Ball valves Elephant BV3232P-FP-Fb-ISO-H, body material - Stainless st – Valve Elephant
Elephant  |  SKU: D160-56560

Ball valves Elephant BV3232P-FP-Fb-ISO-H, body material - Stainless steel AISI 316, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA, 4V320-10 220V, BKV APL-210N, BPV AFC2000

€248,74
inkl. MwSt. Versand wird beim Checkout berechnet.

Lieferung und Versand

Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.

Wenn Sie Fragen zu unseren Produkten, Lieferoptionen oder anderen Themen haben, zögern Sie nicht, uns zu kontaktieren.

Beschreibung

Ball valve Elephant BV3232P-FP-Fb-ISO-H is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of BV3232P-FP-Fb-ISO-H series valves is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) that are not aggressive to valve materials.

Double-acting pneumatic actuator Elephant PA-DA is designed for automation of control process of industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.

Pneumatic valve Elephant 4V320-10 220V is used to change direction, start, stop compressed air flows in pneumatic system depending on external control action.

The Elephant APL-210N limit switch box is an electrical device designed for opening and closing of the working circuit and for visualisation of the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalise extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-coloured visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labelled CLOSED is visible; if it is open, only the yellow part labelled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the colour difference between open and closed position reduces the probability of misinterpretation of information. Thanks to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.

The AFC2000 air treatment unit is designed to clean compressed air from moisture and solid particles, remove condensate, automatically maintain pressure at a preset level, supply lubricant from a reservoir in the compressed air stream to pneumatic system components with a large capacity range from 500 litres/minute to 10,000 litres/minute. The lubricator (oil atomiser) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic valves.

 

 

Technical parameters of ball valves Elephant BV3232P-FP-Fb-ISO-H with double-acting pneumatic actuator PA-DA, pneumatic valve 4V320-10 220V, BCV APL-210N, BCV AFC2000:

Name Meaning
Nominal pressure PN, bar 16
Type of crane device two-way
Application heat supply
Working environment water, air, steam, oils, industrial water, petroleum
Connection to the pipeline interflange
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining interflange
Control double acting pneumatic actuator
Availability of limit switches There is
Availability of pneumatic distributor There is

 

 

Sketch of ball valves Elephant BV3232P-FP-Fb-ISO-H with double-acting pneumatic actuator PA-DA, pneumatic valve 4V320-10 220V, BCV APL-210N, BCV AFC2000

 

Dimensions and dimensions of ball valves Elephant BV3232P-FP-Fb-ISO-H with double-acting pneumatic actuator PA-DA, pneumatic valve 4V320-10 220V, BCV APL-210N, BPV AFC2000:

DN, mm L, mm D, mm F, mm L1, mm G, mm X, mm Y, mm
15 42 95 98 153 77 88 162
20 48 105 98 153 77 88 162
25 50 115 98 153 77 88 162
32 60 140 98 153 77 88 162
40 65 150 115 174 77 88 162
50 80 165 115 174 77 88 162
65 110 185 135 216 77 88 162
80 120 200 135 216 77 88 162
100 150 220 135 216 77 88 162

 

 

Detail and material sketch of ball valves Elephant BV3232P-FP-Fb-ISO-H

 

 

Table of parts and materials for ball valves Elephant BV3232P-FP-Fb-ISO-H:

No. Name Material
1 screw Steel 304
2 Pad PTFE
3 Thrust gasket PTFE
4 Stock Steel 316
5 Ball cap Steel 316
6 Frame Steel 316
7 Ball seal PTFE
8 Ball Steel 316

 

 

Technical parameters of the PA-DA double-acting pneumatic actuator:

Name Meaning
Model PA-DA
Design double acting
Control pressure, bar 2 ÷ 8

 

 

Sketch of parts and materials of Elephant PA-DA double-acting pneumatic actuator

 

 

Parts and materials table for double-acting pneumatic actuator Elephant PA-DA:

No. Name Material
1 Frame extruded aluminum
2 Side plugs cast aluminum
3 Gear stainless steel
4 Piston steel/aluminum
5 Plugs stainless steel
6 Piston ring NBR
7 Springs spring steel
8 Piston bearing engineering plastic
9 Piston ring NBR
10 Plug NBR
11 Thrust ring engineering plastic
12 Ring engineering plastic
13 Washer stainless steel
14 Spring clamp stainless steel
15 Indicator plastic
16 Indicator housing plastic
17 Bearing engineering plastic
18 Cam steel
19 Bearing NBR
20 Bearing engineering plastic
21 Bearing engineering plastic
22 Sealing ring NBR
23 Sealing ring NBR
24 Bearing stainless steel
25 Adjusting nut stainless steel
26 Adjustment screw stainless steel
27 Sleeve aluminum

 

 

Technical parameters of pneumatic valve Elephant 4V320-10 220V

Name Meaning
Type of pneumatic distributor spool valve
Model of pneumatic distributor 4V320-08 220V
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220 V
Response frequency, cycles/sec 5

 

 

Limit switch unit Elephant APL-210N

 

Technical parameters of limit switch unit DN.ru APL-210N

Name Meaning
Limit switch block model APL-210N
Ambient temperature, °C from -50 to 200
Service life, years 10

 

 

Table of parts and materials of the limit switch unit Elephant APL-210N:

No. Name Material
1 Frame cast aluminum
2 Indicator cap polyester plastic
3 3D indicator ABC plastic
4 Cam polyester plastic
5 Spring stainless steel
6 Screws stainless steel
7 Sealing rings NBR
8 Sleeve bronze
9 Ground terminal stainless steel
10 Shaft stainless steel

 

 

Main parameters of the Elephant AFC2000 air treatment unit

Working pressure, bar 8
Maximum pressure, bar 10
Adjustable pressure range, bar 0.5 ÷ 9
Destruction pressure, bar 15
Air connection 1/4"
Operating temperature, C from -5 to +60
Size of filtered particles, µm 40
Oil viscosity ISO VG 32
Weight, kg 0.395
Kit composition filter-moisture separator, pressure regulator, lubricator, bracket

Spezifikation

  • Country of origin
    China
  • Body material
    Stainless steel AISI 316
  • Connection type
    Compact flanged
  • Control type
    Pneumatic actuator
  • Operating environment
    Water, air, steam, steam, oils, industrial water, oil
  • Applications
    Heat supply
  • Nominal pressure
    16 bar
  • Type of seal
    PTFE / PTFE / Teflon
  • Coating type
    stainless steel
  • Locking material
    Stainless steel AISI 316
  • Explosion-proof
    No
  • Limit switches
    Yes
  • Type of pneumatic actuator
    double action

Bewertungen (0)

Documentation

Zahlung & Sicherheit

Zahlungsmethoden

    Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite

    Verfügbare Varianten

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-56560DN1516 bar €248,74 Out of stock
    D160-56561DN2016 bar €253,08 Out of stock
    D160-56562DN2516 bar €261,55 Out of stock
    D160-56563DN3216 bar €316,95 Out of stock
    D160-56564DN4016 bar €363,60 Out of stock
    D160-56565DN5016 bar €407,04 Out of stock
    D160-56566DN6516 bar €481,83 Out of stock
    D160-56567DN8016 bar €569,35 Out of stock
    D160-56568DN10016 bar €680,72 Out of stock

    Häufig gestellte Fragen

    Versand

    In welche Länder liefern Sie?

    Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.

    Wie lange dauert es, bis ich meine Bestellung erhalte?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).