Water Butterfly Valve Elephant WBV0232E-2W-Fb-H, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, handwheel MON-065, 4V320-08 220V, handwheel MON, BPV AFC2000

The butterfly valve is designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.

Pneumatic double-acting rotary actuators PA-DAXXX and pneumatic rotary actuators with return spring PA-SA-XXX are designed for automation of industrial valve control process with maximum torque up to 2128 Nm.

The pneumatic valve is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.

The HDM worm gear manual doubleturn actuator with reduction gearbox allows manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.

The air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain the pressure value at a preset level, supply lubricant from the reservoir in the compressed air flow to the pneumatic system elements.

Technical parameters of Elephant WBV0232E-2W-Fb-H, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, handwheel MON-065, 4V320-08 220V, handwheel MON, BPV AFC2000:

Butterfly valves WBV0232E-2W-Fb-H, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, handwheel MON-065, 4V320-08 220V, handwheel MON, BPV AFC2000

Dimensions and dimensions of Elephant WBV0232E-2W-Fb-H, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, handwheel MON-065, 4V320-08 220V, handwheel MON, BPV AFC2000:

DN	B, mm	L, mm	H2, mm	E, mm	B1, mm	C, mm	X, mm	Y, mm
25	93	36	44.5	26	125	44	162	139
32	93	36	44.5	26	125	44	162	139

Sketch Butterfly valves WBV0232E-2W-Fb-H, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, handwheel MON-065, 4V320-08 220V, handwheel MON, BPV AFC2000

 

 

Materials of parts Elephant WBV0232E-2W-Fb-H, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, handwheel MON-065, 4V320-08 220V, handwheel MON, BPV AFC2000:

№ п/п	Part	Material
1	Body	Cast iron GGG50
2	Disk	High-strength cast iron
3	Seat seal	EPDM
4	Upper stem	AISI 420 steel
5	Lower stem	AISI 420 steel
6,11	Retaining ring	AISI 201 steel
7	Duster	NBR
8	Stem gasket	NBR
9	Shaft gasket	AISI 201 steel
10	Plug	Plastic

Sketch of parts and materials Butterfly valves WBV0232E-2W-Fb-H, body material - aluminum alloy, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, handwheel MON-065, 4V320-08 220V, handwheel MON, BPV AFC2000

 

 

Technical data of PA-DA pneumatic actuators:

Design	Double action
Nominal pressure PN, bar	12
Working pressure, bar	2...8
Working medium	Filtered compressed air or non-aggressive gases, oils
Maximum particle diameter	less than 30 µm2
Operating temperature t, ⁰C	- 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air)
Adjustment range	± 5 ° for rotation at 0 ° and 90 °
Manual override	is
Position indicator	open/closed
Operating environment	indoors and outdoors. (All internal and external parts are anti-corrosion coated)

PA-DA pneumatic actuator

 

 

PA-DA pneumatic actuator component materials:

№	Name	Material
1	Enclosure	extruded aluminum
2	Side plugs	cast aluminum
3	Gear	stainless steel
4	Piston	steel/aluminum
5	Plugs	stainless steel
6	Piston ring	NBR
7	Springs	spring steel
8	Piston bearing	engineering plastic
9	Piston ring	NBR
10	Plug	NBR
11	Thrust ring	engineering plastic
12	Ring	engineering plastic
13	Washer	stainless steel
14	Spring clip	stainless steel
15	Indicator	plastic
16	Indicator housing	plastic
17	Bearing	engineering plastic
18	Cam	steel
19	Bearing	NBR
20	Bearing	engineering plastic
21	Bearing	engineering plastic
22	Sealing ring	NBR
23	Sealing ring	NBR
24	Bearing	stainless steel
25	Adjustment nut	stainless steel
26	Adjustment screw	stainless steel
27	Sleeve	aluminum

Parts and material sketch of the PA-DA pneumatic actuator

 

 

Technical parameters of pneumatic valve 4V320-08 220V:

Name	meaning
Type of pneumatic valve	slide valve
Working pressure, bar	1.5 ÷ 1.8
Supply voltage, V	220 В
Total power, Va	4.5
Control	double-sided electromagnetic
Frequency of operation, cycle/sec	5

Pneumatic valve 4V320-08 220V

 

 

Dimensions and dimensions of pneumatic valve 4V320-08 220V:

Pneumatic valve model	4V320-08
A, mm	71.9
B, mm	45
C, mm	94.4
D, mm	27
E, mm	69
F, mm	40
I, mm	24
K, mm	40
L, mm	188.8
M, mm	69.4
N, mm	50
O, mm	82.4
P, mm	24
S, mm	20
T, mm	6.5
U, mm	2.4
V, mm	4
H, mm	82.4

Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V

 

Technical parameters of the handwheel:

Name	Value
Climatic version	U,UHL,T,OM
Degree of protection, IP	67
Connection type	ISO 5211

Manual doubler

 

 

Dimensions and dimensions of the handwheel:

Manual doubler model	HDM-1
b1, mm	14
N, mm	22
b2, mm	14
M, mm	16
D1, mm	50
D2, mm	70
D3, mm	50
D4, mm	70
ØC, mm	88
C, mm	120
А, mm	90
F, mm	115
Y, mm	145
4-M1	4-M6
4-M2	4-M8
4-Ø1	4-Ø6.5
4-Ø2	4-Ø8.5
E, mm	70х70
B, mm	55
S, mm	53
K, mm	10
T, mm	145

Sketch of the dimensions and dimensions of the handwheel

 

 

HDM handwheel materials:

№	Name	Material
1	Stem for mounting the pneumatic actuator	Steel 45
2	Sealing ring	EPDM
3	Fixing spring	Spring steel
4	Upper end cover	Aluminum alloy
5	Screw	Steel 304
6	Locking bracket (main rod)	Steel 304
7	Housing	Aluminum alloy
8	Sealing ring	EPDM
9	Gear unit	Cast iron BCh50
10	Transition coupling	Cast iron BCh40
11	Gear stem	Cast iron BCh40

Sketch of parts and materials of the handwheel doubler

Main parameters of the AFC2000 air treatment unit:

Air treatment unit AFC2000