Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG, body material - Sta – Valve Elephant
Elephant  |  SKU: D160-57342

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG, body material - Stainless steel AISI 316, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA, 4V320-10 220V, BKV APL-410N Ex, handwheel MON

€406,74
Tax included Shipping calculated at checkout.

Delivery and Shipping

The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.

If you have any questions about our products, delivery options, or anything else, feel free to reach out.

Description

The Elephant BV3232P(3pc)-FP-W-ISO-H LONG ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of BV3232P(3pc)-FP-W-ISO-H LONG series valves is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the valve materials.

The Elephant PA-DA double-acting pneumatic actuator is designed to automate the process of controlling industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for use both indoors and outdoors. All internal and external parts have an anti-corrosion coating.

Pneumatic distributor Elephant 4V320-10 220V is used to change the direction, start, stop the flow of compressed air in the pneumatic system depending on the external control action.

The Elephant APL-410N EX limit switch unit is an electrical device designed to open and close the working circuit and to visualize the positions of the shut-off element of pipeline valves. As a rule, a sealed box contains two mechanical switches rated for up to 250 V, which monitor the position of the actuator rod and signal in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color hemisphere of the visual indicator. If the connected pipeline valve is closed, then only the red part of the hemisphere with the inscription CLOSED is visible; if open, only the yellow part with the inscription OPEN. This visual indicator is clearly visible from afar, which simplifies the inspection of the equipment, and the color difference between the open and closed positions reduces the likelihood of erroneous perception of information. Thanks to the use of the BKV, it becomes possible to transmit information about the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics when faults are detected.

The Elephant MON manual override with worm gear and HDM reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution to the entire range of manual override tasks.

 

 

Technical parameters of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG with double-acting pneumatic actuator PA-DA, pneumatic valve 4V320-10 220V, BCV APL-410N EX, manual doubler MON:

Name Meaning
Working environment temperature, °C from -20 to 180
Type of crane device two-way
Application water supply, heat supply, industry
Working environment water, steam, petroleum products, neutral media, gaseous media
Connection to the pipeline for welding
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining for welding
Control double acting pneumatic actuator
Availability of limit switches There is
Availability of pneumatic distributor There is

 

 

Sketch of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG with double-acting pneumatic actuator PA-DA, pneumatic valve 4V320-10 220V, BCV APL-410N EX, manual override MON

 

Dimensions and sizes of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG with double-acting pneumatic actuator PA-DA, pneumatic distributor 4V320-10 220V, BKV APL-410N EX, manual backup MON:

DN, mm L, mm D, mm F, mm L1, mm E, mm G, mm
10 130 17.2 98 153 120 147
15 150 21.3 98 153 120 147
20 155 26.9 115 174 120 147
25 186 33.7 135 216 133 147
32 195 42.4 98 153 120 147
40 231 48.3 115 174 120 147
50 243 60.3 135 216 133 147
65 290 76.1 135 216 133 147
80 302 88.9 135 216 133 147
100 326 114.3 160 279 180 147
125 360 141.3 193 308 180 147
150 390 168.3 210 405 195 147

 

 

Sketch of parts and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG

 

 

Table of parts and materials for ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG:

Item No. Part name Material
1 Frame Stainless steel 316
2 Side element (2 pcs) Stainless steel 316
3 Ball Stainless steel 316
4 Ball seal PTFE
5 Rod seal PTFE
6 Sleeve stainless steel 304
7 Stock Stainless steel 316
8 Washer stainless steel
9 screw steel A2-70
10 Bolt steel A2-70

 

 

Technical parameters of the PA-DA double-acting pneumatic actuator:

Name Meaning
Model PA-DA
Design double acting
Control pressure, bar 2 ÷ 8
Availability of manual backup steering wheel

 

 

Sketch of parts and materials of the pneumatic actuator Elephant PA-DA double acting

 

Table of parts and materials of the pneumatic actuator Elephant PA-DA double acting:

No. Name Material
1 Frame extruded aluminum
2 Side plugs cast aluminum
3 Gear stainless steel
4 Piston steel/aluminum
5 Plugs stainless steel
6 Piston ring NBR
7 Springs spring steel
8 Piston bearing engineering plastic
9 Piston ring NBR
10 Plug NBR
11 Thrust ring engineering plastic
12 Ring engineering plastic
13 Washer stainless steel
14 Spring clamp stainless steel
15 Indicator plastic
16 Indicator housing plastic
17 Bearing engineering plastic
18 Cam steel
19 Bearing NBR
20 Bearing engineering plastic
21 Bearing engineering plastic
22 Sealing ring NBR
23 Sealing ring NBR
24 Bearing stainless steel
25 Adjusting nut stainless steel
26 Adjustment screw stainless steel
27 Sleeve aluminum

 

 

Technical parameters of the Elephant 4V320-108 220V pneumatic valve

Name Meaning
Type of pneumatic distributor spool valve
Model of pneumatic distributor 4V320-10 220V
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220 V
Response frequency, cycles/sec 5

 

 

Limit Switch Block Elephant APL-410N EX

 

 

Technical parameters of the limit switch unit Elephant APL-410N EX

Name Meaning
Limit switch block model APL-410N EX
Service life, years 10

 

 

Table of parts and materials of the limit switch block Elephant APL-410N EX:

Item No. Detail Material
1 Visual indicator ABS plastic / polycarbonate
2 Visual indicator cover polycarbonate
3 Label
4 Cover screws stainless steel
5 BKV housing cover aluminum die casting
6 Shaft stainless steel
7 Limit switches
8 Cams (eccentrics) polycarbonate
9 BKV case aluminum die casting
10 Terminal block
11 Ground terminal stainless steel
12 Hole (thread) for cable entry
13 bracket stainless steel

 

 

Sketch of manual backup Elephant MON

 

Technical parameters of manual backups Elephant MON:

Name Meaning
Degree of protection, IP 67
Connection type ISO 5211

 

 

Sketch of parts and materials of manual backup Elephant MON

 

Table of parts and materials of the manual backup Elephant MON:

No. Name Material
1 Rod for mounting a pneumatic actuator Steel 45
2 Sealing ring EPDM
3 Locking spring Spring steel
4 Top end cap Aluminum alloy
5 Screw Steel 304
6 Fixing bracket (main rod) Steel 304
7 Frame Aluminum alloy
8 Sealing ring EPDM
9 Reducer Cast iron VCh50
10 Transition coupling Cast iron VCh40
11 Gearbox rod Cast iron VCh40


Specifications

  • Country of origin
    China
  • Body material
    Stainless steel AISI 316
  • Maximum allowable temperature
    180 °C
  • Connection type
    For welding
  • Control type
    Pneumatic actuator
  • Operating environment
    Water, steam, petroleum products, neutral media, gaseous media
  • Applications
    Water supply, heating, industry
  • Nominal pressure
    64 bar
  • Type of seal
    PTFE / PTFE / Teflon
  • Locking material
    Stainless steel AISI 316
  • Explosion-proof
    Yes
  • Manual override
    Handwheel
  • Limit switches
    Yes
  • Type of pneumatic actuator
    double action
  • Angle of rotation
    90°

Reviews (0)

Documentation

Payment & Security

Payment methods

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Available Variants

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-57342DN1064 bar €406,74 Out of stock
    D160-57343DN1564 bar €406,74 Out of stock
    D160-57344DN2064 bar €395,82 Out of stock
    D160-57345DN2564 bar €471,84 Out of stock
    D160-57346DN3240 bar €445,57 Out of stock
    D160-57347DN4040 bar €458,69 Out of stock
    D160-57348DN5040 bar €569,05 Out of stock
    D160-57349DN6525 bar €752,63 Out of stock
    D160-57350DN8025 bar €908,17 Out of stock
    D160-57351DN10016 bar €1.318,30 Out of stock
    D160-57352DN12516 bar €2.295,87 Out of stock
    D160-57353DN15016 bar €3.314,57 Out of stock

    Frequently Asked Questions

    Shipping

    What countries do you ship to?

    We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.

    How long will it take to receive my order?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).