISO-H flanged, full bore, three – Valve Elephant
Elephant  |  SKU: D160-37324

Ball valves Elephant BV3131P(3pc)-FP-F-ISO-H flanged, full bore, three-piece, body - stainless steel SS304, seal - PTFE, with pneumatic actuator Elephant PA-DA 052-130 and LSU APL -510N-EX

€714,25
Versand wird beim Checkout berechnet.

Ball valves Elephant BV3131P(3pc)-FP-F-ISO-H flanged, full bore, three-piece, body - stainless steel SS304, seal - PTFE, with pneumatic actuator Elephant PA-DA 052-130 and LSU APL -510N-EX - DN100 / 16 bar ist auf Lager und wird versandt, sobald es wieder verfügbar ist

Lieferung und Versand

Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.

Wenn Sie Fragen zu unseren Produkten, Lieferoptionen oder anderen Themen haben, zögern Sie nicht, uns zu kontaktieren.

Beschreibung

The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.

Pneumatic actuators PA-DA are designed to automate the process of controlling industrial shut-off valves - valves, ball valves. Pneumatic actuators Elephant are designed for use both indoors and outdoors. All internal and external parts have an anti-corrosion coating.

The Elephant APL-510N-EX limit switch unit is an electrical device designed to open and close the working circuit and to visualize the positions of the shut-off element of pipeline valves. As a rule, a sealed box contains two mechanical switches rated for up to 250 V, which monitor the position of the actuator rod and signal in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color hemisphere of the visual indicator. If the connected pipeline valve is closed, then only the red part of the hemisphere with the inscription CLOSED is visible; if open, only the yellow part with the inscription OPEN. This visual indicator is clearly visible from afar, which simplifies the inspection of the equipment, and the color difference between the open and closed positions reduces the likelihood of erroneous perception of information. Thanks to the use of the LSU, it becomes possible to transmit information about the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics when faults are detected.

 

 


Technical data of ball valves Elephant BV3131P(3pc)-FP-F-ISO-H PA-DA APL-510N Ex

Nominal diameter DN, mm 40 – 300
Nominal pressure PN, MPa (kg/cm2) 1.6 (16)
Direction of flow bilateral
Temperature of working environment t, ⁰C -20 to +85 for NBR
-20 to +120 for EPDM
-10 to +180 for PTFE
Working environment EPDM: cold and hot water, air without impurities of oil and fat, other environments neutral to the material
PTFE: water, alkalis, acids, solvents and oxidizers
NBR: water, mineral oils, hydrocarbons,
oils, fats
Connection to the pipeline interflange

 

 

Sketch of detailing of ball valves Elephant BV3131P(3pc)-FP-F-ISO-H PA-DA APL-510N Ex

 

Materials of parts of ball valves Elephant BV3131P(3pc)-FP-F-ISO-H PA-DA APL-510N Ex

No. Name Material Quantity
1 Frame SS304 1
2 Ball valve SS304 1
3 Bolt S201 4-6
4 screw S201 6-12
5 Sealing PTFE 1
6 Stock SS304 1
7 Seal SS201 1
8 Lid WCB/CF8/CF8M 2
9 Saddle rings PTFE 2
10 Thrust washer PTFE 1
11 screw SS201 1
12 Lever SS201 1
13 Handle shell PVC 1
14 Stopper SS201 1

 

 

Sketch of ball valves Elephant BV3131P(3pc)-FP-F-ISO-H PA-DA APL-510N Ex

 

Overall and installation dimensions of ball valves Elephant BV3131P(3pc)-FP-F-ISO-H PA-DA APL-510N Ex

D.N. D1 D L L1 H
15 15 95 130 153 98
20 20 105 150 153 98
25 25 115 160 153 98
32 32 140 180 153 98
40 38 150 200 174 115
50 50 165 230 216 135
65 64 184 290 279 160
80 79 200 310 279 160
100 99 220 350 308 193

 

 

Technical characteristics of PA-DA pneumatic actuators

Design Double action
Nominal pressure PN, bar 12
Working pressure, bar 2…8
Working environment Filtered compressed air or non-aggressive gases, oils
Maximum particle diameter less than 30 µm2
Operating temperature t, ⁰C • from –20 to +80 • from –40 to +80 (low-temperature version) • from –20 to +160 (with dry air)
Adjustment range ±5° for rotation at 0° and 90°
Manual duplication There is
Position indicator open/closed
Operating environment indoors and outdoors. (All internal and external parts have anti-corrosion coating)


 

PA-DA pneumatic actuator materials sketch

 

PA-DA pneumatic actuator parts materials

No. Name Material
1 Frame extruded aluminum
2 Side plugs cast aluminum
3 Gear stainless steel
4 Piston steel/aluminum
5 Plugs stainless steel
6 Piston ring NBR
7 Springs spring steel
8 Piston bearing engineering plastic
9 Piston ring NBR
10 Plug NBR
11 Thrust ring engineering plastic
12 Ring engineering plastic
13 Washer stainless steel
14 Spring clamp stainless steel
15 Indicator plastic
16 Indicator housing plastic
17 Bearing engineering plastic
18 Cam steel
19 Bearing NBR
20 Bearing engineering plastic
21 Bearing engineering plastic
22 Sealing ring NBR
23 Sealing ring NBR
24 Bearing stainless steel
25 Adjusting nut stainless steel
26 Adjustment screw stainless steel
27 Sleeve aluminum

 

 

Characteristics of the APL-510N-EX limit switch unit

Parameter Meaning
Frame All-weather IP67/ NEMA4 4X,7,9
explosion-proof E EX d IIC T6
Compatible devices - quarter-turn pneumatic actuators;
- any actuators with a shaft rotation of 90°
Full rotation angle 90°
Cable entries 2 x NPT 3/4”
Electrical connection screw clamp terminals 8 points (0.08 – 2.5) mm2
Cable entry thread 2 x NPT 3/4”
Visual indicator type two-color hemisphere: OPEN - yellow CLOSED - red
Switches/sensors two mechanical switches two proximity sensors
Nominal voltage, V 250
Rated current, A 16
Permissible ambient temperature, °C from -20 to +66
Average resource, cycles 10,000,000
Weight, kg 1.8

Spezifikation
  • Country of origin
    China
  • Port opening
    full bore
  • Body material
    Stainless steel AISI 304
  • Maximum allowable temperature
    180 °C
  • Connection type
    Flanged
  • Control type
    Pneumatically actuated
  • Operating environment
    Water, Steam, Oil Products, Liquid Media, Neutral Media, Gaseous Media
  • Type of seal
    PTFE
  • Explosion-proof
    have
  • Torque
    235 Nm
  • Limit switches
    have
  • Type of pneumatic actuator
    double action

Bewertungen (0)

Documentation
nullLimit switch unit ELEPHANT APL-510N EX explosion-proof

Zahlung & Sicherheit

Zahlungsmethoden

    Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite

    Verfügbare Varianten

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-37324DN10016 bar €714,25 0 in stock
    D160-37332DN1540 bar €159,86 Out of stock
    D160-37331DN2040 bar €171,30 Out of stock
    D160-37330DN2540 bar €174,26 Out of stock
    D160-37329DN3240 bar €198,63 Out of stock
    D160-37328DN4040 bar €228,76 Out of stock
    D160-37327DN5040 bar €267,33 Out of stock
    D160-37326DN6525 bar €335,65 Out of stock
    D160-37325DN8025 bar €371,39 Out of stock

    Häufig gestellte Fragen

    Versand

    In welche Länder liefern Sie?

    Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.

    Wie lange dauert es, bis ich meine Bestellung erhalte?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).