Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 16 bar/40, full b – Valve Elephant
Elephant  |  SKU: D160-46467

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 16 bar/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-08 220V, with manual Doubler MON1-250-T26-ISO, with po

€307,84
Tax included Shipping calculated at checkout.

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 16 bar/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-08 220V, with manual Doubler MON1-250-T26-ISO, with po - DN10 / 63 bar is backordered and will ship as soon as it is back in stock.

Delivery and Shipping

The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.

If you have any questions about our products, delivery options, or anything else, feel free to reach out.

Description

The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the valve materials. The use of ball valves as control valves is not allowed.

Elephant double-acting rotary pneumatic actuators PA-DAXXX and PA-SA-XXX rotary pneumatic actuators with return spring are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.

The pneumatic distributor is used to change the direction, start, and stop the flow of compressed air in a pneumatic system depending on the external control action.

The manual override with worm gear and HDM reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution for the entire range of manual override tasks.

The air preparation unit is designed to clean compressed air from droplet moisture and solid particles, remove condensate, automatically maintain pressure at a given level, and supply lubricant from the reservoir to the compressed air flow to the elements of the pneumatic system.

 

 

Technical parameters Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 PN63/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with manual override MON1-250-T26-ISO, with BP:

Name Meaning
Working environment temperature, °C from -20 to 200
Application water supply, heat supply, steam supply
Working environment water, steam, petroleum products, neutral media
Connection to the pipeline for welding
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining for welding
Control double acting pneumatic actuator
Availability of limit switches No
Availability of pneumatic distributor There is
Warranty, g. 1

 

 

Sketch Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 PN63/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with manual override MON1-250-T26-ISO, with BP

 


Dimensions and sizes Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 PN63/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with manual override MON1-250-T26-ISO, with BP:

Size D, mm L, mm B1, mm E, mm C, mm H2, mm X, mm Y, mm B, mm
DN10 10 63 153 72 120 38.9 162 139 17.2
DN15 15 65 153 72 120 40 162 139 21.3
DN20 20 75 153 72 120 43.9 162 139 26.7
DN25 25 83 153 72 120 53 162 139 33.5
DN32 32 98 153 72 120 56 162 139 42.2
DN40 40 112 174 89 120 60 162 139 48.3
DN50 50 135 174 89 120 75 162 139 60.5

 

 

Sketch of parts and materials Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 PN63/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with manual override MON1-250-T26-ISO, with BP

 


Table of parts and materials Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 PN63/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with manual override MON1-250-T26-ISO, with BP:

Item No. Details Material
1 Frame Steel SS316
2 Ball valve Steel S304/S316
3 Bolt Steel S201/S304
4 screw Steel S201/S304
5 Sealing Polytetrafluoroethylene PTFE
6 Stock Steel SS304/SS316
7 Seal Steel S201/S304
8 Sealing ring VITON
9 Lid Steel WCB/CF8/CF8M
10 Saddle rings Polymerized resin PPL
11 Thrust washer Polytetrafluoroethylene PTFE

 

 

Pneumatic drive Elephant

 

Technical parameters of the pneumatic drive Elephant

Name Meaning
Design with return springs
Working pressure, bar 6
Working environment filtered compressed air or non-aggressive gases, oils
Availability of manual backup No

 

 

Sketch of the dimensions and sizes of the pneumatic drive Elephant

 

Dimensions and sizes of the pneumatic drive Elephant:

Drive model DA-052 DA-065
G, mm 15 15
Mmm 80 80
N, mm 30 30
F0, mm 34 34
R, mm 20 20
B1, mm 153 174
C, mm 30 36
E, mm 72 89
J 4-M5x8 4-M6x10
TO 4-M6x10 4-M8x12
F, mm 26 26
A1, mm 108 125
D, mm 41 46
L 11x11 14x14
H F03 F05
I F05 F07

 

 

Sketch of parts and materials of pneumatic drive Elephant

 

Table of parts and materials of pneumatic drive Elephant:

No. Name Quantity Material Coating
1 Frame 1 extruded aluminum hard anodized
2 Side plugs 2 cast aluminum
3 Gear 1 stainless steel nickel plated
4 Piston 2 steel/aluminum oxidation/galvanic zinc plating
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel epoxy coating
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clamp 2 stainless steel
15 Indicator 1 plastic
16 Indicator housing 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel oxidation/galvanic zinc plating
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 Sealing ring 2 NBR
23 Sealing ring 2 NBR
24 Bearing 2 stainless steel
25 Adjusting nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Sleeve 2 aluminum

 

 

Pneumatic distributor Elephant

Technical parameters of the pneumatic distributor Elephant

Name Meaning
Type of pneumatic distributor spool valve
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220V
Full power, Va 4.5
Control two-way electromagnetic
Response frequency, cycles/sec 5

 

 

Sketch of the dimensions and sizes of the pneumatic distributor Elephant

 

Dimensions and sizes of the pneumatic distributor Elephant:

Model of pneumatic distributor 4V320-08
A, mm 71.9
B, mm 45
C, mm 94.4
D, mm 27
E, mm 69
F, mm 40
I, mm 24
K, mm 40
L, mm 188.8
M, mm 69.4
N, mm 50
O, mm 82.4
P, mm 24
S, mm 20
T, mm 6.5
U, mm 2.4
V, mm 4
H, mm 82.4

 

 

Manual backup Elephant

 

Technical parameters of the manual backup Elephant

Name Meaning
Climate performance U, UHL, T, OM
Installation method horizontal/vertical
Degree of protection, IP 67
Connection type ISO 5211

 

 

Sketch of dimensions and sizes of manual backup Elephant

 

Dimensions and sizes of the manual backup Elephant:

Manual backup model HDM-1
b1, mm 14
N, mm 22
b2, mm 14
M, mm 16
D1, mm 50
D2, mm 70
D3, mm 50
D4, mm 70
ØC, mm 88
C, mm 120
A, mm 90
F, mm 115
Y, mm 145
4-M1 4-M6
4-M2 4-M8
4-Ø1 4-Ø6.5
4-Ø2 4-Ø8.5
E, mm 70x70
B, mm 55
S, mm 53
K, mm 10
T, mm 145

 

 

Sketch of parts and materials of manual backup Elephant

 

Table of parts and materials of the manual backup Elephant:

Item No. Details Material
1 Rod for mounting a pneumatic actuator steel 45
2, 8 Sealing ring EPDM
3 Locking spring spring steel
4 Top end cap aluminum alloy
5 Screw steel 304
6 Fixing bracket (main rod) steel 304
7 Frame aluminum alloy
9 Reducer cast iron VCh50
10 Transition coupling cast iron VCh40
11 Gearbox rod cast iron VCh40

 

 

Air preparation unit Elephant AFC2000

 

Technical parameters of the air preparation unit Elephant AFC2000

Name Meaning
Working pressure, bar 8
Adjustable pressure range, bar 0.5 ÷ 9
Size of filtered particles, µm 40 microns
Weight, kg 0.395

 

 

Sketch of the dimensions and sizes of the air preparation unit Elephant AFC2000

 

Dimensions and sizes of the air preparation unit Elephant AFC2000:

Model BPV AFC2000
A, mm 162
B, mm 88
C, mm 139
D, mm 31
E, mm 53.5
F, mm 12
G, mm 8
H, mm 7
I, mm 13.3
J, mm 39
K, mm 5
L, mm 40
M, mm 32
N, mm 53
O, mm 29
P, mm 6
R, mm 41.5

 

 

 

Passports and certificates

Data sheet for Elephant DA/SA-xxx double-acting pneumatic actuator with return springs

Specifications
  • Country of origin
    China
  • Port opening
    full bore
  • Body material
    Stainless steel AISI 316
  • Maximum allowable temperature
    200 °C
  • Connection type
    For welding
  • Control type
    Pneumatically actuated
  • Operating environment
    water, steam, oil products, neutral media
  • Type of seal
    PTFE
  • Voltage
    220V
  • Explosion-proof
    no
  • Torque
    3 Nm
  • Limit switches
    no
  • Type of pneumatic actuator
    double action

Reviews (0)

Documentation

Payment & Security

Payment methods

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Available Variants

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-46467DN1063 bar €307,84 0 in stock
    D160-46474DN10025 bar €809,00 0 in stock
    D160-46497DN1563 bar €307,86 0 in stock
    D160-46468DN2063 bar €316,13 0 in stock
    D160-46469DN2563 bar €283,33 0 in stock
    D160-46498DN3263 bar €295,72 0 in stock
    D160-46470DN4040 bar €306,41 0 in stock
    D160-46471DN5040 bar €336,18 0 in stock
    D160-46472DN6525 bar €491,01 0 in stock
    D160-46473DN8025 bar €593,55 0 in stock

    Frequently Asked Questions

    Shipping

    What countries do you ship to?

    We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.

    How long will it take to receive my order?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).