Elephant  |  SKU: D050-35918

Water Butterfly Valve Elephant WBV1332N-2W-Fb-H body material - Cast iron GGG50, disk material - Stainless steel 316L, seal - NBR with pneumatic actuator DA, pneumatic distributor 4M310-08 220V, limit switch block APL-210N and air filter regulator AFC2000

€212,00
Tax included Shipping calculated at checkout.

Delivery and Shipping

The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.

If you have any questions about our products, delivery options, or anything else, feel free to reach out.

Description

Butterfly valves are designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
Double-acting pneumatic rotary actuators and pneumatic rotary actuators with return springs are designed for automation of control process of industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
Pneumatic valves are used for control in pneumatic systems having NAMUR docking surface, for installation of valves through through holes in the housing.
Limit switch unit is designed for visual and electrical signaling of end positions of the valve shut-off body. It is mounted on top of the pneumatic actuator surface and connected to the actuator shaft - DIN standard. The sealed box usually contains two sensors which monitor the position of the actuator shaft and signalize the end positions. The visual indication of the position can be observed on the unit's housing. There is a 3D visual indicator RED-CLOSED and GREEN-OPEN.
AFC2000 Elephant air treatment units are designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain the pressure at a preset level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system with a wide range of throughput from 500 liters/minute to 10 000 liters/minute. The lubricator adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components such as pneumatic cylinders and pneumatic valves.

 

 

Technical parameters of water butterfly valve Elephant WBV1332N-2W-Fb-H body material - Cast iron GGG50, disk material - Stainless steel 316L, seal - NBR with pneumatic actuator DA, pneumatic distributor 4M310-08 220V, limit switch block APL-210N and air filter regulator AFC2000:

Nominal diameter DN, mm 40 - 300
Working pressure PN, bar 16
Working medium temperature t, ⁰C from -20 to +120
Operating medium water, mineral oils, hydrocarbons, oils, fats
Flow direction two-way
Control type handle
Pipeline connection interflanged
Body material cast iron GGG50
Service life, years 10


Dimensional parameters of water butterfly valve Elephant WBV1332N-2W-Fb-H body material - Cast iron GGG50, disk material - Stainless steel 316L, seal - NBR with pneumatic actuator DA, pneumatic distributor 4M310-08 220V, limit switch block APL-210N and air filter regulator AFC2000:

DN Model
electric actuator 		Dimensions
E, mm L1, mm A, mm C, mm K, mm X, mm Y, mm
40 Elephant DA-052 34 153 114 98 77 88 162
50 Elephant DA-065 43 174 131 115 77 88 162
65 Elephant DA-065 46 174 140 115 77 88 162
80 Elephant DA-083 46 216 150 135 77 88 162
100 Elephant DA-083 52 216 163 135 77 88 162
125 Elephant DA-105 56 279 178 160 77 88 162
150 Elephant DA-105 56 279 191 160 77 88 162
200 Elephant DA-130 60 308 238 193 77 88 162
250 Elephant DA-140 68 405 285 210 77 88 162
300 Elephant DA-160 78 465 315 237 77 88 162


 

Materials of water butterfly valve Elephant WBV1332N-2W-Fb-H body material - Cast iron GGG50, disk material - Stainless steel 316L, seal - NBR with pneumatic actuator DA, pneumatic distributor 4M310-08 220V, limit switch block APL-210N and air filter regulator AFC2000:

№ Name Material
1 Body cast iron GGG50
2 Seat seal NBR
3 Disk stainless steel 316L
4 Stem stainless steel AISI 416
5 Pin stainless steel AISI 420
6 Bushing PTFE
7 O-ring NBR
8 Plate carbon steel

 


Main technical characteristics of pneumatic actuators:

Design Double-acting
Nominal pressure PN, bar 12
Operating pressure, bar 2…8
Operating medium Filtered compressed air or non-aggressive gases, oils
Maximum particle diameter less than 30 µm2
Operating temperature t, ⁰C • from -20 to +80
• from -40 to +80 (low-temperature version)
• from -20 to +160 (in dry air)
Adjustment range ± 5° for rotation at 0° and 90°
Manual duplication yes
Position indicator open/closed
Operating environment indoors and outdoors. (All internal and external parts have an anti-corrosion coating)


 

Pneumatic actuator component materials Elephant DA:

№ Name Quantity Material Coating
1 Body 1 extruded aluminum hard anodized
2 Side caps 2 cast aluminum
3 Gear 1 stainless steel nickel plated
4 Piston 2 steel/aluminum oxidation/ galvanized zinc plating
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel epoxy coating
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clip 2 stainless steel
15 Indicator 1 plastic
16 Indicator body 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel oxidation/ galvanized galvanizing
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 O-ring 2 NBR
23 O-ring 2 NBR
24 Bearing 2 stainless steel
25 Adjustment nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Bushing 2 aluminum


 

Technical characteristics of pneumatic valve 4M310-08 220V:

Design spool type
Nominal pressure PN, MPa (kg/cm2) 1,2 (12)
Working pressure, bar 1,5…8
Operating medium filtered compressed air
Ambient temperature t, ⁰C from +5 to +50
Response frequency 5 cycles/second
Manual duplication yes
Degree of protection IP 65
Fastening through holes in the housing
Body material anodized aluminum
Response time 0.05 sec.


 

Main technical characteristics of Elephant APL-210N limit switch unit:

Value Execution Option
Protection All-weather IP65 IP67
Environmental temperature From -40°C to +80°C From -50°C to +80°C
Cable gland threads 2 x NPT1/2" PF1/2′′， P1/2′′M20x15, PG13.5
Terminal block 8 cells 0.08-2.6mm²
Voltage 12V, 24V, 38V, 48V, 110V, 220V, 250V
Indicator position CLOSED: red OPEN: green CLOSED: red OPEN: yellow
Sensor 2 SPDT electromechanical microswitches OMRON V151-1C25 2 NPN inductive sensors, 2 NAMUR proximity switches
External coating Polyester coating (black) red, green, yellow, blue colors
Shaft Standard shaft (17mm) Long shaft

 

 

Materials of Elephant-APL-210N limit switch unit:

№ Name Material
1 Body Cast aluminum
2 Indicator cap Polyester plastic
3 3D-indicator ABC-plastic
4 Cam Polyester plastic
5 Spring Stainless steel
6 Screws Stainless steel
7 O-rings NBR
8 Bushing Bronze
9 Grounding terminal Stainless steel
10 Shaft Stainless steel


Main technical characteristics of the AFC2000 air treatment unit:

Operating pressure, bar 8
Maximum pressure, bar 10
Adjustable pressure range, bar 0,5 ÷ 9
Fracture pressure, bar 15
Air connection 1/4"
Operating temperature, ⁰C from -5 to +60
Size of filtered particles, µm 40
Oil viscosity ISO VG 32
Weight, kg 0,395

 

 

Dimensions of the AFC2000 air supply unit:

Dimensions, mm
A B C D E F G H I J K L M N O P R
162 88 139 31 53,5 12 8 7 13,3 39 5 40 32 53 29 6 41,5

 

Specifications
  • Country of origin
    China
  • Body material
    Cast iron GGG50/EN-GJS-500-7
  • Maximum allowable temperature
    120 °C
  • Connection type
    Compact flanged
  • Control type
    Pneumatic actuator
  • Nominal pressure
    16 bar
  • Type of seal
    NBR
  • Disc material
    Stainless steel AISI 316L/1.4404
  • Voltage
    110/220V
  • Valve feedback
    Limit switches
  • Explosion-proof
    No
  • Torque
    67 Nm
  • Pneumatic actuator
    Yes
  • Manual override
    No
  • Limit switches
    Yes

Reviews (0)

Payment & Security

Payment methods

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Available Variants

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D050-35918DN5016 bar €212,00 77 in stock
    D050-35920DN8016 bar €244,00 77 in stock
    D050-35921DN10016 bar €252,00 77 in stock
    D050-35922DN12516 bar €285,00 77 in stock
    D050-35923DN15016 bar €305,00 77 in stock
    D050-35924DN20016 bar €449,00 77 in stock
    D050-35925DN25016 bar €564,00 77 in stock
    D050-35926DN30016 bar €1.279,00 77 in stock
    D050-35917DN4016 bar €194,00 77 in stock
    D050-35919DN6516 bar €220,00 77 in stock

    Frequently Asked Questions

    Shipping

    What countries do you ship to?

    We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.

    How long will it take to receive my order?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).