Ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG, body material - Stainless steel AISI 304, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA-105-1, 4V320-10 220V, BKV APL-210N, BPV AFC2000
Ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG, body material - Stainless steel AISI 304, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA-105-1, 4V320-10 220V, BKV APL-210N, BPV AFC2000 - DN80 / 25 bar ist auf Lager und wird versandt, sobald es wieder verfügbar ist
Verfügbarkeit für Abholungen konnte nicht geladen werden
Lieferung und Versand
Lieferung und Versand
Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.
Beschreibung
Beschreibung
Ball valve Elephant BV3131P(3pc)-FP-W-ISO-H LONG is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of BV3131P(3pc)-FP-W-ISO-H LONG series valves is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) that are not aggressive to valve materials.
Pneumatic actuator Elephant PA-DA-105-1 of double action is designed for automation of control process of industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
Pneumatic valve Elephant 4V320-10 220V is used to change direction, start, stop compressed air flows in pneumatic system depending on external control action.
The Elephant APL-210N limit switch box is an electrical device designed for opening and closing of the working circuit and for visualisation of the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalise extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-coloured visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labelled CLOSED is visible; if it is open, only the yellow part labelled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the colour difference between open and closed position reduces the probability of misinterpretation of information. Thanks to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.
The AFC2000 air treatment unit is designed to clean compressed air from moisture and solid particles, remove condensate, automatically maintain pressure at a preset level, and supply lubricant from a reservoir in the compressed air stream to pneumatic system components with a large capacity range from 500 litres/minute to 10,000 litres/minute. The lubricator (oil atomiser) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic valves.
Technical parameters of ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG with double-acting pneumatic actuator PA-DA-105-1, pneumatic valve 4V320-10 220V, BCV APL-210N, BCV AFC2000:
Name | Meaning |
Working environment temperature, °C | from -20 to 180 |
Type of crane device | two-way |
Application | water supply, heat supply, industry |
Working environment | water, steam, petroleum products, neutral media, gaseous media |
Connection to the pipeline | for welding |
Water intake | No |
Type of flow section | full bore |
Control type | With pneumatic drive |
Joining | for welding |
Control | double acting pneumatic actuator |
Availability of limit switches | There is |
Availability of pneumatic distributor | There is |
Sketch of ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG with double-acting pneumatic actuator PA-DA-105-1, pneumatic valve 4V320-10 220V, ball valve APL-210N, ball valve AFC2000
Dimensions and dimensions of ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG c pneumatic actuator PA-DA-105-1 double-acting, pneumatic valve 4V320-10 220V, BCV APL-210N, BPV AFC2000:
DN, mm | L, mm | D, mm | F, mm | L1, mm | G, mm | X, mm | Y, mm |
80 | 302 | 88.9 | 153 | 495 | 77 | 88 | 162 |
100 | 326 | 114.3 | 153 | 495 | 77 | 88 | 162 |
Detail and material sketch of ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG
Table of parts and materials for ball valves Elephant BV3131P(3pc)-FP-W-ISO-H LONG:
Item No. | Part name | Material |
1 | Frame | stainless steel 304 |
2 | Side element (2 pcs) | stainless steel 304 |
3 | Ball | stainless steel 304 |
4 | Ball seal | PTFE |
5 | Rod seal | PTFE |
6 | Sleeve | stainless steel 304 |
7 | Stock | stainless steel 304 |
8 | Washer | stainless steel |
9 | screw | steel A2-70 |
10 | Bolt | steel A2-70 |
Elephant PA-DA-105-1 double-acting pneumatic actuator
Technical parameters of the PA-DA-105-1 double-acting pneumatic actuator:
Name | Meaning |
Model | PA-DA-105-1 |
Design | double acting |
Control pressure, bar | 2 ÷ 8 |
Sketch of parts and materials of Elephant PA-DA-105-1 double-acting pneumatic actuator
Parts and materials table for double-acting pneumatic actuator Elephant PA-DA-105-1:
No. | Part name | Material |
1 | Indicator screw | ABS (plastic) |
2 | Position indicator | ABS (plastic) |
3 | Spring clamp | Stainless steel 304 |
4 | Washer | Stainless steel 304 |
5 | Outer washer | Engineering plastic |
6 | Adjusting screw | Stainless steel 304 |
7 | screw | Stainless steel 304 |
8 | Washer | Stainless steel 304 |
9 | Frame | Extruded aluminum |
10 | Piston | Aluminum, die casting |
11 | Piston sealing ring | NBR |
12 | Bearing group | Engineering plastic |
13 | End Cap O-Ring | NBR |
14 | End cap | Cast aluminum coated with polyester paint |
15 | Fastening screw | Stainless steel 304 |
16 | Internal washer | Engineering plastic |
17 | Sealing ring | NBR |
18 | Bearing | Engineering plastic |
19 | Fixator | Alloy steel |
20 | Gear | Alloy steel |
21 | Bearing | Engineering plastic |
22 | Sealing ring | NBR |
Technical parameters of the Elephant 4V320-10 220V pneumatic valve
Name | Meaning |
Type of pneumatic distributor | spool valve |
Model of pneumatic distributor | 4V320-10 220V |
Working pressure, bar | 1.5 ÷ 1.8 |
Supply voltage, V | 220 V |
Response frequency, cycles/sec | 5 |
Limit switch unit Elephant APL-210N
Technical parameters of limit switch unit Elephant APL-210N
Name | Meaning |
Limit switch block model | APL-210N |
Service life, years | 10 |
Parts and materials table for limit switch unit Elephant APL-210N:
No. | Name | Material |
1 | Frame | cast aluminum |
2 | Indicator cap | polyester plastic |
3 | 3D indicator | ABC plastic |
4 | Cam | polyester plastic |
5 | Spring | stainless steel |
6 | Screws | stainless steel |
7 | Sealing rings | NBR |
8 | Sleeve | bronze |
9 | Ground terminal | stainless steel |
10 | Shaft | stainless steel |
Main parameters of the Elephant AFC2000 air treatment unit
Working pressure, bar | 8 |
Maximum pressure, bar | 10 |
Adjustable pressure range, bar | 0.5 ÷ 9 |
Destruction pressure, bar | 15 |
Air connection | 1/4" |
Operating temperature, C | from -5 to +60 |
Size of filtered particles, µm | 40 |
Oil viscosity | ISO VG 32 |
Weight, kg | 0.395 |
Kit composition | filter-moisture separator, pressure regulator, lubricator, bracket |
Spezifikation
Spezifikation
-
Country of origin
-
Body material
-
Maximum allowable temperature
-
Connection type
-
Control type
-
Operating environment
-
Applications
-
Nominal pressure
-
Type of seal
-
Locking material
-
Explosion-proof
-
Limit switches
-
Type of pneumatic actuator
-
Angle of rotation
Bewertungen (0)
Bewertungen (0)
Documentation
Documentation
Zahlung & Sicherheit
Zahlungsmethoden
Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite
Häufig gestellte Fragen
Versand
In welche Länder liefern Sie?
In welche Länder liefern Sie?
Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.
Wie lange dauert es, bis ich meine Bestellung erhalte?
Wie lange dauert es, bis ich meine Bestellung erhalte?
Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).
Returns and Refunds
How do I return a product?
How do I return a product?
Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.
How long will it take to receive my refund?
How long will it take to receive my refund?
Refunds are processed within 7 days from when we receive the item(s).