Ball valves Elephant BV3232P(3pc)-FP-F-ISO-H, body material - Stainles – Valve Elephant
Elephant  |  SKU: D160-56740

Ball valves Elephant BV3232P(3pc)-FP-F-ISO-H, body material - Stainless steel AISI 316, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON

€286,49
inkl. MwSt. Versand wird beim Checkout berechnet.

Lieferung und Versand

Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.

Wenn Sie Fragen zu unseren Produkten, Lieferoptionen oder anderen Themen haben, zögern Sie nicht, uns zu kontaktieren.

Beschreibung

Ball valve Elephant BV3232P(3pc)-FP-F-ISO-H is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of BV3232P(3pc)-FP-F-ISO-H series valves is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) that are not aggressive to valve materials.

Double-acting pneumatic actuator Elephant PA-DA is designed for automation of control process of industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.

Elephant 4V320-10 220V pneumatic valve Elephant 4V320-10 220V is used to change the direction, start and stop of compressed air flows in a pneumatic system depending on external control action.

The Elephant MON manual doubleturn valve with worm gear and HDM reduction gearbox enables manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.

 

 

Technical parameters of ball valves Elephant BV3232P(3pc)-FP-F-ISO-H with double-acting pneumatic actuator PA-DA, pneumatic valve 4V320-10 220V, manual double-acting MON:

Name Meaning
Working environment temperature, °C from -20 to 180
Type of crane device two-way
Application water supply, heat supply, pneumatic systems
Working environment water, steam, petroleum products, liquid media, neutral media, gaseous media
Connection to the pipeline flanged
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining flanged
Control double acting pneumatic actuator
Availability of pneumatic distributor There is



 

Sketch of ball valves Elephant BV3232P(3pc)-FP-F-ISO-H with double-acting pneumatic actuator PA-DA, pneumatic valve 4V320-10 220V, manual override MON

 

Dimensions and dimensions of ball valves Elephant BV3232P(3pc)-FP-F-ISO-H with double-acting pneumatic actuator PA-DA, pneumatic valve 4V320-10 220V, manual override MON:

DN, mm L, mm D, mm F, mm L1, mm E, mm
15 130 95 98 153 120
20 150 105 98 153 120
25 160 115 98 153 120
32 180 140 98 153 120
40 200 150 115 174 120
50 230 165 135 216 133
65 290 184 160 279 180
80 310 200 160 279 180
100 350 220 193 308 180

 

 

Detail and material sketch of ball valves Elephant BV3232P(3pc)-FP-F-ISO-H

 

Table of parts and materials for ball valves Elephant BV3232P(3pc)-FP-F-ISO-H:

Item No. Detail Material Quantity
1 Frame steel SS304 / SS316 1
2 Ball valve steel S304 / S316 1
3 Bolt steel S201 / S304 4~6
4 screw steel S201 / S304 6~12
5 Sealing PTFE 1
6 Stock steel SS304 / SS316 1
7 Seal steel S201 / S304 1
8 Lid steel WCB/CF8/CF8M 2
9 Saddle rings PTFE 2
10 Thrust washer PTFE 1

 

 

Technical parameters of the PA-DA double-acting pneumatic actuator:

Name Meaning
Model PA-DA
Design double acting
Control pressure, bar 2 ÷ 8
Availability of manual backup steering wheel

 

 

Sketch of parts and materials of Elephant PA-DA double-acting pneumatic actuator

 

Parts and materials table for double-acting pneumatic actuator Elephant PA-DA:

No. Name Material
1 Frame extruded aluminum
2 Side plugs cast aluminum
3 Gear stainless steel
4 Piston steel/aluminum
5 Plugs stainless steel
6 Piston ring NBR
7 Springs spring steel
8 Piston bearing engineering plastic
9 Piston ring NBR
10 Plug NBR
11 Thrust ring engineering plastic
12 Ring engineering plastic
13 Washer stainless steel
14 Spring clamp stainless steel
15 Indicator plastic
16 Indicator housing plastic
17 Bearing engineering plastic
18 Cam steel
19 Bearing NBR
20 Bearing engineering plastic
21 Bearing engineering plastic
22 Sealing ring NBR
23 Sealing ring NBR
24 Bearing stainless steel
25 Adjusting nut stainless steel
26 Adjustment screw stainless steel
27 Sleeve aluminum

 

 

Technical parameters of pneumatic valve Elephant 4V320-10 220V

Name Meaning
Type of pneumatic distributor spool valve
Model of pneumatic distributor 4V320-10 220V
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220 V
Response frequency, cycles/sec 5

 

 

Sketch of the Elephant MON handwheel.

 

Technical parameters of Elephant MON handwheels:

Name Meaning
Degree of protection, IP 67
Connection type ISO 5211

 

 

Sketch of parts and materials for the Elephant MON handwheel.

 

Parts and materials table for the Elephant MON handwheel:

No. Name Material
1 Rod for mounting a pneumatic actuator Steel 45
2 Sealing ring EPDM
3 Locking spring Spring steel
4 Top end cap Aluminum alloy
5 Screw Steel 304
6 Fixing bracket (main rod) Steel 304
7 Frame Aluminum alloy
8 Sealing ring EPDM
9 Reducer Cast iron VCh50
10 Transition coupling Cast iron VCh40
11 Gearbox rod Cast iron VCh40

Spezifikation
  • Country of origin
    China
  • Body material
    Stainless steel AISI 316
  • Maximum allowable temperature
    180 °C
  • Connection type
    Flanged
  • Control type
    Pneumatic actuator
  • Operating environment
    Water, steam, oil products, liquid media, neutral media, gaseous media
  • Applications
    Water supply, heating, pneumatic systems
  • Nominal pressure
    40 bar
  • Type of seal
    PTFE / PTFE / Teflon
  • Coating type
    uncoated
  • Locking material
    Stainless steel AISI 316
  • Manual override
    Handwheel
  • Type of pneumatic actuator
    double action
  • Angle of rotation
    90°

Bewertungen (0)

Documentation

Zahlung & Sicherheit

Zahlungsmethoden

    Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite

    Verfügbare Varianten

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-56740DN1540 bar €286,49 Out of stock
    D160-56741DN2040 bar €302,64 Out of stock
    D160-56742DN2540 bar €280,91 Out of stock
    D160-56743DN3240 bar €323,12 Out of stock
    D160-56744DN4040 bar €312,42 Out of stock
    D160-56745DN5040 bar €402,95 Out of stock
    D160-56746DN6525 bar €549,95 Out of stock
    D160-56747DN8025 bar €642,63 Out of stock
    D160-56748DN10016 bar €915,45 Out of stock

    Häufig gestellte Fragen

    Versand

    In welche Länder liefern Sie?

    Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.

    Wie lange dauert es, bis ich meine Bestellung erhalte?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).