Water Butterfly valves Elephant WBV3131S-2W-W-H, body material - stain – Valve Elephant
Elephant  |  SKU: D050-68490

Water Butterfly valves Elephant WBV3131S-2W-W-H, body material - stainless steel AISI 304, seal - Silicon, with pneumatic actuator PA-SA, pneumatic distributor 4V320-10 220V, LSU APL-510N EX, ATU AFC2000

€284,93
Versand wird beim Checkout berechnet.

Lieferung und Versand

Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.

Wenn Sie Fragen zu unseren Produkten, Lieferoptionen oder anderen Themen haben, zögern Sie nicht, uns zu kontaktieren.

Beschreibung

Butterfly valves are designed for use as shut-off or regulating valves for controlling flows in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries. Operating principle: The valves are opened and closed by turning the disk by 90°. Opening is performed by turning the handle counterclockwise, closing - clockwise.
Pneumatic Elephant pneumatic double-acting rotary actuators PA-DA-XXX and pneumatic rotary actuators with return spring PA-SA-XXX are designed for automation of industrial valves control process with maximum torque up to 2128 Nm.
Pneumatic valves are used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.
Limit switch unit is an electrical device designed for opening and closing of the working circuit and for visualization of the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. The use of limit switch units makes it possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.
Air treatment unit is designed to purify compressed air from moisture droplets and solid particles, remove condensate, automatically maintain pressure at the set level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system.

 

 

 

Technical characteristics of water butterfly valves Elephant WBV3131S-2W-W-H, body material - stainless steel AISI 304, seal - Silicon, with pneumatic actuator PA-SA, pneumatic distributor 4V320-10 220V, limit switch unit APL-510N EX, ATU AFC2000:

Characteristic

Value

Type of valve

Rotary disc

Diameter

15–100 mm

Nominal pressure

10 bar

Working medium temperature

From -50 to +180°C

Application

Food industry

Type of connection

Under weld

Type of control

Pneumatic actuator

Tightness class

A

Warranty

12 months

 

Technical data of pneumatic actuators Elephant with return springs PA-SA-XXX:

Characteristic

Value

Type of pneumatic actuator

With return springs

Actuator torque

14–30 Nm

Nominal pressure

12 bar

Operating pressure

2...8 bar

Maximum particle diameter

Less than 30 µm²

Working medium

Filtered compressed air or non-aggressive gases, oils

Adjustment range

±5° for rotation at 0° and 90°

Air supply

G1/4"

Working medium temperature

From -20 to +80 °C

 


Technical characteristics of pneumatic valves Elephant 4V320-10 220V:

Characteristics Value
Pneumatic valve model 4V320-10 220V
Supply voltage 220V
Type of pneumatic valve Spool
Nominal pressure 12 bar
Working pressure 1.5...1.8 bar
Ambient temperature From -5 to +50 ⁰C
Working medium Purified air (purification fineness 40 µm)
Response frequency 5 cycles/s
Protection class IP65
Control Two-way electromagnetic
Body material Aluminum alloy and technopolymer
Response time 0.05 s
Diameter of working channels 3/8"


 

Technical characteristics of limit switch units Elephant APL-510N EX:

Characteristic

Value

Model of limit switch unit

APL-510N EX

Protection

All-weather IP67, explosion-proof E EX d IIC T6

Ambient temperature

From -20°C to +66°C

Cable gland thread

2 x NPT 3/4”

Terminal block

8 cells 0.08-2.5mm2

Nominal current

16 A

Nominal voltage

250 V

Switches/sensors

Two mechanical switches / two proximity sensors

Full rotation angle

90°

Average service life

10 000 000 cycles

 


Technical characteristics of air treatment units Elephant AFC2000:

Characteristic

Value

Operating pressure

8 bar

Maximum pressure

10 bar

Adjustable pressure range

0.5...9 bar

Fracture pressure

15 bar

Working temperature

From -5°C to +60°C

Air connection

1/4"

Particle size filtration

40 µm

Oil viscosity

ISO VG 32

 

 

Overall and installation sizes of water butterfly valves Elephant WBV3131S-2W-W-H, body material - stainless steel AISI 304, seal - Silicon, with pneumatic actuator PA-SA, pneumatic distributor 4V320-10 220V, limit switch unit APL-510N EX, ATU AFC2000:

Diameter D, mm t, mm D1, mm A, mm H, mm J, mm K, mm
DN15 18 1.5 78 50 86 126 8x8
DN20 23 1.5 78 50 86 126 8x8
DN25 29 1.5 78 50 86 126 8x8
DN32 35 1.5 86 50 90 126 8x8
DN40 41 1.5 90 50 92 126 8x8
DN50 53 1.5 106 52 104 133 10x10
DN65 70 2.0 124 56 113 144 10x10
DN80 85 2.0 139 60 123.5 160 10x10
DN100 104 2.0 159 64 133.5 160 10x10

 

 

Dimensions and mounting sizes of Elephant rotary actuators with return springs PA-SA-XXX:

Model A, mm B, mm C, mm D, mm E, mm F, mm G, mm M, mm N, mm O, mm P, mm
PA-DA(SA)-052 108 153 30 41 72 26 15 80 30 34 20
PA-DA(SA)-065 125 174 36 46 89 26 15 80 30 34 20
PA-DA(SA)-083 152 216 46 55 109 26 15 80 30 34 20
PA-DA(SA)-105 189 279 55 64 134 26 25 80 30 41 20
PA-DA(SA)-130 210 308 67.5 70 157 36 25 80 30 62 30
PA-DA(SA)-140 268 405 76 77 174 36 30 130 30 62 30
PA-DA(SA)-160 310 465 87.5 87.5 199 38 30 130 30 62 30
PA-DA(SA)-210 390 542 113 113 257 38 40 130 30 79 30
PA-DA(SA)-270 510 722 146 146 333 38 52 130 30 79 30

 

 

Overall and installation sizes of pneumatic valves Elephant 4V320-10 220V:

A, mm 71.9
B, mm 45
C, mm 94.4
D, mm 27
E, mm 69
F, mm 40
H, mm 82.4
I, mm 24
K, mm 40
L, mm 188.8
M, mm 69.4
N, mm 50
O, mm 82.4
P, mm 24
S, mm 20
T, mm 6.5
U, mm 2.4
V, mm 4

 

 

Dimensions and installation sizes of limit switch units Elephant APL-510N EX:

Model APL-510N EX
A, mm 118
B, mm 118
C, mm 138,4
D, mm 17
E, mm 19
F, mm 7
G, mm 3
H, mm 4
I, mm 59
J, mm 59
K, mm 59
L, mm 59
M, mm 121,4
Ød1, mm 50
Ød2, mm 5

 


Dimensions and sizes of air treatment unit Elephant AFC2000:

Model AFC2000
A, mm 162
B, mm 88
C, mm 139
D, mm 31
E, mm 53.5
F, mm 12
G, mm 8
H, mm 7
I, mm 13.3
J, mm 39
K, mm 5
L, mm 40
M, mm 32
N, mm 53
O, mm 29
P, mm 6
R, mm 41.5


 

Materials of water butterfly valves Elephant WBV3131S-2W-W-H, body material - stainless steel AISI 304, seal - Silicon, with pneumatic actuator PA-SA, pneumatic distributor 4V320-10 220V, limit switch unit APL-510N EX, ATU AFC2000:

№

Part name

Material

1

Body

Stainless steel 304

2

Swivel unit

Stainless steel 304

3

Disc

Stainless steel 304

4

Seat seal

Silicon

5

Nut

Steel A2~70

6

Bolt

Steel A2~70

7

Plug

Plastic ABS

 

 

Construction of pneumatic rotary actuators Elephant with return springs PA-SA-XXX:

№

Name

Quantity

Material

Coating

1

Body

1

Extruded aluminum

Hard anodized

2

Side plugs

2

Cast aluminum

-

3

Gear

1

Stainless steel

Nickel-plated

4

Piston

2

Steel/Aluminum

Oxidation/galvanized

5

Plugs

8

Stainless steel

-

6

Piston ring

2

NBR

-

7

Springs

0–12

Spring steel

Epoxy coating

8

Piston bearing

2

Engineering plastic

-

9

Piston ring

2

NBR

-

10

Plug

2

NBR

-

11

Thrust ring

2

Engineering plastic

-

12

Ring

1

Engineering plastic

-

13

Washer

1

Stainless steel

-

14

Spring clip

2

Stainless steel

-

15

Indicator

1

Plastic

-

16

Indicator body

1

Plastic

-

17

Bearing

1

Engineering plastic

-

18

Cam

1

Steel

Oxidation/ galvanized steel

19

Bearing

1

NBR

-

20

Bearing

1

Engineering plastic

-

21

Bearing

1

Engineering plastic

-

22

Sealing ring

2

NBR

-

23

Sealing ring

2

NBR

-

24

Bearing

2

Stainless steel

-

25

Adjustment nut

2

Stainless steel

-

26

Adjustment screw

2

Stainless steel

-

27

Bushing

2

Aluminum

-

 

Spezifikation
  • Country of origin
    China
  • Body material
    stainless steel AISI 304
  • Maximum allowable temperature
    180 °C
  • Connection type
    for welding
  • Control type
    Pneumatic actuator
  • Operating environment
    Water, Steam, Neutral Media
  • Applications
    Food Industry
  • Type of seal
    Silicon
  • Disc material
    stainless steel AISI 304
  • Manual override
    Hexagon
  • Limit switches
    Yes
  • Type of pneumatic actuator
    with return springs

Bewertungen (0)

Documentation
nullAir treatment unit AFC2000 ELEPHANT
nullLimit switch unit ELEPHANT APL-510N EX explosion-proof
nullPneumatic valve ELEPHANT 4V320-8 or 10 AC220V

Zahlung & Sicherheit

Zahlungsmethoden

    Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite

    Verfügbare Varianten

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D050-68490DN1510 bar €284,93 Out of stock
    D050-68491DN2010 bar €285,37 Out of stock
    D050-68492DN2510 bar €285,52 Out of stock
    D050-68493DN3210 bar €285,81 Out of stock
    D050-68494DN4010 bar €287,54 Out of stock
    D050-68495DN5010 bar €298,89 Out of stock
    D050-68496DN6510 bar €331,22 Out of stock
    D050-68497DN8010 bar €345,41 Out of stock
    D050-68498DN10010 bar €361,05 Out of stock

    Häufig gestellte Fragen

    Versand

    In welche Länder liefern Sie?

    Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.

    Wie lange dauert es, bis ich meine Bestellung erhalte?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).