Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 16 bar/40, full b – Valve Elephant
Elephant  |  SKU: D160-46451

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 16 bar/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-08 220V, with manual Doubler MON1-250-T26-ISO

€271,44
inkl. MwSt. Versand wird beim Checkout berechnet.

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 16 bar/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-08 220V, with manual Doubler MON1-250-T26-ISO - DN10 / 63 bar ist auf Lager und wird versandt, sobald es wieder verfügbar ist

Lieferung und Versand

Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.

Wenn Sie Fragen zu unseren Produkten, Lieferoptionen oder anderen Themen haben, zögern Sie nicht, uns zu kontaktieren.

Beschreibung

The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the valve materials. The use of ball valves as control valves is not allowed.

Elephant double-acting rotary pneumatic actuators PA-DAXXX and PA-SA-XXX rotary pneumatic actuators with return spring are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.

The pneumatic distributor is used to change the direction, start, and stop the flow of compressed air in a pneumatic system depending on the external control action.

The manual override with worm gear and HDM reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution for the entire range of manual override tasks.

 

 

Technical parameters of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 PN63/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with manual override MON1-250-T26-ISO:

Name Meaning
Working environment temperature, °C from -20 to 200
Application water supply, heat supply, steam supply
Working environment water, steam, petroleum products, neutral media
Connection to the pipeline for welding
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining for welding
Control double acting pneumatic actuator
Availability of limit switches No
Availability of pneumatic distributor There is
Warranty, g. 1

 

 

Sketch Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 PN63/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with manual override MON1-250-T26-ISO

 


Dimensions and sizes of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 PN63/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with manual override MON1-250-T26-ISO:

Size D, mm L, mm B1, mm E, mm C, mm B, mm H2, mm
DN10 10 63 153 72 120 17.2 38.9
DN15 15 65 153 72 120 21.3 40
DN20 20 75 153 72 120 26.7 43.9
DN25 25 83 153 72 120 33.5 53
DN32 32 98 153 72 120 42.2 56
DN40 40 112 174 89 120 48.3 60
DN50 50 135 174 89 120 60.5 75

 

 

Sketch of parts and materials Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 PN63/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with manual override MON1-250-T26-ISO

 


Table of parts and materials Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H DN10-50 PN63/40, full bore for welding, stainless steel SS316, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic distributor 4V320-08 220V, with manual override MON1-250-T26-ISO:

Item No. Details Material
1 Frame Steel SS316
2 Ball valve Steel S304/S316
3 Bolt Steel S201/S304
4 screw Steel S201/S304
5 Sealing Polytetrafluoroethylene PTFE
6 Stock Steel SS304/SS316
7 Seal Steel S201/S304
8 Sealing ring VITON
9 Lid Steel WCB/CF8/CF8M
10 Saddle rings Polymerized resin PPL
11 Thrust washer Polytetrafluoroethylene PTFE

 

 

Pneumatic drive Elephant

 

Technical parameters of the pneumatic drive Elephant

Name Meaning
Design with return springs
Working pressure, bar 6
Working environment filtered compressed air or non-aggressive gases, oils
Availability of manual backup No

 

 

Sketch of the dimensions and sizes of the pneumatic drive Elephant

 

Dimensions and sizes of the pneumatic drive Elephant:

Drive model DA-052 DA-065
G, mm 15 15
Mmm 80 80
N, mm 30 30
F0, mm 34 34
R, mm 20 20
B1, mm 153 174
C, mm 30 36
E, mm 72 89
J 4-M5x8 4-M6x10
TO 4-M6x10 4-M8x12
F, mm 26 26
A1, mm 108 125
D, mm 41 46
L 11x11 14x14
H F03 F05
I F05 F07

 

 

Sketch of parts and materials of pneumatic drive Elephant

 

Table of parts and materials of pneumatic drive Elephant:

No. Name Quantity Material Coating
1 Frame 1 extruded aluminum hard anodized
2 Side plugs 2 cast aluminum
3 Gear 1 stainless steel nickel plated
4 Piston 2 steel/aluminum oxidation/galvanic zinc plating
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel epoxy coating
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clamp 2 stainless steel
15 Indicator 1 plastic
16 Indicator housing 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel oxidation/galvanic zinc plating
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 Sealing ring 2 NBR
23 Sealing ring 2 NBR
24 Bearing 2 stainless steel
25 Adjusting nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Sleeve 2 aluminum

 

 

Pneumatic distributor Elephant

Technical parameters of the pneumatic distributor Elephant

Name Meaning
Type of pneumatic distributor spool valve
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220V
Full power, Va 4.5
Control two-way electromagnetic
Response frequency, cycles/sec 5

 

 

Sketch of the dimensions and sizes of the pneumatic distributor Elephant

 

Dimensions and sizes of the pneumatic distributor Elephant:

Model of pneumatic distributor 4V320-08
A, mm 71.9
B, mm 45
C, mm 94.4
D, mm 27
E, mm 69
F, mm 40
I, mm 24
K, mm 40
L, mm 188.8
M, mm 69.4
N, mm 50
O, mm 82.4
P, mm 24
S, mm 20
T, mm 6.5
U, mm 2.4
V, mm 4
H, mm 82.4

 

 

Manual backup Elephant

 

 

Technical parameters of the manual backup Elephant

Name Meaning
Climate performance U, UHL, T, OM
Installation method horizontal/vertical
Degree of protection, IP 67
Connection type ISO 5211

 

 

Sketch of dimensions and sizes of manual backup Elephant

 


Dimensions and sizes of the manual backup Elephant:

Manual backup model HDM-1
b1, mm 14
N, mm 22
b2, mm 14
M, mm 16
D1, mm 50
D2, mm 70
D3, mm 50
D4, mm 70
ØC, mm 88
C, mm 120
A, mm 90
F, mm 115
Y, mm 145
4-M1 4-M6
4-M2 4-M8
4-Ø1 4-Ø6.5
4-Ø2 4-Ø8.5
E, mm 70x70
B, mm 55
S, mm 53
K, mm 10
T, mm 145

 

 

Sketch of parts and materials of manual backup Elephant

 

Table of parts and materials of the manual backup Elephant:

Item No. Details Material
1 Rod for mounting a pneumatic actuator steel 45
2, 8 Sealing ring EPDM
3 Locking spring spring steel
4 Top end cap aluminum alloy
5 Screw steel 304
6 Fixing bracket (main rod) steel 304
7 Frame aluminum alloy
9 Reducer cast iron VCh50
10 Transition coupling cast iron VCh40
11 Gearbox rod cast iron VCh40

 

Passports and certificates

Data sheet for Elephant DA/SA-xxx double-acting pneumatic actuator with return springs

Spezifikation
  • Country of origin
    China
  • Port opening
    full bore
  • Body material
    Stainless steel AISI 316
  • Maximum allowable temperature
    200 °C
  • Connection type
    For welding
  • Control type
    Pneumatically actuated
  • Operating environment
    water, steam, oil products, neutral media
  • Type of seal
    PTFE
  • Voltage
    220V
  • Explosion-proof
    no
  • Torque
    3 Nm
  • Limit switches
    no
  • Type of pneumatic actuator
    double action

Bewertungen (0)

Documentation

Zahlung & Sicherheit

Zahlungsmethoden

    Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite

    Verfügbare Varianten

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-46451DN1063 bar €271,44 0 in stock
    D160-46458DN10025 bar €772,60 0 in stock
    D160-46493DN1563 bar €271,46 0 in stock
    D160-46452DN2063 bar €279,73 0 in stock
    D160-46453DN2563 bar €246,93 0 in stock
    D160-46494DN3263 bar €259,32 0 in stock
    D160-46454DN4040 bar €270,01 0 in stock
    D160-46455DN5040 bar €299,77 0 in stock
    D160-46456DN6525 bar €454,61 0 in stock
    D160-46457DN8025 bar €557,15 0 in stock

    Häufig gestellte Fragen

    Versand

    In welche Länder liefern Sie?

    Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.

    Wie lange dauert es, bis ich meine Bestellung erhalte?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).