Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG, body material - Stainless steel AISI 316, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA-105-1, 4V320-08 220V, BPV AFC2000
Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG, body material - Stainless steel AISI 316, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA-105-1, 4V320-08 220V, BPV AFC2000 - DN80 / 25 bar ist auf Lager und wird versandt, sobald es wieder verfügbar ist
Verfügbarkeit für Abholungen konnte nicht geladen werden
Lieferung und Versand
Lieferung und Versand
Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.
Beschreibung
Beschreibung
Ball valve Elephant BV3232P(3pc)-FP-W-ISO-H LONG is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves series BV3232P(3pc)-FP-W-ISO-H LONG is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.
Pneumatic actuator Elephant PA-DA-105-1 of double action is designed for automation of control process of industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
Elephant 4V320-08 220V pneumatic valve DN.ru 4V320-08 is used to change direction, start, stop compressed air flows in pneumatic system depending on external control action.
The AFC2000 air treatment unit is designed to clean compressed air from moisture and solid particles, remove condensate, automatically maintain pressure at a preset level, and supply lubricant from a reservoir in the compressed air stream to pneumatic system components with a large capacity range from 500 litres/minute to 10,000 litres/minute. The lubricator (oil atomiser) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic valves.
Technical parameters of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG with double-acting pneumatic actuator PA-DA-105-1, pneumatic valve 4V320-08 220V, BPV AFC2000:
Name | Meaning |
Working environment temperature, °C | from -20 to 180 |
Type of crane device | two-way |
Application | water supply, heat supply, industry |
Working environment | water, steam, petroleum products, neutral media, gaseous media |
Connection to the pipeline | for welding |
Water intake | No |
Type of flow section | full bore |
Control type | With pneumatic drive |
Joining | for welding |
Control | double acting pneumatic actuator |
Availability of pneumatic distributor | There is |
Sketch of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG with double-acting pneumatic actuator PA-DA-105-1, pneumatic valve 4V320-08 220V, BPV AFC2000
Dimensions and dimensions of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG with pneumatic actuator PA-DA-105-1 double-acting, pneumatic valve 4V320-08 220V, BPV AFC2000:
DN, mm | L, mm | D, mm | F, mm | L1, mm | X, mm | Y, mm |
80 | 302 | 88.9 | 153 | 495 | 88 | 162 |
100 | 326 | 114.3 | 153 | 495 | 88 | 162 |
Detail and material sketch of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG
Table of parts and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG:
Item No. | Part name | Material |
1 | Frame | Stainless steel 316 |
2 | Side element (2 pcs) | Stainless steel 316 |
3 | Ball | Stainless steel 316 |
4 | Ball seal | PTFE |
5 | Rod seal | PTFE |
6 | Sleeve | stainless steel 304 |
7 | Stock | Stainless steel 316 |
8 | Washer | stainless steel |
9 | screw | steel A2-70 |
10 | Bolt | steel A2-70 |
Pneumatic actuator Elephant PA-DA-105-1 double acting
Technical parameters of the PA-DA-105-1 double-acting pneumatic actuator:
Name | Meaning |
Model | PA-DA-105-1 |
Design | double acting |
Control pressure, bar | 2 ÷ 8 |
Sketch of parts and materials of the pneumatic actuator Elephant PA-DA-105-1 double acting
Table of parts and materials of the pneumatic actuator Elephant PA-DA-105-1 double acting:
No. | Part name | Material |
1 | Indicator screw | ABS (plastic) |
2 | Position indicator | ABS (plastic) |
3 | Spring clamp | Stainless steel 304 |
4 | Washer | Stainless steel 304 |
5 | Outer washer | Engineering plastic |
6 | Adjusting screw | Stainless steel 304 |
7 | screw | Stainless steel 304 |
8 | Washer | Stainless steel 304 |
9 | Frame | Extruded aluminum |
10 | Piston | Aluminum, die casting |
11 | Piston sealing ring | NBR |
12 | Bearing group | Engineering plastic |
13 | End Cap O-Ring | NBR |
14 | End cap | Cast aluminum coated with polyester paint |
15 | Fastening screw | Stainless steel 304 |
16 | Internal washer | Engineering plastic |
17 | Sealing ring | NBR |
18 | Bearing | Engineering plastic |
19 | Fixator | Alloy steel |
20 | Gear | Alloy steel |
21 | Bearing | Engineering plastic |
22 | Sealing ring | NBR |
Technical parameters of the Elephant 4V320-08 220V pneumatic valve
Name | Meaning |
Type of pneumatic distributor | spool valve |
Model of pneumatic distributor | 4V320-08 220V |
Working pressure, bar | 1.5 ÷ 1.8 |
Supply voltage, V | 220 V |
Response frequency, cycles/sec | 5 |
Main parameters of the air preparation unit Elephant AFC2000
Working pressure, bar | 8 |
Maximum pressure, bar | 10 |
Adjustable pressure range, bar | 0.5 ÷ 9 |
Destruction pressure, bar | 15 |
Air connection | 1/4" |
Operating temperature, C | from -5 to +60 |
Size of filtered particles, µm | 40 |
Oil viscosity | ISO VG 32 |
Weight, kg | 0.395 |
Kit composition | filter-moisture separator, pressure regulator, lubricator, bracket |
Spezifikation
Spezifikation
-
Country of origin
-
Body material
-
Maximum allowable temperature
-
Connection type
-
Control type
-
Operating environment
-
Applications
-
Nominal pressure
-
Type of seal
-
Locking material
-
Type of pneumatic actuator
-
Angle of rotation
Bewertungen (0)
Bewertungen (0)
Documentation
Documentation
Zahlung & Sicherheit
Zahlungsmethoden
Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite
Häufig gestellte Fragen
Versand
In welche Länder liefern Sie?
In welche Länder liefern Sie?
Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.
Wie lange dauert es, bis ich meine Bestellung erhalte?
Wie lange dauert es, bis ich meine Bestellung erhalte?
Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).
Returns and Refunds
How do I return a product?
How do I return a product?
Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.
How long will it take to receive my refund?
How long will it take to receive my refund?
Refunds are processed within 7 days from when we receive the item(s).