Ball valves Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON BPV AFC2000 BKV APL-510N-EX

The ball valve is used as a shut-off valve in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) not aggressive to valve materials.

PA-DA-1 pneumatic actuators are designed for automation of control process of industrial shut-off valves - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.

Pneumatic valves 4M310-08 24 V are used for control in pneumatic systems having NAMUR docking surface, for installation of valves through through holes in the body.

The MON manual doubler with worm gear and HDM reduction gearbox allows manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.

The AFC2000 air treatment unit is designed to purify compressed air from dripping moisture and solid particles, remove condensate, automatically maintain pressure at a preset level, supply lubricant from a reservoir in the compressed air stream to pneumatic system elements with a large capacity range from 500 liters/minute to 10,000 liters/minute. The lubricator (oil atomizer) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components such as pneumatic cylinders and pneumatic valves.

The limit switch unitAPL-510N-EX is an electrotechnical device designed for opening and closing of the working circuit and for visualization of the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of fault detection.

Technical parameters Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON BPV AFC2000 BKV APL-510N-EX:

Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON BPV AFC2000 BKV APL-510N-EX

Dimensions and dimensions Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON BPV AFC2000 BKV APL-510N-EX:

Sketch of dimensions and dimensions Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON BPV AFC2000 BKV APL-510N-EX

Parts and materials table Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON BPV AFC2000 BKV APL-510N-EX:

Parts and material sketch Elephant BV3232P-FP-Fb-ISO-H 16 bar wafer, full bore, body - stainless steel SS316, seal - PTFE, with pneumatic drive PA-DA-052-105 pneumatic distributor 4M310-08 24V reducer MON BPV AFC2000 BKV APL-510N-EX

Technical data of PA-DA pneumatic actuators:

Parts and material sketch of the PA-DA pneumatic actuator

Technical parameters of the handwheel MON:

Manual doubler MON

Dimensions and dimensions of the handwheel MON:

Sketch of dimensions and dimensions of the MON handwheel MON

MON handwheel materials:

Materials of the handwheel

Technical characteristics of the pneumatic valve 4m310-08 24V:

Characteristics of limit switch unit APL-510N-EX: