Elephant | SKU: D160-49763

Ball valves Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON ATU AFC2000 LSU APL-510N-EX

€1.338,58

Tax included Shipping calculated at checkout.

Connection size

Pressure

Product variants

Ball valves Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON ATU AFC2000 LSU APL-510N-EX - DN100 / 16 bar is backordered and will ship as soon as it is back in stock.

Delivery and Shipping

The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.

If you have any questions about our products, delivery options, or anything else, feel free to reach out.

Description

The ball valve is used as a shut-off valve in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) not aggressive to valve materials.

PA-DA-1 pneumatic actuators are designed for automation of control process of industrial shut-off valves - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.

The MON manual doubler with worm gear and HDM reduction gearbox allows manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.

The AFC2000 air treatment unit is designed to purify compressed air from dripping moisture and solid particles, remove condensate, automatically maintain pressure at a preset level, supply lubricant from a reservoir in the compressed air stream to pneumatic system elements with a large capacity range from 500 liters/minute to 10,000 liters/minute. The lubricator (oil atomizer) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components such as pneumatic cylinders and pneumatic valves.

The limit switch unitAPL-510N-EX is an electrotechnical device designed for opening and closing of the working circuit and for visualization of the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of fault detection.

Technical parameters Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON ATU AFC2000 LSU APL-510N-EX:

Nominal diameter DN, mm	15 - 100
Nominal pressure PN, bar	16
Ambient temperature, ⁰C	from -50 to +200
Working medium	water, steam, oil products and other liquid or gaseous media neutral to the materials used
Connection to pipeline	interflange
Control type	manual (handle)
Ball passage	full bore without constriction
Complement	electric or pneumatic actuator can be installed (ISO 5211-2001)

Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON ATU AFC2000 LSU APL-510N-EX

Dimensions and dimensions Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON ATU AFC2000 LSU APL-510N-EX:

DN	d	D2	D1	D	T	C	N-MM	L	H	W	SxS	А	B	IS05211
15	15	45	65	95	2	14	4-М12	42	70	130	9x9	50	36	F03/F05
20	20	58	75	105	2	16	4-М12	48	86	130	9x9	50	36	F03/F05
25	25	68	85	115	2	16	4-М12	50	93	165	11x11	50	42	F04/F05
32	32	78	100	140	2	16	4-М16	60	101	165	11x11	50	42	F04/F05
40	36	88	110	150	3	16	4-М16	65	121	190	14x14	70	50	F05/F07
50	46	102	125	165	3	18	4-М16	80	129	190	14x14	70	50	F05/F07
65	58	122	145	185	3	18	4-М16	110	140	255	17x17	102	70	F07/F10
80	73	138	160	200	3	20	8-М16	120	157	315	17x17	102	70	F07/F10
100	90	158	180	220	3	20	8-М16	150	180	325	17x17	102	70	F07/F10

Sketch of dimensions and dimensions Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON ATU AFC2000 LSU APL-510N-EX

Parts and materials table Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON ATU AFC2000 LSU APL-510N-EX:

№	Parts	Material
1	Nut	Steel 304
2	Handle	Steel 201+PVC
3	Washer	Steel 304
4	Locking ring	Steel 304
5	Thrust washer	Steel 304
6	Gland washer	Steel 304
7	Gland	PTFE
8	Stop gasket	PTFE
9	Rod	Steel 316
10	Ball cover	Steel 316
11	Ball	Steel 316
12	Ball seal	PTFE
13	Gasket	PTFE
14	Body	Steel 316

Parts and material sketch Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON ATU AFC2000 LSU APL-510N-EX

Technical data of DA double-acting pneumatic actuators:

Type of pneumatic actuator	DA - double-acting
Nominal pressure PN, bar	12
Working pressure, bar	2...8
Working medium	filtered compressed air
Maximum particle diameter of the working medium, µm2	≤30
Ambient temperature, ⁰C	-20 to +80
Swivel angle, °	0 - 90
Swivel angle adjustment, %	±5
Position indicator	open/closed
Top connection standard	NAMUR
Air connection standard	NAMUR
Average life, cycles closed/open	70 000 (for non-aggressive media and medium pressure and temperature values)

DA pneumatic actuators double-acting rotary actuators

Dimensions and mounting dimensions of DA double-acting pneumatic actuators:

Model	A, mm	B, mm	C, mm	D, mm	E, mm	F, mm	G, mm	H, mm
DA-052	30	41,5	65,5	72	92	65	30	80
DA-065	36	47	81	88	108	72	30	80
DA-083	46	57	98,5	108,7	128,7	92	30	80
DA-105	57,5	64	122,5	133	153	109,5	30	80
DA-130	67,5	74,5	145,5	155	185	127,5	30	130
DA-140	75	77	161	172	202	137,5	30	130
DA-160	87	87	184	197	227	159	30	130
DA-210	113	113	235,5	255	285	210	30	130
DA-270	147	147	299	326	356	273	30	130
DA-300	162	174	330	350	380	312	30	130
DA-350	190	195	483	410	440	365	30	130

Model	I, mm	J, mm	M, mm	N, mm	Z, mm	d, mm	K	L
DA-052	36	50	11x11	14	147	40	M5x8	M6x10
DA-065	50	70	14x14	18	168	40	M6x10	M8x13
DA-083	50	70	17x17	21	204	40	M6x10	M8x13
DA-105	70	102	22x22	26	268	40	M8x13	M10x16
DA-130	70	102	22x22	26	301	55	M8x13	M10x16
DA-140	102	125	27x27	31	390	55	M10x16	M12x20
DA-160	102	125	27x27	31	458	55	M10x16	M12x20
DA-210	-	140	36x36	40	532	80	-	M16x25
DA-270	-	165	46x46	50	718	80	-	M20x25
DA-300	-	165	46x46	50	760	80	-	M20x25
DA-350	165	254	46x46	50	920	80	M20x25	8xM16x25

Sketch of dimensions of DA double-acting pneumatic actuators

Materials of parts for DA double-acting pneumatic actuators:

№	Part name	Material
1	Indicator screw	ABS plastic
2	Position indicator	ABS plastic
3	Spring clip	stainless steel 304
4	Metal washer	stainless steel 304
5	Pressure washer	engineering plastic
6	Housing	hard anodized extruded aluminum alloy
7	Pressure washer	engineering plastic
8	Limiter	alloy steel
9	Shaft sealing ring upper	NBR
10	Upper shaft sliding ring	engineering plastic
11	Shaft	nickel plated alloy steel
12	Shaft sliding ring lower	engineering plastic
13	Shaft O-ring lower	NBR
14	Plug	NBR
15	Seal ring of adjusting screws	NBR
16	Washer of adjusting screw	stainless steel 304
17	Lock nut of adjusting screw	stainless steel 304
18	Adjusting screw	stainless steel 304
19	Piston	die-cast aluminum alloy
20	Piston guide plate	engineering plastic
21	Piston sliding ring	engineering plastic
22	Piston O-ring	NBR
23	Spring set	spring steel
24	Cover O-ring	NBR
25	End cap	cast aluminum with polyester coating
26	Cover screw	stainless steel 304
27	Stop screw	stainless steel 304
28	Adapter	carbon steel

Material sketch of DA double-acting pneumatic actuators

Technical parameters of the handwheel MON:

Name	Value
Climatic version	U,UHL,T,OM
Degree of protection, IP	67
Connection type	ISO 5211

Manual doubler MON

Dimensions and dimensions of the handwheel MON:

Model	MON1-250-T26-ISO	MON2-450-T28-ISO	MON3-700-T38-ISO	MON4-1200-T54-ISO
b1, mm	14	17	22	27
N, mm	22	22	28	32
b2, mm	14	17	22	27
M, mm	16	18	22	30
D1, mm	Ø50	Ø70	Ø102	Ø102
4-M1, mm	4-M6	4-M8	4-M10	4-M10
D2, mm	Ø70	Ø102	Ø125	Ø125
4-M2, mm	4-M8	4-M10	4-M12	4-M12
E, mm	70x70	95x95	114x114	129x129
D3, mm	Ø50	Ø70	Ø102	Ø125
4-Ø1, mm	4-Ø6.5	4-Ø8.5	4-Ø10.5	4-Ø12.5
D4, mm	Ø70	Ø102	Ø125	Ø140
4-Ø2, mm	4-Ø8.5	4-Ø10.5	4-Ø12.5	4-Ø16.5
A, mm	90	125	140	188.5
B, mm	55	64	71	93
ØC, mm	Ø88	Ø110	Ø129	Ø174
F, mm	115	135	166	202
T, mm	44	62.5	70	94
Y, mm	145	178	212	280
H, mm	120	133	180	195
S, mm	53	56.5	68.7	84
K, mm	10	13	12.5	15
Ø hand wheel, mm	180	200	280	320

Sketch of dimensions and dimensions of the MON handwheel MON

MON handwheel materials:

№	Name	Material
1	Stem for mounting the pneumatic actuator	Steel 45
2	Sealing ring	EPDM
3	Fixing spring	Spring steel
4	Upper end cover	Aluminum alloy
5	Screw	Steel 304
6	Locking bracket (main rod)	Steel 304
7	Housing	Aluminum alloy
8	Sealing ring	EPDM
9	Gear unit	Cast iron BCh50
10	Transition coupling	Cast iron BCh40
11	Gear stem	Cast iron BCh40

Materials of the handwheel

Technical characteristics of the pneumatic distributor 4M310-08 NAMUR

Design	Spool-type
Test pressure (body strength test. Not for operation!), bar	10
Working pressure (recommended range for normal operation), bar	1.5 ÷ 8
Valve type	5/2 five-port, two-position
Working medium	purified air (40 µm filter fineness)
Operating temperature, °C	0 to +60
Actuation frequency	5 cycles per second
Manual override	yes
Protection rating/insulation class	IP65/F
Connection to pneumatic actuator	NAMUR-compliant mounting surface (VDI/VDE3845)
Body material	anodized aluminum
Effective cross-sectional area, mm2	25 (Cv = 1.4)
Exhaust port dimensions (vent to atmosphere)	2 - PT1/4”
Air inlet port size (to pneumatic valve)	G1/4”
Air outlet port size (to pneumatic actuator)	2 x Ø19.2 mm
Response time, sec	0.05
Supply voltage, V	220AC/24DC
Coil power	220VAC – 5.5 VA/24VDC – 4.8 W
Weight, kg	0.35
Average service life, cycles	10,000,000

Overall and installation dimensions of the pneumatic distributor 4M310-08 NAMUR

A	C	D	E	F	G	H	I	K	L	J	N	M
mm
40	24	28	32	40	21,5	69	45	17,5	135	29,3	40	27

Sketch of the dimensions of the pneumatic distributor 4M310-08 NAMUR

Basic materials and parts of the pneumatic distributor 4M310-08 NAMUR

№	Part Name	Material
1	Connector	Engineering plastic
2	Nut	POM + carbon steel
3	Coil	Copper
4	Control Elements	—
5	Plate	Carbon steel
6	Piston	POM
7	Control Valve Seat	Engineering plastic
8	Valve Body	Aluminum alloy
9	Spool	Aluminum alloy
10	O-Ring Seal	HNBR
11	Rear Cover	Engineering plastic
12	Filter	Synthetic material
13	Piston	POM
14	Spring	Stainless steel
15	Manual Override	Engineering plastic
16	Rear Seat	Aluminum alloy
17	Spring Seat	Aluminum alloy
18	Type C Towing Shackle	65Mn

Sketch of the dimensions of the pneumatic distributor 4M310-08 NAMUR

Characteristics of limit switch unit APL-510N-EX:

Parameter	Significance
Enclosure	all-weather IP67/ NEMA4 4X,7,9 explosion-proof E EX d IIC T6
Compatible devices	quarter-turn pneumatic actuators; - any actuators with shaft rotation by 90
Full rotation angle	90°
Cable glands	2 x NPT 3/4”
Electrical connection	screw terminals 8 points (0.08 - 2.5) mm2
Cable gland thread	2 x NPT 3/4”
Type of visual indicator	two-color hemisphere: OPEN (Open) - yellow CLOSED (Closed) - red
Switches/sensors	two mechanical switches two proximity sensors
Rated voltage, V	250
Rated current, A	16
Permissible ambient temperature, °C	-20 to +66
Average life, cycles	10 000 000
Weight, kg	1.8

Main parameters of the AFC2000 air treatment unit:

Operating pressure, bar	8
Maximum pressure, bar	10
Adjustable pressure range, bar	0,5 ÷ 9
Breaking pressure, bar	15
Air connection	1/4”
Operating temperature, C	-5 to +60
Filter particle size, µm	40
Oil viscosity	ISO VG 32
Weight, kg	0,395
Set composition	filter-moisture separator, pressure regulator, lubricator, bracket

Air treatment unit AFC2000

Passports and certificates

Data sheet for Elephant DA/SA double-acting pneumatic actuator with return springs

Specifications

Country of origin

China
Port opening

full bore
Body material

Stainless steel AISI 316
Maximum allowable temperature

200 °C
Connection type

Compact flanged
Control type

Pneumatically actuated
Operating environment

Water, Steam, Oil Products, Liquid Media, Neutral Media, Gaseous Media
Type of seal

PTFE
Voltage

24 V
Explosion-proof

have
Torque

176 Nm
Limit switches

have
Type of pneumatic actuator

double action

Reviews (0)

Documentation

Air treatment unit AFC2000 ELEPHANT

Limit switch unit ELEPHANT APL-510N EX explosion-proof

Pneumatic valve ELEPHANT 4M310-08 spool type

Handwheel ELEPHANT MONx-x-x-ISO for pneumatic actuators and quarter-turn valves

Pneumatic rotary actuator ELEPHANT PA-x-x double-acting and with return springs

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Available Variants

SKU	Connection size	Pressure	Price	Availability	Quantity
D160-49763	DN100	16 bar	€1.338,58	0 In stock	Qty
D160-49755	DN15	16 bar	€665,64	Sold out	Qty
D160-49756	DN20	16 bar	€672,07	Sold out	Qty
D160-49757	DN25	16 bar	€636,41	Sold out	Qty
D160-49758	DN32	16 bar	€719,61	Sold out	Qty
D160-49759	DN40	16 bar	€803,39	Sold out	Qty
D160-49760	DN50	16 bar	€867,56	Sold out	Qty
D160-49761	DN65	16 bar	€950,59	Sold out	Qty
D160-49762	DN80	16 bar	€1.082,86	Sold out	Qty

Frequently Asked Questions

Shipping

What countries do you ship to?

We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.

How long will it take to receive my order?

Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

Returns and Refunds

How do I return a product?

Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

How long will it take to receive my refund?

Refunds are processed within 7 days from when we receive the item(s).